• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.9
• /
• pp.73-80
• /
• 2005

This paper addresses a newly proposed start-up method of the HAUSAT-2 momentum wheel. The HAUSAT-2 is a 25kg class nanosatellite which is stabilized to earth pointing by 3-axis active control method. A momentum wheel performs two functions. It provides a pitch-axis momentum bias while measuring satellite pitch and roll attitude. Pitch control is accomplished in the conventional way by driving a momentum wheel in response to pitch attitude errors. Precession control and nutation damping are provided by driving the pitch axis magnetic torquer. A momentum wheel is nominally spinning at a particular rate and changes speed. This simulation study investigates the feasibility and performance of a proposed strategy for starting-up the wheel. A proposed strategy to start-up the wheel shows that a pitch momentum wheel can be successfully started-up to its nominal speed from rest and be stabilized to nadir pointing.

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.644-651
• /
• 2015

To enhance the consumption of horse meat, its nutritional composition was analyzed and compared to that of white meat (i.e., chicken and duck), which consumers consider healthy. Horse meat samples used in the experiment were classified by breed and grade as follows: Jeju horse (grade $1^+$ and 1), Jeju crossbred horse (grade 1 and 2), Thoroughbred (no grade), and cuts (loin, chuck roll, and arm picnic). In an analysis of general components and cholesterol, the horse meat was confirmed as a low-fat, high-protein, and low-cholesterol food material. In an amino acid analysis, horse meat contained a higher proportion of essential amino acids than white meat. The fatty acid compositions were also analyzed. The content of linolenic acid, an essential fatty acid, was significantly higher in all horse meat groups than in Ross chicken and Pekin duck meat. The content of palmitoleic acid showed similar results. In a mineral analysis, the levels of Fe and Zn in horse meat were higher than those of white meat. The mineral content was as follows except for the leg of shite meat: K > P > Na > Mg > Ca > Zn > Fe.

• Resources Recycling
• /
• v.29 no.2
• /
• pp.28-36
• /
• 2020

To enhance the recycling rate of wasted glass bottles toward recycled aggregates, the study would decide optimal comminution equipment based on the particle size distribution, aspect ratio and equipment energy analysis. The impact, compress and abrasion is type of generated force by comminution. So, hammer crusher, shredder, roll crusher and ball mill have been selected because they have characteristic which is each type of force. As a result of the particle size analysis of each product, only the shredder product satisfied concrete and asphalt aggregate quality standard condition. Also, as a result of aspect ratio analysis using Imaging software program (Image J, National institute of health), most of size fraction is confirmed under 1.6 value. It was confirmed that the product has low dangerousness and satisfying to shpage index. Also, the particle reduction ratio against input energy of shredder product was the most high. Therefore, we can decide that the optimal equipment which applicable for comminuting waste glass bottle in certain particle size under 10mm is shredder. The result of study will make contribution to increasing energy efficiency of comminution processing and competitiveness of product.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.346-346
• /
• 2007

압전세라믹 재료는 현재 압전 변압기, actuator, transducer, sensor, speaker 등에 광범위하게 이용이 되고 있다. 이 중에서 압전세라믹 소결체를 이용한 스피커의 제조는 가공이 까다롭고, 대형의 크기로 제작 시 소자가 깨지는 등의 많은 제약을 받고 있으며, 저음 특성이 떨어져 응용 범위가 한정되어 있다. 따라서 최근에는 이러한 단점을 극복하기 위하여 세라믹/고분자 복합체를 이용한 필름 스피커를 제작하고자 시도하고 있다. 이러한 세라믹/고분자 0-3형 압전 복합체를 이용할 경우, 제품의 경량화를 실현할 수 있고, 크기나 환경의 영향을 거의 받지 않으므로, 고기능성 스피커로의 응용에 적합할 것으로 보인다. 따라서 본 연구에서는 PZT계의 세라믹와 PVDF, PVDF-TrFE, Polyester, acrylic resin 등의 여러 고분자 물질과의 복합체를 제조하여 압전특성을 평가하였다. 본 실험은 먼저 $(Pb_{1-a-b}Ba_aCd_b)(Zr_xTi_{1-x})_{1-c-d}(Ni_{1/3}Nb_{2/3})_c(Zn_{1/3}Nb_{2/3})_dO_3$ (이하 PZT라 표기)의 최적화 조성을 선택하여, $1050^{\circ}C$에서 소결된 분말을 48시간 ball milling방법 로 약 $1{\mu}m$ 크기로 분쇄하였다. 고분자 물질들은 알맞은 용제들을 선택하여 녹였다. 그 다음 소결된 PZT분말과 고분자를 50:50, 60:40, 65:35, 70:30등의 무게 분율로 혼합하고, 분산제, 소포제 등을 첨가하여 3단 roll mill을 이용하여 충분히 분산시켜 페이스트 (Paste)를 제조하였다. 제조된 페이스트를 ITO가 코팅된 PET필름 위에 스크린 프린팅 법을 사용하여 인쇄하여 $120^{\circ}C$에서 5분간 건조하였다. 코팅된 복합체의 두께는 약 $80{\mu}m$ 정도로 측정되었다. Ag 페이스트를 이용한 상부 전극 형성에도 스크린 프린팅 법을 적용하였다. 이를 $120^{\circ}C$에서 4 kV/mm의 DC 전계로 분극 공정을 수행한 후 전기적 특성을 평가하였다. 유전특성을 조사하기 위해서 LCR meter (EDC-1620)를 사용하였고, 시편의 결정구조는 XRD (Rigaku; D/MAX-2500H)을 통해 분석하였으며, 전자현미경(SEM)을 이용하여 미세구조를 분석하였다. 압전 전하상수$(d_{33})$ 값은 APC 8000 모델을 이용하여 측정하였다. PZT의 혼합비가 증가할수록 비유전율 및 압전 전하 상수 등의 전기적 특성이 증가되었다. 또 여러 고분자 물질 중에서 PVDF-TrFE 수지가 가장 우수한 특성을 보였다. 이는 PVDF-TrFE 수지가 압전성을 나타내기 때문인 것으로 판단되었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.221-231
• /
• 2021

In the present study, numerical simulation was performed to investigate aerodynamic characteristics of a ducted fan-upper/lower vanes system in hover. Sensitivity analysis of aerodynamic forces for a system component was conducted with the deflection angle of upper vanes varying but at the constant rotational speed and the collective pitch angle of fan blades. Then, vane control performance and duct airload distributions were analyzed in detail to physically understand operating mechanisms of individual vane and interference effect between duct and vanes. Finally, new control concept of operating upper vanes has been proposed to improve the control performance of the full configuration. It is found that the side force and rolling moment of upper vanes increase linearly with the variation of those deflection angle; however, the total side force is significantly small due to the reaction force acted on the duct. It is also found that upper vanes close to the duct contraction side have a key role in changing vane control forces. It is revealed that the duct suction pressure is induced by the interaction with the suction side of upper vanes, while duct pressure recovery by the interaction with the pressure side, leading to increase in duct asymmetric force. When four upper vanes are kept in situ at 0° deflection angle or removed, the total control performance was improved with duct asymmetric force reduced and the total magnitude of roll remarkably increasing up to 80%.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.889-901
• /
• 2021

The tension of cables and motion response significantly affect safety of an immersed tunnel element in the immersion process. To investigate those, a hydrodynamic scale-model test was carried out and the model experiments was conducted under wind, current and wave loads simultaneously. The immersion standby (the process that the position of the immersed tunnel element should be located before the immersion process) and immersion process conditions have been conducted and illustrated. At the immersion standby conditions, the maximum force of the cables and motion is much larger at the side of incoming wind, wave and current, the maximum force of Element-6 (6 cables directly tie on the element) is larger than for Pontoon-8 (8 cables tie on pontoon of the element), and the flexible connection can reduce the maximum force of the mooring cables and motion of element (i.e. sway is expecting to decrease approximate 40%). The maximum force of the mooring cables increases with the increase of current speed, wave height, and water depth. The motion of immersed tunnel element increases with increase of wave height and water depth, and the current speed had little effect on it. At the immersion process condition, the maximum force of the cables decrease with the increase of immersion depth, and dramatically increase with the increase of wave height (i.e. the tension of cable F4 of pontoons at wave height of 1.5 m (83.3t) is approximately four times that at wave height of 0.8 m). The current speed has no much effect on the maximum force of the cables. The weight has little effect on the maximum force of the mooring cables, and the maximum force of hoisting cables increase with the increase of weight. The maximum value of six-freedom motion amplitude of the immersed tunnel element decreases with the increase of immersion depth, increase with the increase of current speed and wave height (i.e. the roll motion at wave height of 1.5 m is two times that at wave height of 0.8 m). The weight has little effect on the maximum motion amplitude of the immersed tunnel element. The results are significant for the immersion safety of element in engineering practical construction process.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.12
• /
• pp.1949-1957
• /
• 2013

The contents of ${\beta}$-carotene and retinol in processed and restaurant foods, such as Korean noodles, mandus, rice cakes and bread products, were quantified by high-performance liquid chromatography (HPLC) with UV/visible and fluorescence detector, respectively. Samples were collected from different local areas (i.e. Gangwon-do, Gyeonggi-do, Gyeongsang-do, Seoul, Jeolla-do, and Chungcheong-do). After homogenization, samples were hydrolyzed by direct alkali saponification; thereafter, fat-soluble components were extracted by a mixture of n-hexane/ethylacetate (85:15, v/v), containing 0.01% butylated hydroxytoluene (BHT). ${\beta}$-carotene and retinol contents in infant formula used as an in-house material for the analytical quality control. Among 14 Korean noodles, high contents of ${\beta}$-carotene were found in Bibim-Guksu (average 442.43 ${\mu}g/100g$) and Jjolmyeon (average 301.39 ${\mu}g/100g$). In 4 Korean mandus, the highest contents of ${\beta}$-carotene was determined in Kimchi-mandu (average 197.64 ${\mu}g/100g$), resulting in 33.3 RE of the converted vitamin A. Among 12 Korean rice cakes, Maeun-Tteokbokki and Modm-Chaltteok contained relatively high content of ${\beta}$-carotene with 205.11 and 41.33 ${\mu}g/100g$, respectively, while retinol was detected only in Maeun- Tteokbokki (1.65~10.45 ${\mu}g/100g$). In addition, among 8 bread products, 77.3 RE of pastry, 51.2 RE of buttercream- bread, and 41.4 RE of morning roll were found as the contents of the converted vitamin A.

• Journal of the East Asian Society of Dietary Life
• /
• v.12 no.2
• /
• pp.107-122
• /
• 2002

The purpose of this study was to develop menus for daily intake of 25g soybean protein and to analyse nutrients of these foods. Analytical values were compared to the theoretical one using the flood composition table and recommended dietary allowances for Koreans (7th revision). The results are as follows. 1. Soybean curd residue stew, Soybean curd, Kimchi saute, and hard boiled soybean and lotus root were selected for the menu for January, of which the content of soy bean protein(SBP) was 33.1g, soybean stew, soybean curd and soybean sprout saute, and Italian deep fried soybean curd were fur February, of which the content of SBP was 35.0g. The content of SBP in soybean paste soup with soybean curd, fried soybean curd and fried soybean curd roll, the menu for March, was 24.9g. That of April were soybean curd gratin with soymilk, soybean curd and ham with garlic dressing and the content of SBP was 26.3g. That of May were soybean porridge, soybean flour cake with honey (Dasik), soybean sprout soup and the content of SBP was 26.7g. That of June were soymilk, pan-fried soybean curd, steamed soybean curd with chicken and the content of SBP was 28.4g. That of July were noodle with soymilk, mapatofu, soybean curd salad and the content of SBP was 24.7g. That of August were soybean sprout with mustard dressing, Tossed green pepper with raw soybean flour, Tofu and Kimchi stew, soybean curd steak and the content of SBP was 26.2g. That of September were Chinese cabbage soup with raw soybean flour, sweet and sour tofu and the content of SBP was 23.2g. That of Oct. were Fermented soybean stew, soybean pan cake and the content of SBP was 24.3g. That of November were not-pressed soybean curd casserole, pan-fried mashed soybean curd with egg, stir frying deep-fried soybean curd with vegetables and the content of SBP was 22.4g. That of December were soybean curd and mushroom casserole, fried soybean curd and vegetables, hard boiled soybean curd and the content of SBP was 28.9g. 2. The ratio of the analytical value over theoretical value (A/B%) of one serving in kcal, carbohydrate, protein, fat ash and dietary fiber were 57.7~107.7% 42.9~131.9%, 79.2~118.3%, 54.5~ 100%, 40.7~80.8% and 42.1~113.2%, respectively.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.85-94
• /
• 2005

The purpose of this research is the activation proposal about the local design innovation center that was established as a national design policy For this proposal, I have to research about the established process of local design innovation center and then, I analyzed the present condition of local design innovation center for the promoting plan. As a result, we must establish three basic elements to activate the local design center. the first, we have to know the local characteristic. the second, we have to make up the management direction of local design center the third, we have to get the sympathy from the local administration and local people for the positive support. With above conditions, the local design innovation center have to arrange infra elements. (1) design developing facilities for the lending to the local designer, (2) professional designer for the developing of design industry, (3) program development for various activities, (4) the trend research for supply to local company, (5) design one stop service support, (6) the network foundation construction between design administration and design company for the active communication, (7) the innovation of design center for the benefit model, (8) the local design policy establishment with local administration, (9) the independent management of responsibility for the fulfillment For the promotion of the local design innovation center have to make efforts continually with below listed elements. 1. Design supporting for the local industry 2. Various design campaign for the spreading of public recognition about design 3. The supporting for design company and local company with established facilities and expensive equipments. 4. The construction of design information infra for local company 5. The development of new program about the connection between industry and university. 6. The development of local characteristic and local image innovation to make new local where we are.

• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.440-449
• /
• 2007

This study was conducted to investigate the compositions of different cuts of Hanwoo bull beef. 10 cuts [Abjin (short plate), Bosup (top sirloin), Cheggt (striploin), Dngsim (loin), Guri (chuck tender), Hongduke (eye of round), Moksim (chuck roll), Sulgit (bottom round), Udoon (top round), Yangi(brisket)] were prepared from 10 Hanwoo bulls (-24 month old) slaughtered during 3 consecutive days. There were no significant differences in the calorie contents among the 10 cuts (p<0.05). In cholesterol content, Hongduke was significantly lower (26.74 mg/100 g) and Abjin was significantly higher (31.08 mg/100 g) than the other cuts (p<0.05). Free amino acid analysis revealed that there were high contents of glutamate (94.33-216.36 mg/100 g) and alanine (154.88-200.31 mg/100 g), followed by arginine, phenylalanine and lysine in the 10 cuts. In addition, Abjin, Bosup, Cheggt, Hongduke, Sulgit and Udoon had significantly higher inosine monophosphate (IMP) contents than Dngsim or Moksim (p<0.05). Inosine contents were highest in Bosup and Sulgit, whereas hypoxanthine contents were highest in Guri (p<0.05). Total collagen contents were significantly higher in Abjin followed by Yangi, Guri and Moksim (p<0.05). With regard to fatty acid composition, Dngsim had significantly higher $C_{18:0}$ than the other cuts, and Udoon had significantly higher $C_{20:4n6}$ than the other cuts (p<0.05). Total contents of saturated fatty acids (SFA) were significantly higher in Abjin, Dngsim and Yangi, whereas total contents of unsaturated fatty acids (UFA) were significantly higher in Hongduke than the other cuts (p<0.05).