• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.77-77
• /
• 2018

Panel level packaging (PLP) 공정은 차세대 반도체 패키징 기술로써 wafer level packaging 대비 net die 면적이 넓어 생산 단가 절감에 유리하다. PLP 공정에 적용되는 구리 재배선 층 (RDL, redistribution layer)은 두께 불균일도에 의해 전기 저항의 유동이 민감하게 변화하기 때문에 RDL의 두께를 균일하게 형성하는 것은 신뢰성 측면에서 매우 중요하다. 구리 RDL은 주로 도금 공정을 통해 형성되며, 균일한 도금막 형성을 위해 도금조에 평탄제를 첨가하여 도금 속도를 균일하게 한다. 도금막에 대한 흡착은 주로 평탄제의 imine 작용기에 포함된 질소 원자가 관여하며, imine 작용기의 4차화에 의한 평탄제의 흡착 정도를 제어하여 평탄제 성능을 개선할 수 있다. 본 연구에서는 도금 평탄제에 포함된 imine 작용기의 질소 원자를 4차화하여 구리 RDL의 도금 두께 불균일도를 제어하고자 하였다. 유기첨가제와 4차화 반응을 위해 알킬화제로써 dimethyl sulfate의 비율을 조절하여 각각 0, 50, 100 %로 4차화 반응을 진행하였다. 평탄제의 4차화 여부를 확인하기 위해 gel permeation chromatography (GPC) 분석을 실시하였다. 도금은 20 ~ 200 um의 다양한 배선 폭을 갖는 구리 RDL 미세패턴에서 진행하였으며, 4차화 평탄제를 첨가하여 광학 현미경과 공초점 레이저 현미경을 통해 도금막 표면과 두께에 대한 분석을 실시하였다. GPC 분석을 통해 4차화 반응 후 알킬화제에 의해 나타나는 GPC peak이 감소한 것을 확인하였다. 광학 현미경 및 공초점 레이저 현미경 분석 결과, 4차화된 질소 원자가 존재하지 않는 평탄제의 경우, 도금 시 도금막의 두께가 불균일하였으며 단면 분석 시 dome 형태가 관찰되었다. 또한 100 % 4차화를 실시한 평탄제를 첨가하여 도금 한 경우 마찬가지로 두께가 불균일한 dish 형태의 도금막이 형성되었다. 반면, 50 % 4차화를 적용한 평탄제를 첨가한 경우, 도금막 단면의 형태는 평평한 모습을 보였으며 매우 양호한 균일도를 가지는 것으로 확인되었다. 이로 인해 imine 작용기를 포함한 평탄제의 4차화 반응을 통해 구리 RDL의 단면 형상 및 불균일도가 제어되는 것을 확인하였으며, 4차화된 imine 작용기의 비율을 조절하여 높은 균일도를 갖는 구리 RDL 도금이 가능한 것으로 판단되었다.

• Journal of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.280-286
• /
• 1987

The effect of substituent inleaving group on the rates of reactions of phenacyl substituted-benzenesulfonates with pyridine was determined conductometrically in acetonitrile and in methanol at 35, 45, and $55^{\circ}C$, respectively. The reaction rate became faster in proportion to electron-attracting ability of substituent, which indicates that the substituent in leaving group can directly control reaction rate. It was shown that the specific to the carbonyl carbon as the rate-determining step.

• Journal of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.307-309
• /
• 1990

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.5
• /
• pp.458-465
• /
• 2018

This study reports the fabrication of anion exchange membranes (AEMs) containing two kinds of functional groups: i) trimethylphosphite (TMP) and ii) trimethylamine (TMA). We carried out the synthesis of polymers to enhance thermal stability and ion conductivity. The alternative polymer was prepared using 2,2-bis(4-hydroxy-3-methylphenyl)propane and decafluorobiphenyl. The membrane was fabricated by solution casting method. The thermal stability of membranes was examined by TGA. The physiochemical properties of membranes were also investigated in terms of water uptake, swelling ratio, ion exchange capacity, and ion conductivity. The hydroxide ion conductivity of the membranes reached about 20.2 mS/cm for quaternary ammonium poly(arylene ether) (QA-PAE) containing TMA moiety and 5.1 mS/cm for quaternary phosphonium PAE (QP-PAE) containing TMP moiety at $90^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.243-247
• /
• 1979

Kinetics of the reaction of phenethyltosylate with substituted pyridines at 50, 60 and 70$^{\circ}C$ in acetonitrile were investigated by an electric conductivity method. The effects of substituents on the reaction of phenethyltosylate with pyridines were discussed. The rates of reaction were increased with electron donating power of substituents of pyridines. The isokinetic relationship was shown $E_{\alpha}$ and ${\Delta}S^{\neq}$, it's temperature was 240$^{\circ}$K. Bronsted plots were excellent linear except for 4-amino pyridine given by the following equation, logk=O. 22pKa-3.71 (r=O. 986). According to a plot of log k against Hammett substituent constants, the Iinearity was good except for bamino pyridine too, log k= -1.330${\sigma}$+0.08 (r= -0.987). In both cases, deviation of 4-amino pyridine from linearity was considered to solvent effect, resonance effect and ${\sigma}$ value itself. From all the above results, this reaction was found typical $S_N2$ reaction which the rates of reaction was determined by C…N bond formation at transition state.

• Journal of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.110-118
• /
• 1981

Kinetics and mechanism for the reaction of substituted phenacyl bromides with substituted pyridines have been determined at 25, 35 and $45^{\circ}C$ in methanol and dimethylformamide by the conductivity method. The rate constants for the reaction of various pyridines with phenacyl bromide shown that electron-donating substituents in the pyridine increase the rate, while electron-attracting one decrease in both solvents. The effect of substituents in substrate, the rate being increased by electron-attracting substituents. This is as expected for nucleophilic attack of amines on the carbon atom. Isokinetic and $Br{\psi}nsted$ linear relationship were shown in the reaction of phenacyl bromide with pyridines in both solvent in which isokinetic temperature were obtained 614, $202^{\circ}K$ and ${\beta}$ values were 0.29, 0.36 in methanol and dimethylformamide respectively. In the case of the reaction of substituted phenacyl bromide with pyridines, isokinetic temperature decreases with increasing electron-attracting ability of the substituents in the phenacyl bromide, while the ${\beta}$ values were reverse. From the above results, it can be inferred that N…C bond formation decreases progressively from p-chloro- to p-methoxyphenacyl bromide and the bond formation predominates in DMF than methanol. The ${\rho}$ values of Hammett equation of the reaction of phenacyl bromide with substituted pyridines are negative in both solvent, but its value was larger negative in DMF than methanol and the ${\rho}$ value of that of substitutted substrates with pyridine was 0.3, the low value is ascribed to direct $S_N2$ attack of the nitrogen atom in pyridine ring at the methylene carbon.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.237-245
• /
• 1997

A DEAE-chitin was prepared with DEAE HCl in an aqueous alkali-chitin solution. The resulting DEAE-chitin exhibited a highly improved affinity to water and organic solvents, It was N-deacetylated by heating in aqueous 10% sodium hydroxide containing sodium borohydride for 9h at $80^{\circ}C$ to produce DEAE-chitosan. These conditions were milder than those for the N-deacetylation of chitin. In order to increase its cationic character, the DEAE-chitin was treated with ethyl halide to give TEAE-chitin. The structural changes in the chitin derivatives were confirmed by using both FT-IR and $^1H$ NMR, and their flocculating behavior, in kaoline suspension showed the optimum property at a weak alkaline pH and 8 ppm concentration of resin conditions.

• Journal of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.333-339
• /
• 1982

Substituent effects of substrate and leaving group for the reaction of substituted ${\beta}$-phenylethyl arenesulfonates with pyridine were determined conductometrically in acetonitrile at 50∼70$^{\circ}$C. The substituent effect in substrate is not so significant than expected, but still the electron donating substituent shows the slight acceleration to give a small negative ${\rho}$ value and Hammett plots show slight curvature on the acting substituents, even though it is not so remarkable than that of benzyl system. These results represent a little bit the favorable bond breaking at the transition state by the electron donating substituents. The effects of leaving group in the arenesulfonates in which the rate constants are decreased by electron donating substituents, while electron withdrawing groups presented the reverse effects. Hammett ${\rho}$ value is significantly smaller than that of p-nitrobenzyl arenesulfonates and thus, the mechanism should be closer to tight $S_N2$ one. Especially 2,5-dichlorobenzenesulfonate was more accelerated than expected at the additivity of substituents. This facts showed that dichlorobenzenesulfonate anion is more stabilized by the great electron withdrawing substituents at transition state.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.1
• /
• pp.142-151
• /
• 2017

Cationic surfactants have a bactericidal effect and the study for effective development of them became important parts in the industry. There have been increasing researches that focus on the development of products having not only outstanding features but also safety and biodegradability. In this work, novel ester-type cationic surfactants were obtained via Michael addition reaction. Intermediates were quantitatively prepared by the Michael addition reaction between alkyl acrylate and amine compounds under mild conditions without solvent and catalyst. The intermediates were quaternized with dimethyl sulfate. HQ21 with two hydrophobic groups and a hydrophilic group and HQ22 with two hydrophobic groups and two hydrophilic groups were obtained. The structures of the products were characterized by 1H-NMR, HR-MS and FT-IR and biodegradability of the products were tested.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.556-562
• /
• 2006

Quarternized poly(4-vinyl pyridine)s have been prepared by the reaction of poly (4-vinyl pyridine)s (Mw=50 kg/mol and 200 kg/mol) and alkylating agents varying the carbon numbers of the alkyl groups (m):dimethyl sulfate (m=1) as well as bromoalkane (m= 5, 8, 12, 16, and 22) was used as an alkylating agent. The degree of alkylation was determined by using an elemental analysis and NMR spectroscopy. As a result, polyelectrolytes were obtained by the almost full alkylation of poly (4-vinyl pyridine)s. The critical aggregation concentration (CAC) was determined by measuring the change of turbidity occurred by addition of sodium dodecyl sulfate (SDS) into aqueous solution of quarternized poly-(4-vinyl pyridine)s, and the dependence of molecular weight of polymer, the length of N-alkyl group and concentration of NaCl upon CAC was investigated. As a result, as the molecular weight or the length of alkyl group was increased, less amount of SDS Gould induce the aggregation.