• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.3
• /
• pp.158-163
• /
• 1990

This experiment was to study the effect of pure mineral nitrogen fertilizing on seasonal distribution of dry matter yield and the advisable mineral nitrogen amounts on grassland. The results were as follows: 1. With longer regrowth periods the absolute dry matter yields and the nitrogen-efficiences due to nitrogen fertilizing increased substantially, whereas the quality declined at the relatively lesser cutting frequencies. 2. The first cut at 3-cut regimes, the first and fourth cut at 4-cut regimes, and the second and last cut at 5-and 6-cut regimes showed the highest nitrogen-efficiency, respectively. 3. By the sigmaformed process of production curve the most efficient mineral N-dressing rate per ha and cut was calculated: 42-56kg N on the 3-cut areas, 39-55kg N on the 4-cut areas, 38-47kg N on the 5-cut areas and 35-48kg N/ha/cut on the &cut areas. 4. In dependence on site and kind of calculation the economical borders were reached with the following dressings of mineral N/ha/cut: 90-100kg on the 3-cut areas, 70-100kg on the 4-cut areas and 50- 90kg on the 5-and 6-cut areas.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.116-120
• /
• 2004

In this paper, we proposed a method to shift the resonant frequency by applying the electric field to microstrip patch antenna using piezoelectric substrates. We fabricated microstrip patch antenna using Y-cut LiNbO3, Quartz and FR-4 substrates. We designed and simulated the microstrip antennas by Ensemble V 7.0 of the simulation too1. We observed the resonant frequency by DC applied electric field in a microstrip patch antenna. When the electric field was 300 V/mm, the resonant frequency agile of Y-cut LiNbO3 microstrip patch antennas were 29 MHz. When the electric field was 400 V/mm, the frequency agile of X-cut, Y-cut and Z-cut quartz microstrip patch antennas were 55.2 MHz, 34.2 MHz and 28.0 MHz, respectively. However, when the electric field was 400 V/mm, the resonant frequency of FR-4 microstrip patch antenna does not changed. It was shown that the resonant frequency agile of Y-cut and Z-cut quartz microstrip patch antennas are due to piezoelectric phenomenon not to be permittivity.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.4 no.2
• /
• pp.116-122
• /
• 1992

The purpose of this paper is to determine the cut off flowrate regions of the overflow valve in using L.P gas vassels. The experimental methods were employed to measure the cut off flowrate in the state of constant pressure by using the $N_2$ gas. 1) To determine the optimum cut off flowrate regions, Hose length are required 0.5 meters. 2) Cut off fowrate regions about the each pressure can be suggested as follows. A) Cut off flowrate rigions are $2.0-4.0m^3/hr$ at the pressure of the $1Kg_f/cm^2$. B) Cut off flowrate rigions are$7.0-10.0m^3/hr$ at the pressure of the $10Kg_f/cm^2$.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.4
• /
• pp.287-300
• /
• 2002

Composition Presplitting Angle Cut (COPA-Cut) is a newly developed blasting method for tunnel excavation. Contrary to existing methods, COPA-Cut first creates presplitting by tension crack in cut. In this study, field tests measuring the advance efficiency, noise and ground vibration were performed in order to verify the presplitting effect. To compare the economy and workability, tests were simultaneously performed by COPA-Cut and existing method on the same condition. Results show that COPA-Cut increased advance efficiency and decreased noise and ground vibration. Also, it was confirmed that COPA-Cut is superior to existing method in terms of economy, workability and quality control.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5455-5459
• /
• 2013

Background: The risk of malignancy index (RMI) for the evaluation of adnexal masses is a sensitive tool in certain populations. The best cut off value for RMI 1, 2 and 3 is 200. The cut off value of RMI-4 to differentiate benign from malignant lesions is 450. Our aim was to evaluate the efficiency of four different malignancy indexes (RMI1-4) in a homogeneous population. Materials and Methods: We evaluated a total of 153 non-pregnant women with adnexal masses who did not have a history of malignancy and who were above 18 years of age. Results: A cut-off value of 250 for RMI-1 provided 95.9% inter-observer agreement, yielding 95.9% specificity, 93.5% negative predictive value, 75.0% sensitivity and 82.8% positive predictive value. A cut-off value of 250 for RMI-1 showed high performance in preoperative diagnosis of invasive malignant lesions than cut-off value of 200 in our population. A cut-off value of 350 for RMI-2 provided 94.5% inter-observed agreement, yielding 94.2% specificity, 93.4% negative predictive value, 75.0% sensitivity and 77.4% positive predictive value. RMI-2 showed the higher performance when the cut-off value was set at 350 in our population. A cut-off value of 250 provided 95.2% inter-observer agreement, yielding 95.0% specificity, 93.2% negative predictive value, 75.0% sensitivity, and 88.0% positive predictive value. RMI-3 showed the highest performance to diagnose malignant adnexal masses when the cut-off value was set at 250. In our study, RMI-4 showed similar statistical performance when the cut-off value was set at 400 [(Kappa: 0.684/p=0.000), yielding 93.8% inter-observer agreement, 93.4% specificity, 93.4% negative predictive value, 75.0% sensitivity, and 75.0% negative predictive value]. Conclusions: We showed successful utilization of RMIs in preoperative differentiation of benign from malignant masses. Many studies conducted in Asian and Pacific countries have reported different cut-off values as was the case in our study. We think that it is difficult to determine universally accepted cut-off values for RMIs for common use around the globe.

• The KIPS Transactions:PartC
• /
• v.12C no.4 s.100
• /
• pp.609-616
• /
• 2005

Signature-based Intrusion Detection has many false positive and many difficulties to detect new and changed attacks. Alpha-cut is introduced which reduces false positive with a combination of signature-based IDS and machine learning-based IDS in prior paper [1]. This research is a study of a succession of Alpha-cut, and we introduce Beta-rick in which attacks can be detected but cannot be detected in single signature-based detection. Alpha-cut is a way of increasing detection accuracy for the signature based IDS, Beta-pick is a way which decreases the case of treating attack as normality. For Alpha-cut and Beta-pick we use XIBL as a learning algorithm and also show the difference of result of Sd.5. To describe the value of proposed method we apply Alpha-cut and Beta-pick to signature-based IDS and show the decrease of false alarms.

• Journal of the Korean Society of Tobacco Science
• /
• v.27 no.2
• /
• pp.201-206
• /
• 2005

In this work, we studied the effects of the moisture contents of cut tobacco on loose end of cigarettes. The loose end of the cigarette groups decreased with the increase of moisture contents of the cut tobacco and especially the loose end of A and C groups decreased to $31\%\;and\;52\%$ with the increase of $1\%$ moisture contents. $A-13.5\%\;and\;B-14.0\%\;and\; C-14.0\%$ moisture samples showed the increase of the weight ratio of cut tobacco over 1.4mm cut length but the decrease under 1.4mm cut length. We concluded that the main reasons were regarded to reduction of small fragment tobaccos caused by increase of moisture contents and exception of air-suction transport of tobaccos to cigarette making machine. In spite of the moisture increase of cut tobaccos under fixed EPD(encapsulated pressure drop), the hardness of Band C sample groups were maintained constantly except A group. This result means that under fixed EPD, the weight of cut tobacco in cigarette rods increases to compensate the reduction of pressure drop by moisture increase of cut tobaccos.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.3
• /
• pp.175-185
• /
• 1995

This experiment was carried out to investigate the optimum rates of animal excreta(cattle slurry-N) for the highest dry matter production and improve the nutritive values of reed canarygrass with different cutting frequency. The results are summarized as follows; The highest relative dry matter yields for annual dry matter yield were 42.2% and 45.2% at 3rd cut in 3 and 4 cuttings, and 34.7% at 4th cut in 5 cuttings, respectively. The annual dry matter yields of non slurry-N application plot showed were from 6.8 tons to 8.0 tons/ha in all cutting frequencies. The highest annual dry matter yield obtained was in 3 cuttings. The annual dry matter yield increased with an increase of applied rates of slurry-N in all cutting frequencies. Annual dry matter yield was produced by 3.3 tons/ha at rates of 90 kg N/ha/cut in 3 cuttings, and more 1.7 tonsha and 2.4 tons/ha at rates of 30 kg N/ha/cut in 4 and 5 cuttings than that of non slurry-N application plots. The contents of crude protein were 12.01% and 15.0% at rates of 90 kg N/ha/cut in 3 and 4 cuttings, and 16.59% at rates of 120 kg N/ha/cut in 5 cuttings, respectively. On the contrary, the content of acid detergent fibre(ADF) showed the lowest values at same rates of slurry-N application in each cutting. J. The average content of crude protein was significantly increased with cutting frequencies, and they were 11.43%, 13.53% and 15.53% in 3, 4 and 5 cuttings, respectively. The average contents of acid detergent fibre(ADF) were 40.27%, 40.53% and 37.06% in 3, 4 and 5 cuttings. The values of 5 cuttings were significantly lower than other cutting frequencies, but the values of acid detergent fibre(ADF) was not significantly different between 3 and 4 cuttings. 6. The efficiency of dry matter production to slurry-N application rates showed the highest values of 18.9 kg and 15.7 kg DM/kg N at rates of 30 kg N/ha/cut in 3 and 5 cuttings, and 16.3 kg DM/kg/ N at rates of 90 kg N/ ha/cut in 4 cuttings. The efficiency of total nitrogen yield to slurry-N application rates were the highest values of 0.51 kg and 0.43 kg W k g N at rates of 30 kg N/ha/cut in 4 and 5 cuttings, and 0.52 kg TN/kg N at rates of 90 kg N/ha/cut in 3 cuttings, respectively. 7. The ranges of economic slurry-N rates were estimated as the 107.2-151.0 kglha, 359.1-375.7 kgha and 160.3-236.9 kg/ha in 3, 4 and 5 cuttings, and marginal dry matter yields were 9.6-10.0 tons/ha, 12.4-12.6 tons/ha and 9.0-9.7 tons/ha in 3, 4 and 5 cuttings, respectively. 8. The limiting sluny-N application rates to maintain the highest dry matter yields were estimated to be 420.0 kg/ ha, 440.6 kg/ha and 666.3 kg/ha in 3, 4 and 5 cuttings.

• Journal of the Korean Magnetics Society
• /
• v.6 no.5
• /
• pp.329-333
• /
• 1996

We have studied the magnetoresistance and the magnetic anisotropy of Cu/(NiFe/Ni/NiFe) metallic multi layers grown on Si(100), Si(111), $4^{\circ}\;tilt-cut\;Si(111)$ or glass substrate. When the multilayer was grown on $4^{\circ}\;tilt-cut\;Si(111)$ with $50\;{\AA}$ of Cu underlayer, an in-plane uniaxial anisotropy was observed. On the other substrates such as Si(100), Si(111) or glass with Cu underlayer, however, no appreciable anisotropy was shown. The multilayer grown with NiFe or Ni underlayer or without underlayer did not show any arnsotropy even on $4^{\circ}\;tilt-cut\;Si(111)$. When $10\;{\AA}$ of NiFe was deposited prior to the Cu underlayer, the anisotropy in Cu/(NiFe/Ni/NiFe) multilayer disappeared.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.4 no.1
• /
• pp.33-42
• /
• 1996

In this study, the adequate cutting frequency and level of cattle slurry nitrogen application were investigated for the production of Reed canarygrass. Higher relative dry matter yields were recorded in 2nd cut in 3 cutting frequency, 3rd cut in 4 cutting frequency and 4th cut in 5 cutting frequency respectively. With no fertilization, mean dry matter yields per year were 6.4~7.5 tons/ha and the highest yield appeared in 3 cutting frequency. The increased application of cattle slurry nitrogen resulted in the increased dry matter yield. Significantly higher dry matter yields than that of no fertilization were recorded in fertilization of 180 kg cattle slurry-N per year in 3 cutting frequency, 120 kg in 4 cutting frequency and 300 kg in 5 cutting frequency respectively. Efficiency of dry matter production with cattle slurry nitrogen application (kg DM/kg N) was higher in 120 kg N, 30 kg N and 90 kg N/ha/cut in 3, 4 and 5 cutting frequency respectively. In each cutting frequency, the higher efficiency of dry matter production appeared in 1st cut in 3 cutting frequency, and 2nd cut in 4 and 5 cutting frequency respectively. Economic slurry N level (kg/ha) was 462.7~525.3 kg/ha in 3 cutting frequency, and 353.1~423.2 kg/ha and 380.1~424.4 kg/ha in 4 and 5 cutting frequency respectively.