TerraSAR-X를 이용한 조간대 관측 (Investigation of Intertidal Zone using TerraSAR-X)
-
- 대한원격탐사학회지
- /
- 제25권4호
- /
- pp.383-389
- /
- 2009
TerraSAR-X자료를 이용하여 고해상 X-밴드 SAR시스템을 이용한 조간대 갯벌 관측에의 적용 가능성을 시험하였다. 연구대상지 역은 강화도 남단과 영종도를 잇는 조간대이며, 단일편파자료와 이중편파자료를 이용하였다. 연구내용은 다음과 같은 세 가지로 분류된다. 첫째, X-밴드 영상에서의 연안의 레이더 반사도 특성 연구 및 waterline 추출 정밀도를 평가하였다. 연안지역의 waterline은 HH 편광자료의 레이더 반사도 특성을 통하여 추출하였을 때 가장 신뢰도가 높았으며, TerraSAR-X 시스템의 짧은 파장과 높은 궤도정밀도로 인하여 정밀한 지리좌표로의 변환이 가능하였다. 연구지역의 조간대 지형 경사도는 평균적으로 수평방향으로 60 m당 20 cm의 고도변화를 가지므로, TerraSAR-X HH 편광자료를 이용한 waterline 추출은 정밀한 조간대 DEM 추출로 응용될 수 있다. 둘째, 이중편파자료의 편파특성을 이용한 조간대 영생식물의 산란특성을 관측하였다. 조간대 수륙경계부에서 잘 관측되는 칠면초와 같은 염생식물은 해수면변화에 따른 조간대의 육지화 모니터링에 좋은 표적이 된다. TerraSAR-X 이중편파자료의 산란특성을 이용한 염생식물 관측결과는 2007년에 현장에서 취득된 실측자료와 비교하여 3 dB 이내의 정밀도로 일치하였다. 셋째, 단일편파자료의 레이더 간섭기법을 이용한 조간대 DEM작성을 시도하였다. 조간대 내에서 육지화가 진행된 지역은 표면에 염생식물이 발달하였음에도 불구하고 높은 간섭긴밀도를 나타내었다. 레이더 간섭기법을 통한 DEM의 제작은 일반적인 조간대에서는 적용이 제한적이며, TanDEM-X의 적용이 필요하다.
용암류 대지를 이루고 있는 철원평야에 분포하고 있으며 Alfisols로 분류되고 있는 동송통을 선정하여 우리나라의 공식적인 토양 분류 체계인 Soil Taxonomy에 따라서 분류하고, 그 생성을 구명하기 위하여 동송통 대표단면의 형태적 특성을 조사하고, Soil Taxonomy의 표준 분석방법인 Soil Survey Laboratory Methods Manual에 따라서 토양을 분석하여 Laboratory data sheets를 작성하였다. 동송통은 0~22 cm 깊이에 ochric 감식표층을 보유하고, 22~120 cm 이상의 깊이까지 점토집적층인 argillic층을 보유하고 있으며, andic 토양 특성을 보유하지 않고 있다. 또한 argillic층의 상부경계에서 125 cm 아래 깊이인 147 cm 깊이에서의 염기포화도 (양이온합)가 15.7%로 35% 미만이다. 따라서 동송통은 Alfisols, 또는 Andisols이 아니라 Ultisols로 분류되어야 한다. 동송통은 토양표면에서 50 cm 이내 깊이의 1개 이상의 층위에서 aquic 조건을 보유하고, 25~40 cm 깊이의 모든 층위에서 산화환원성인을 보유하며, argillic층의 상부 12.5 cm 깊이에서 채도 2 이하의 산화환원탈리를 50% 이상 보유하고 있으므로 Aquults로 분류할 수 있다. 우리나라 토양으로는 처음으로 Aquults로 분류할 수 있다. 토양표면에서 50 cm 깊이까지만 물로 포화되고, 그 아래 깊이에서는 포화되지 않는 episaturation을 보유하고 있으므로 대군은 Epiaquults로 분류할 수 있다. Bt1층 (50~92 cm)에서의 토색이 적갈색 (5YR 5/4)으로 높은 채도를 보유하므로 Aeric Epiaquults로 분류할 수 있다. 토성속 제어부위에서의 토성속이 식질이고, 토양온도상이 mesic 온도상이기 때문에 동송통은 Fine, mesic family of Typic Epiaqualfs가 아니라 Fine, mesic family of Aeric Epiaquults로 재분류되어야 한다. 동송통은 후기 홍적세에 열극 분출에 의하여 형성된 철원 지방의 용암류대지에 분포하고 있다. 화산쇄설물이 아니라 현무암을 모재로 하고 있으며, 기후조건 또한 비교적 건조하기 때문에 Andisols이 아닌 토양으로 생성 발달되었다고 생각된다. 동송통은 안정한 지형인 현무암 용암류 대지에 분포하고 있으므로 토양이 거의 침식되지 않고 충적물이 별로 퇴적되지 않기 때문에 오랫동안 토양수의 하향이동에 따른 점토집적작용과 염기용탈작용을 받았다. 그 결과 점토집적층인 argillic층을 보유하는 토양으로 생성 발달되었다. 그러나 동송통의 경우 점토 함량이 높기 때문에 물의 하향 이동이 제한되어 상부 층위들만 물로 포화되어 있고, 하부 층위는 불포화 상태를 이루고 있는 episaturation 상태를 이루고 있다. 따라서 Ca, Mg, K, Na 등의 염기의 하향 이동이 원활하게 이루어지지 않기 때문에 기준 깊이에서 염기포화도 (양이온 합)가 35% 미만인 Ultisols로 생성 발달한 것이라고 생각된다.
토양의 공극 크기별 분포는 토양중 수분의 함량과 수분퍼텐셜의 관계를 나타내는 토양수분특성 자료로부터 계산된다. 그러나 기존의 토양수분특성 측정방법들은 교란된 토양을 이용하거나 코어시료를 채취한다 하여도 동역학적으로 변화하는 현장 토양 공극분포를 반영하는 데는 많은 어려움이 있었다. 또한 이러한 토양수분특성 자료를 얻기 위해서는 많은 시간과 노력이 요구되어 왔다. 따라서 본 연구에서는 교란되지 않은 현장 토양에서 측정한 불포화 수리전도도 자료로부터 토양의 공극 크기별 분포 곡선을 추정하는 이론적 체계를 제시하고자 하였다. 이를 위해 Brooks-Corey와 van Genuchten의 수리학적 모델을 이용하여 토양의 불포화 수리전도도 자료로부터 공극의 크기별 분포를 추정하는 이론적 모델을 전개하였으며, 이러한 이론적 모델에 근거하여 Brooks-Corey와 van Genuchten의 soil parameter들의 변화에 따른 불포화수리전도도와 공극 크기별 분포곡선의 모사하였다. 공극크기별 분포곡선의 모사는 토성별 불포화수리전도도 곡선의 scaling factor 역할을 하는
Excessive concentration of stress which is occurred in occlusion around the implant in case of the implant supported fixed partial denture has been known to be the main cause of the crestal bone destruction. Therefore, it is essential to evaluate the stress analysis on supporting tissue to get higher success rates of implant. The purpose of this study was to evaluate the effects of stress distribution and deformation in 3 different types of three-unit fixed partial denture sup-ported by two implants, using a three dimensional finite element analysis in a three dimensional model of a whole mandible. A mechanical model of an edentulous mandible was generated from 3D scan, assuming two implants were placed in the left premolars area. According to the position of pontic, the experiments groups were divided into three types. Type I had a pontic in the middle position between two implants, type II in the anterior posi-tion, and type III in the posterior position. A 100-N axial load was applied to sites such as the central fossa of anterior and posterior implant abutment, central fossa of pontic, the connector of pontic or the connector between two implants, the mandibular boundary conditions were modeled considering the real geometry of its four-masticatory muscular supporting system. The results obtained from this study were as follows; 1. The mandible deformed in a way that the condyles converged medially in all types under muscular actions. In comparison with types, the deformations in the type II and type III were greater by 2-2.5 times than in the type I regardless of the loading location. 2. The values of von Mises stresses in cortical and cancellous bone were relatively stable in all types, but slightly increased as the loading position was changed more posteriorly. 3. In comparison with type I, the values of von Mises stress in the implant increased by 73% in Type II and by 77% in Type III when the load was applied anterior and posterior respectively, but when the load was applied to the middle, the values were similar in all types. 4. When the load was applied to the centric fossa of pontic, the values of von Mises stress were nearly
본 연구에서는 충주댐을 대상으로 유역모델인 SWAT과 저수지모델인 CE-QUAL-W2를 연계 적용하여 기후변화에 따라 저수지로 유입되는 하천의 유량 및 탁수발생량을 모의하고, 저수지내의 탁수변화 및 부영양화 영향평가를 통한 저수지 수환경 변화를 전망하였다. 먼저 SWAT을 적용하여 강우시 저수지 유입하천의 유량 및 수질을 모의하여 모델의 재현성을 검토하였으며, 모형의 보정(2000~2005)과 검증(2006~2010) 결과 모델 예측값과 실측값이 적절하게 일치하는 것으로 나타났다. SWAT의 결과를 CE-QUAL-W2의 하천유량 및 유입수 수질경계조건 입력자료로 활용하고, 보정(2010년)과 검증(2008년)을 통하여 저수지 내 시간에 따른 물수지, 수온 변화, 부유물질(SS), T-N, T-P 및 부영양화(Chl-a) 양상 등을 분석하고 모델의 재현성을 검토하였다. 이후 기후변화 시나리오 적용에 따른 저수지 내수환경변화를 모의하기 위한 기후변화자료로 IPCC AR4 GCM(ECHO-G)을 고해상도지역 기후 시나리오로 개선시킨 RCM(MM5)의 A1B 시나리오를 다시 태풍사상을 고려한 인공신경망 기법에 의해 상세화하여 이용하였다. 기후변화 시나리오에 따른 기온증가의 영향으로 미래로 갈수록 상층수온은 증가하는 반면 심층수온은 감소하는 경향을 보였다. SS 최고유입농도는 평수년에 비해 풍수년에 17%, 갈수년에 0.2% 가량 증가하는 것으로 나타났다. 호소내 SS 10mg/L 이상 점유일수는 평수년에 비해 풍수년이 6일, 갈수년이 17일 증가하였고, 점유율 역시 풍수년에 24%, 갈수년에 26%가량 증가하는 것으로 분석되었다. 미래로 갈수록 기후변화가 충주댐 탁수장기화에 영향을 미치는 것으로 분석되었다. Chl-a의 최고농도는 평수년에 비해 풍수년에 19%, 갈수년에 3% 가량 조류의 농도가 증가되는 것으로 나타나 조류의 영향이 커지는 것을 알 수 있었다.
This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70