• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.129-135
• /
• 2009

In this paper, a finite element model is presented for the prediction of roll force and strip thickness in a backup-roll-drive mill. The proposed FE model is focused mainly on analyzing the elastic/plastic behavior between a work roll and a strip as well as the rigid/plastic behavior between a backup roll and a work roll. The capability of the proposed model is demonstrated through application to 4-high silicon steel rolling mill at POSCO. Results show that the predicted roll force and strip thickness rolled accurately agree with the measured them. It is also illustrated that the proper position of work roll displaced to one side from the vertical centerline of the backup-roll may be determined by minimizing the horizontal force of work roll.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.512-521
• /
• 1998

The roll characteristic of railway vehicle is an important factor that affects the roll-over of vehicle and lateral ride comfort of passenger. Generally the roll characteristics of railway vehicle is defined by the term of roll-coefficient, s, which represents the ratio of incline or carbody to that of rail-cant. The limit values of roll coefficient recommended in UIC Bre 0.4 for coach without pantograph and 0.15 for vehicle with pantograph. The roll coefficient can be calculated by VAMPIRE that is the well-known commercial software for analysis of dynamic behavior of railway vehicle. The value of roll coefficient is effected by height of gravity center of carbody, stiffness of primary and secondary suspension and etc. The calculated roll-coefficient for electric locomotive and passenger coach is 0.12 and 0.77 respectively, The additional equipment such as anti-roll bar is considered in order to decrease roll-coefficient of passenger coach. In relation to roll characteristics, the analysis for roll-over due to wind is a1so performed. The results show that roll-characteristics affect the roll-over of vehicle.

• 대한기계학회논문집
• /
• 제16권4호
• /
• pp.819-827
• /
• 1992

본 연구에서는 전술한 바와 같은 반복되는 압연부하에 의한 롤의 피로특성을 규명하기 위해 열연공장의 조압연기중 표본작업 롤의 피로특성을 규명하기 위해 열연 공장의 조압연기중 표본 작업 롤을 선정하고 일정기간의 사용이력을 조사하였으며, 이 를 토대로 롤내부 온도 및 열응력 계산을 수행하여 압연중 발생되는 피로 균열의 크기 를 정량화 시켜보았다. 또 표면 균열관찰 실험 및 롤 표면흠 대응 실험을 통해 피로 균열이 압연판의 표면품질에 어떠한 영향을 미치는지 조사해보았다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.115-118
• /
• 1997

Recently, hot rolling oil lubrication technology is required to face with the new environments such as the rapid introduction of high wear resistent high speed steel roll the development of continuous hot rolling technology. In the hot strip mill, according to rolling and quality required conditions are constrict, Roll material of hot rolling finishing stand is changing Hi-Cr Roll to High Speed Steel [HSS] Roll. The problem of HSS Roll of roll force and strip scale defects are increasing in hot strip mill, So we have tested HSS Roll in hot rolling simulator as rolling condition, rolling speed, draft, hot oil concentration. To reduce roll force and prevent scale defects. We get some merit rolling force, rolling torque, roll wear reduction, roll and strip surface roughness and hot rolling critical oil concentration 0.4%. Finally we are going to investigate the effect of hot rolling oil of on rolling with HSS Roll.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.977-982
• /
• 2011

보강롤 구동 4 단 냉간압연기에서 작업롤과 보강롤 사이의 접촉력으로 인해 발생된 작업롤의 수평력을 고찰하였다. 본 수평력은 작업롤을 수평방향으로 휘게하고 롤갭 형상을 그 만큼 변화시킨다. 본 논문에서는 압연을 정상상태라고 가정하여 작업롤의 수평력을 예측할 수 있는 수식모델을 제시하였다. 해석에 사용된 소재는 고-실리콘(약 3%) 강판이었다. 수평력의 비-정상거동을 고찰하기 위해서 삼차원 유한요소모델을 채용하였다. 두 가지 모델을 이용하여 작업롤의 수평력은 보강롤의 중심으로부터 작업롤의 중심이 벗어난 길이에 따라 변한다는 결과를 얻었다. 그리고 작업롤의 수평력을 최소화 시킬 수 있는 작업롤의 최적 중심이탈 길이를 도출하였다.

• 소성∙가공
• /
• 제25권6호
• /
• pp.390-395
• /
• 2016

GDI fuel rail is component of GDI system which directly fuel with high pressure in the engine combustion chamber. And it is required to high strength and dimensional accuracy. Multi roll-die drawing process consists of the idle roll-die and drawing die in tandem. In the course of drawing with roll-die, deformation takes place between the idle roller pair or pairs. The friction force decreases with the idle roll-die, enabling the reductions to be risen in one step. In this study, the caliber of 4-roll was designed into pass schedule that made the draw force at the exit of the drawing die be equal. In order to compensate for over-filling area, the roll caliber was modified using the result of FE-analysis. The results of FE-analysis and experiment show that the proposed design method can be used to effectively design the multi roll-die process, leading to an accurate shape and correct dimensions of the final within an allowable tolerance of ${\pm}0.08mm$. Furthermore, the productivity was evaluated by comparing with multi roll-die drawing process and conventional multi shape drawing process. The result was confirmed that it has an efficiency of about 2 times than conventional process in terms of time.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.327-333
• /
• 2003

Most of shape defects in steel strip are originated from the structure of rolling mill itself. For instance, strip crown occurs when the work roll is deformed by the bending moment induced on roll chocks. To get rids of the shape defects, it is necessary to increase the stiffness of rolling mill. The structure change of back-up roll is one of alternative ways to increase the mill stiffness without facility revamping from 4 high mill to 6 high mill. In this research work, the new back-up roll was developed and can be used in any type of 4 high mill to reduce the strip shape defects. The developed back-up roll consists of sleeve, arbor and phase angle adjusting system for arbor. The circumference of arbor is specially machined to adapt the strip width change during rolling. The experimental cold rolling test was done to prove the effectiveness of newly developed back-up roll. The experimental rolling results show that the new back-up roll has more powerful performance in reducing the shape defects than conventional back-up roll. It was also found that the new back-up roll has higher stability for shape control. In addition to, the only sleeve surface needs to be reground and changed in most cases, so that the maintenance cost can be greatly reduced.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.208-216
• /
• 1999

Nowadays coustomer's needs for high surface quality steel sheet has greatly increased, so it is necessary to pay more attention to the roll grinding, texturing and handling. POSCO can acquire high surface quality roll and high productivity through World-first fully automated Roll Shop system which had been constructed '94.10.1∼'97.8.28 at Kwangyang Works. Roll Shop Automation System consists of Level-I, II, III control system and 23 automated machines. After the completion of the construction, the system started smoothy and keeps its operation with high productivity as expected. The installation of this system gave an epoch-making man power saving. This paper introduce its main facilities and operation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.53.4-53
• /
• 2001

This paper described about the system which can be inspect work roll surface for deciding a milling schedule and roll changing at hot strip mill in POSCO. Developed system consists of CCD camera, Xenon lamp with fiber bundle and mechanical control part. The water probe build up water pole between head of probe and roll surface to acquisite a good image from a work roll surface under the bad environment with steam, cooling water and high temperature. This system is possible to monitor a work roll surface of about 12${\times}$9mm. We have shown the validation of the developed system which can monitor the evolution of degradation on work roll surface.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.247-256
• /
• 1999

This paper describes the results of analysis, syntheses and Roll Stability of various Di-urea greases. Di-urea greases were synthesized by reaction of 4,4'-Methylenebis(phenyl isocyanate) and various amines, such as cyclohexylamine, octylamine, stearylamine and p-toluidine with base oil at 80-180 $^{\circ}C$. The synthesized di-urea greases were analyzed by FT-R spectroscopy. The Roll Stability of synthesized di-urea greases was evaluated.