• Journal of Power Electronics
• /
• v.6 no.4
• /
• pp.356-365
• /
• 2006

This paper presents an improved three-phase PFC power rectifier with a three-phase diode rectifier cascaded four-switch boost converter. Its operating principle contains the operating principle of two conventional three-phase PFC power rectifiers: one switch boost converter type and a two switch boost converter type. The operating characteristics of the four switch boost converter type three-phase PFC power rectifier are evaluated from a practical point of view, being compared with one switch boost converter type and two switch boost converter topologies.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.136-145
• /
• 2000

The objective of this study is to evaluate the human performance relating to the layouts of the two different hand switch types with two and three buttons in the nuclear power plants. Using a computer simulation, the cognitive performance for the hand switch layouts was measured on the basis of response and task completion times. Comparative analyses were performed with three different layouts representing the current switch arrangements in the Yonggwang nuclear plants 5 and 6 and Ulchin 3 and 4, respectively. Statistical analyses revealed that the performance of the two-buttoned switch layouts was found to be better than those of the three-buttoned switch. Furthermore, the superiority of the two-buttoned switch type is consistent regardless of various layout types. These results imply that the difference of the cognitive performance can be attributable to the switch types rather than to the switch layouts. Therefore, from the cognitive perspective, the two-buttoned switch type is recommended for future power nuclear plants.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.411-414
• /
• 2014

A switch is one of the most useful circuits for controlling the path of signal transmission. It can be added to digital circuits to create a kind of gate-level device and it can also save information into memory. In RF subsystems, a switch is used in a different way than its general role in digital circuits. The most important characteristic to consider when designing an RF switch is keeping the isolation as high as possible while also keeping insertion loss as low as possible. For high isolation, we propose leakage signal cancellation and inductive switching for designing a singlepole double-throw (SPDT) RF switch. By using the proposed method, an isolation level of more than 23 dB can be achieved. Furthermore, the heterojunction bipolar transistor (HBT) process is used in the RF switch design to keep the insertion loss low. It is demonstrated that the proposed RF switch has an insertion loss of less than 2 dB. The RF switch operates from 1 to 8 GHz based on the $0.18-{\mu}m$ SiGe HBT process, taking up an area of $0.3mm^2$.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.2
• /
• pp.126-133
• /
• 2004

In this paper, a new current control algorithm is proposed for four-switch three-phase brushless DC(BLDC) motor drives, which are suitable for low cost applications. A current reference generation scheme is developed and implemented to obtain high performance characteristics in the four-switch system, such as small torque ripple and fast dynamic speed/torque response. Especially, the proposed scheme can successfully reduce the torque ripple during commutations, so that it can be expected that the four-switch system can be much more practically applied for the industrial application areas.

• Management Science and Financial Engineering
• /
• v.4 no.2
• /
• pp.43-58
• /
• 1998

Packet switch is a key component in high speed digital networks. This paper investigates congestion phenomena in the packet switching with input buffers. For large value of switch size N, mathematical models have been developed to analyze asymptotic maximum switch throughput under nonuniform traffic. Simulation study has also been done for small values of finite N. The rapid convergence of the switch performance with finite switch size to asymptotic solutions implies that asymptotic analytical solutions approximate very closely to maximum throughputs for reasonably large but finite N. Numerical examples show that non-uniformity in traffic pattern could result in serious degradation in packet switch performance, while the maximum switch throughput is 0.586 when the traffic load is uniform over the output trunks. Window scheduling policy seems to work only when the traffic is relatively uniformly distributed. As traffic non-uniformity increases, the effect of window size on throughput is getting mediocre.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.131-143
• /
• 1996

In this paper, we propose the improved structure of fully interconnected ATM Switch to develop the small sized switch element and represent practical implementation of switch network. As the part II of the full study about structure and implementation of fully interconnected ATM Switch, this paper especially describes the implementation of an ATM switching element with 8 input port and 8 output port at 155 Mbits/sec each. The single board switching element is used as a basic switching block in a small sized ATm switch for ATM LAN Hub and customer access node. This switch has dedicated bus in 12 bit width(8 bit data + 4 bit control signal) at each input and output port, bit addressing and cell filtering scheme. In this paper, we propose a practical switch architecture with fully interconnected buses to implement a small-sized switch and to provide multicast function withoutany difficulty. The design of switching element has become feasible using advanced CMOS technology and Embedded Gate Array technology. And, we also represent Application Specific Integrated Circuit(ASIC) of Switch Output Multiplexing Unit(SOMU) and 12 layered Printed Circuit Board for interconnection network of switch.

• Electronics and Telecommunications Trends
• /
• v.10 no.1 s.35
• /
• pp.113-122
• /
• 1995

현재 발표된 공간 광스위치 구조들은 전자 스위치 및 전자 통신 분야에서 많이 이용된 Clos, Benes, Banyan, omega, shuffle network 등을 directional coupler switch, TIR(total internal reflection) switch, cross X switch 등 여러가지 단위 광스위치를 이용하여 고안한 것으로 서로 다른 장단점을 갖고 있다. 따라서 4 X 4나 8 X 8, 또는 그 이상의 확장된 광스위치를 제작하기 위해서는 이러한 기존 구조에 대한 조사 및 분석이 선행되어야 한다. 본 논문은 현재 개발되어 발표된 광스위치의 구조들을 조사하여 특성을 비교하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.4
• /
• pp.366-373
• /
• 2011

The magnetic switch used in pulsed-power applications is superior in its high repetition rate, high stability, and long lifetime. But magnetic switch was optimized switching operation by manual control. When the load changes, the switching state can not be optimized automatically. In this paper, the auto control method of magnetic switch for high pulsed-power proposed. The magnetic switch is used capacitor charging power supply for high-voltage compressor. The proposed method can be optimized an efficiency of the system by magnetic switch auto control according to load variation. And the proposed method verify the experimental results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.431-434
• /
• 2004

The design, simulation, modeling and measurement of a RF switch module for GSM applications were presented in this paper. switch module were simulated by ADS and constructed using a LTCC multi-layer switching circuit and integrated low pass filter, designed to operate in the GSM band. Insertion and return losses at 900 MHz of the low pass filters were designed to lower than 0.3 dB and higher than 12.7 dB respectively. The switch module constructed, contained 10 embedded passives and 3 surface mounted components integrated on $4.6{\times}4.8{\times}1.2$ m volume, 6-layer integrated circuit. The insertion loss of switch module at m MHz were around 11 dB.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.6
• /
• pp.664-670
• /
• 2015

A four-times-VDD switch that supports high and low voltage mode operations is demonstrated in a generic 65 nm logic process. The proposed switch shows the robust operation for supply voltages ranging from VDD to $4{\times}VDD$. A cascaded voltage switch and a voltage doubler based charge pump generate the intermediate supply voltage levels required for the proposed high voltage switch. All the high voltage circuits developed in this work can be implemented using standard logic transistors without being subject to any voltage overstress.