• ETRI Journal
• /
• 제19권4호
• /
• pp.326-343
• /
• 1997

In this paper, we propose an ATM switch with the rate more than gigabits per second to cope with future broadband service environments. The basic idea is to separate the connection control flow from the data information flow inside the switch. The proposed switch has a dual-plane switch matrix with the synchronous control algorithm. The queuing behaviors of the proposed switch are shown by the discrete-time queuing analysis. Numerical analyses are taken both in the non-blocking crossbar switch and the banyan switch with internal blocking. Results show that a proposed dual-plane $16{\times}16$ switch would have the acceptable performance with maximum throughput of about 95 percent.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.357-360
• /
• 2003

In this paper, we investigated the characteristics of 4${\times}$4 thermo-optic switch using two mode interference(TMI) coupler. We designed this matrix switch by using a configuration which combines a double Mach- Zehnder interferometer(MZI) switching unit. The average extinction ratio and average excess loss of the 4${\times}$4 thermo-optic switch was 33.7dB, 0.29dB, respectively.

• 전자공학회논문지A
• /
• 제29A권10호
• /
• pp.8-16
• /
• 1992

Despite recent advances in electrical switch architectures, the practical switch performance is limited by both the technological and physical constraints of electrical device and wiring. Though an optical switch can have good features, optical devices are of poor quality. Therefore, we propose and study the switching architecture based on free-space optical interconnections and electrical logic devices. And an exchanging method using packets with a parallel form is introduced to solves the blocking problem of the switch that resulted from switching packets with a serial form. The free-space optical interconnections overcome the defects of electrical switch, such as, the complex connections of the wires. The proposed and demonstrated switch is nonblocking, simple and high performable. Other attractive features of the proposed switch include the guarantee of first-in first-out packet sequence. In this thesis, we also discuss the performance of proposed switch and show the experimental results of the 4$\times$4 switch.

• Journal of Magnetics
• /
• 제18권1호
• /
• pp.50-56
• /
• 2013

In this paper, the 6-switch inverter for the Flux-Reversal Motor (FRM) has been presented and compared to the 4-switch inverter for the FRM, which is more popular in cost effective applications. To analyze the FRM, we adopted the two-dimensional time-stepped voltage source finite element method (FEM) that uses the actual pulse width modulation (PWM) voltage waveforms as the input data. As the FRM characteristic analysis of actual pwm voltage input, the torque ripples and iron losses (eddy current and hysteresis loss) of the FRM can be precisely calculated. With the simulated and experimental results, the performance and limitations of the 4-switch FRM which is the cost effective drive compared to the 6-switch FRM drive are provided in more detail.

• 한국정보통신학회논문지
• /
• 제6권5호
• /
• pp.703-717
• /
• 2002

본 논문은 가변형 공유 버퍼 ATM 스위치의 구조 및 VLSI 구현에 관한 연구이다. 본 논문에서 설계한 단일 칩 공유 버퍼 ATM 스위치는 4ns접근속도의 가변형 파이프라인 방식 공유 버퍼를 내장하고 기존의 공유 버퍼 ATM 스위치들이 가지는 메모리 사이클 시간 제한을 해결한다. 내장 버퍼의 가변성을 이용하여 유연한 스위칭 성능을 지원하고 버퍼 메모리 제어와 주소 큐 제어의 독립성을 이용하여 포트 사이즈의 가변성을 제공한다. 제안된 ATM 스위치는 스위치 사이즈와 버퍼 사이즈의 가변성을 이용하여 복잡한 회로의 재설계 없이 용량 및 성능을 재구성할 수 있다. 0.6um CMOS 기술의 설계된 칩은 동작 주파수 800MHz, 640Mbps/port, 4 ${\times}$ 4 Switch Size를 지원한다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.146-149
• /
• 2003

In this Work, we have studied about an RSFQ 2$\times$2 crossbar switch. The circuit was designed, simulated, and laid out for mask fabrication The switch cell was composed of a splitter a confluence buffer, and a switch core. An RSFQ 2$\times$2 crossbar switch was composed of 4 switch cells, a switch control input to select the cross and bar, data input, and data outputs. When a pulse was input to the switch control input to select the cross or bar the route of the input data was determined, and the data was output at the proper output port. We simulated and optimized the switch-element circuit and 2$\times$2 crossbar switch, by using Xic and Julia. We also performed the mask layout of the circuit by using Xic and Lmeter.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2004년도 가을 학술발표논문집 Vol.31 No.2 (3)
• /
• pp.523-525
• /
• 2004

규모가 방대한 네트워크상에서 네트워크의 침입과 방어의 효과와 유용성을 알아보기 위해, 실존하는 네트워크상에서 직접 침입과 방어를 테스트하는 것은 많은 노력과 비용이 든다. 이와 같은 문제점을 극복하기 위해 인터넷 침입의 표현에 필요한 네트워크 침입 시뮬레이션을 하기 위한 SSFNet 확장 연구가 진행되었다. 본 연구는 SSFNet에 새로이 추가된 L4-Switch 모듈을 이전 연구에서 만들어진 모듈들과 함께 대규모 네트워크 환경에서 네트워크 침입 시뮬레이션을 테스트하였다. 본 시뮬레이션은 L4-Switch와 http클라이언트, http서비스를 제공하는 호스트들을 설정하고, load balancing이 잘 되었는지를 살펴보았다.

• 마이크로전자및패키징학회지
• /
• 제4권2호
• /
• pp.79-83
• /
• 1997

본 연구에서는 휴대용 전화기 및 무선 LAN 의 핵심부품인 RF-Switch Module의 초소형화 설계기술, 표면실장기술, 고주파설계기술, 소형화 SMD기술, Test 기술 및 RF-Switch Module 활용기술 등을 개발하였으며 RF-Switch Module의 설계기반 마련 및 대외 경쟁력 있는 RF-Switch Module의 초소형화 기술을 확보하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1673-1675
• /
• 2004

The design, modeling and measurement of RF switch module for GSM applications is presented in this paper. RF switch module is constructed using a LTCC multi-layer switching circuit and integrated low pass filter. Insertion and return loss of the low pass filter were designed less than 0.3 dB and better than 12.7 dB at 900 MHz. The RF switch module contained 10 embedded passives and 3 surface mount components integrated on $4.6{\times}4.8{\times}1.2$ mm, 6-layer multi-layer integrated circuit. The insertion loss of switch module was measured at 900 MHz was 11 dB.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.90-94
• /
• 2013

A low loss power dividing switch in a indoor microwave power distribution system is proposed and designed with a various power dividing ratio. Switching characteristics are analyzed by use of the S-parameter of the switch. Newly proposed switch showed a very low return loss less than -30dB at the operating frequency of 2.45GHz. Three kinds of the switch in which we take out individually 1/2, 1/3 and 1/4 of the input power were fabricated, and measured the delivered, transmitted, and return loss power ratio. Simulated results showed that the lower power ratio is, the better accurate operating performance shows. This switch can switch the input power from 4.5% to 58% with the variance of 5% output power. The experimental results are in good agreement with the simulation within the return loss of 1%.