• 제목/요약/키워드: 4급암모늄염

검색결과 24건 처리시간 0.021초

3급 아민염 및 4급 암모늄염의 Tetrathiocyanatocobaltate[II]에 의한 분석화학적 연구 (Studies on the Chemical Analysis of the Tertiary Amine Salt and Quaternary Ammonium Salt by Tetrathiocyanatocobaltate[II])

  • 엄동옥;이윤중
    • 약학회지
    • /
    • 제24권3_4호
    • /
    • pp.159-165
    • /
    • 1980
  • Tetrathiocyanatocobaltate[II] forms complexes with tertiary amine salts or quarternary ammonium salts which were extractable from aqueous solution by organic solvent. In order to study composition of the complex, the colored crystalline complexes produced were evaluated with elemental analysis, infrared and mass spectra. And also a novel spectrophotometric method for the determination of tertiary amine salt or quarternary ammonium salt with tetrathiocyanatocobaltate[II] was established by organic solvent extraction within coefficient of variation of 1.06-1.35%.

  • PDF

혼합용매계에 대한 아민염의 전기전도도에 관한 연구. 메탄올-물 혼합계에 대한 메틸암모늄염의 전도도 (A Study on Conductance Behaviors of Amine Salts in the Binary Solvent Mixtures. Methylammonium Chlorides in Methanol-Water Mixtures at $25^{\circ}C$)

  • 윤상기;김봉규;엄태섭;박종열
    • 대한화학회지
    • /
    • 제20권3호
    • /
    • pp.185-192
    • /
    • 1976
  • 여러가지 조성의 메탄올-물 혼합용매와 물에 대한 몇가지 아민염의 당량전도도 (${\Lambda}$)를 $25^{\circ}C$에서 측정하였다. 즉 0.0${\sim}$0.6 몰분율(m.f.)까지의 메탄올-물 혼합용매와 물에 대하여 염화암모늄과 1급에서 4급 암모늄염에 이르는 4가지 메틸암모늄염화물의 당량전도도를 0.01 ${\sim}$ 0.04 M 농도범위에서 측정하고 Fuoss-Onsager의 반이론식으로서 극한당량전도도(${\Lambda}_0$)를 구하였다. 실험결과는 용매조성 및 염의 종류에 따른 극한당량전도도의 변화에 대하여 논의되었다. 즉 아민염의 종류에 관계없이 공통적인 현상으로 특이한 점은 메탄올의 농도가 커짐에 따라 ${\Lambda}_0$는 줄어드는데 그 줄어드는 크기가 물에 가까울 수록 크고 0.4 m. f.에서 극소값을 보였다. 또한 염의 크기가 커짐에 따라 ${\Lambda}_0$는 줄어들고 동일한 실험조건에서 대응하는 n-아민염에 대하여 측정된 ${\Lambda}_0$값보다 크다는 것을 알았다. 이러한 현상들은 용매와 용질의 구조와 밀접한 관계가 있으며 같은 용매계에서 관측된 분몰랄부피 현상과 극히 닮았다는 사실을 알았다.

  • PDF

2-클로로메틸-5-(2-Phenylthiazol-4-yl)-1,3,4-옥사디아졸의 새로운 4급 암모늄염의 합성과 계면활성도 (Synthesis and Surface Activity of New Quaternary Ammonium Salts Prepared from 2-Chloromethyl-5-(2-Phenylthiazol-4-yl)-1,3,4-Oxadiazole)

  • 배선건;연영흠
    • 공업화학
    • /
    • 제17권3호
    • /
    • pp.286-290
    • /
    • 2006
  • 새로운 4급 염화 암모늄염, {alkyldimethyl-[5-(2-phenylthiazol-4-yl]-1,3,4-oxadiazol-2-ylmethyl]quaternary ammonium chlorides (ADOQACs): 6}을 화합물 5와 몇 가지 N,N-dimethylalkyl amine을 반응시켜 합성하였다. 합성한 화합물들의 구조와 물리적 특성을 조사하였고 계면활성을 측정하였다. 화합물 6의 표면장력($\gamma_{cmc}$)과 최소저해농도(MIC)는 알킬기의 영향을 받은 것으로 나타났으며, 특히 화합물 6c와 6d가 좋은 항균력과 계면활성을 보였다.

4급 암모늄염 촉매에 의한 Glycidyl Methacrylate와 이산화탄소의 부가반응 (Addition Reaction of Glycidyl Methacrylate with Carbon Dioxide Using Quaternary Ammonium Salts as Catalys)

  • 양정규;문정열;정성미;박대원;이진국
    • 공업화학
    • /
    • 제7권6호
    • /
    • pp.1156-1163
    • /
    • 1996
  • 본 연구는 이산화탄소와 glycidyl methacrylate(GMA)의 부가반응에 의한(2-oxo-1,3-dioxolane-4-yl)methacrylate(DOMA)의 합성에 4급 암모늄염 촉매의 특성을 고찰한 것이다. 4급 암모늄염 상이동 촉매의 알킬기의 크기가 크고 짝음이온의 친핵성이 강할수록 촉매활성이 높았다. 폴리에틸렌글리콜이나 NaI, 18-crown-6를 단독으로 사용한 경우에는 반응활성이 전혀 없었으나 NaI와 18-crown-6의 혼합물을 촉매로 사용한 결과 비교적 좋은 DOMA 수율을 얻었다. 또한 극성이 낮은용매를 사용한 경우에는 단량체 형태의 DOMA를 얻을 수 있었고, 극성이 높은 비양성자성 용매를 사용한 결과 DOMA의 고분자를 직접 합성할 수 있었다. 한편 고압 회분반응기에서 이산화탄소의 압력변화를 통한 속도론 적 고찰 결과 반응속도는 GMA와 이산화탄소의 농도에 대하여 각각 1차 반응이었고, 이때 반응속도 상수 k는 0.56L/mol hr이었으며 diglyme 용매에 대한 $80^{\circ}C$에서 $CO_2$의 Henry 상수 H'는 $6.5{\times}10^{-4}mol/L{\cdot}kPa$로 나타났다.

  • PDF

멸치젓 첨가 김치 숙성중 제 2급, 제 3급 아민 및 제 4급 암모늄 화합물의 함량 변화와 N-Nitrosamine의 생성 (Changes of Secondary, Tertiary Amines and Quarternary Amminium Compounds, and Formation of N-Nitrosamine during Fermentation of Kimchi with Anchovy Sauce)

  • 김수현;현재석;오창경;오명철;박제석;강순배
    • 한국식품영양과학회지
    • /
    • 제23권4호
    • /
    • pp.704-710
    • /
    • 1994
  • 멸치젖 첨가 김치 숙성 중 제2급 및 제3급, 제4급 암모늄 호합물의 함량변화 및 N-nitrosamine 생성에 대해 연구한 결과를 요약하면 다음과 같다. 질산염 질소는 발효 숙성 중 대조구와 멸치 첨가구에서 점차적으로 증가하였으나, 아질산염을 검출한계 미만이었다. 제2급 아민은 발효숙성 중 계속적으로 증가하다가 숙성 60일 이후에 급격히 증가하였다. TMA-N는 발효 중 거의 변화가 없는 반면, TMAO-N는 약간 감소하였다. Betaine-N는 숙성 초기에 상당히 증가한 반면 숙성 60일 이후 감소하였다. Cholin-N는 숙성 초기에 감소하다가 중기에는 증가하였으며, 숙성 말기에는 다시 감소하는 현상을 보였다. Creatinine-N는 발효 숙성 중에 변화가 거의 없었다. N-Nitrosamine은 숙성 초기에 수 $\mu\textrm{g}/kg$에서 $45\mu\textrm{g}/kg$까지 검출되었다. 검출되었다.

  • PDF

면섬유에 대한 홍차색소의 염색성 (Dyeing Properties of Cotton with Black Tea Colorants)

  • 서명희;신윤숙
    • 한국의류학회지
    • /
    • 제24권1호
    • /
    • pp.34-42
    • /
    • 2000
  • The colorante from black tea infusion were applied to cotton fabric. Dyeing properties were investigated in terms of dye uptakes at various dyeing conditions and the effect of mordants on color change and colorfastness. Cotton showed low affinity to black tea colorants. Effects of mordants on dye uptake was not significant except Sn. Irrespective of mordant type, color of cotton dyed with black tea colorants was brownish and colorfastness was generally good. In order to improve dye uptake, cotton was cationized by treating with Cationon UK(tertiary ammonium salt) and chitosan. Dye uptake of cotton was remarkably increased by cationizing. Cationon UK was more effective than chitosan.

  • PDF

4급 아민 키토산의 제조 및 항균특성 (Preparation and Antibacterial Properties of Quatenary Amine Chitosan)

  • 조석형;김영준;조재철;모상현
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2011년도 춘계학술논문집 2부
    • /
    • pp.937-940
    • /
    • 2011
  • 물/유기용매의 혼합용액에 키토산을 분산시키고 이 현탁액에 글리시딜 트리알킬 암모늄염, 글리시딜 아릴염 등의 에테르 시약을 상온에서 현탁상태로 반응시켜 4급화 키토산을 제조하는 새로은 방법을 개발하였다. 이 방법으로 합성한 결과 수득율이 90%이상이었으며 후처리과정이 필요없었다. 4급화 키토산의 균에 대한 최소저지농도(MIC)를 조사한 결과 E. coli O157:H7 균주의 MIC는 0.007%-0.01%(70-100ppm)로 추정되었고 V. vulnificus 균주의 MIC는 0.005%(50ppm)정도이고 V.vulnificus 균주의 MIC는 0.007%(70ppm)이었다. 작물에 대한 항균성을 알아보기 위하여 4N-키토산의 항균 활성만이 검정되었는데, 4N-키토산은 고추 역병균인 P. capsici에 대하여 가장 높은 항균 활성을 보여 4,000 ppm에서부터 키토산 무첨가 대조구에 비하여 항균활성을 보였으며 P. capsici보다는 약하지만 잿빛곰팡이병균 B. cinerea에 대하여도 약간의 항균 활성을 보이고 있어, 16,000 ppm에서는 항균서이 뚜렷이 나타났으나 고추 탄저병균인 C. gloeosporioides에 대해서는 16,000 ppm 이라는 높은 농도에서도 항균 활성을 전혀 보이고 있지 않았다.

  • PDF

양이온성 섬유유연제 HEC-2-HP-AC Ether 유도체의 합성에 관한 연구 (A Study on the Synthesis of Cationic Fiber-Softener HEC-2-HP-AC Ether Derivatives)

  • 강익중
    • 공업화학
    • /
    • 제9권4호
    • /
    • pp.603-607
    • /
    • 1998
  • Cellulose를 출발물질로 하여 ethylene oxide와 hydroxyethylcellulose를 합성하였다. Epichlorohydrin과 triakylamine을 치환반응시켜 제4급 암모늄염을 만든후, 산을 첨가하여 3-chloro-2-hydroxypropyltrialkylammonium chloride를 얻었다. Hydroxyethylcellulose와 glycidylalkylammonium chloride 또는 3-chloro-2-hydroxypropyltrialkylammonium chloride를 coupling하여 지금까지 알려져 있지 않은 화합물 hydroxyethylcellulose-2-hydroxypropylammonium chloride ether와 hydroxyethyl-cellulose-2-hydroxypropyltriethylammonium chloride ether를 각각 73.9%, 74.2%의 수율로 합성하였다.

  • PDF

PET직물의 NaOH/4급암모늄염 혼합액에 의한 물성변화 (The Change of the Physical Properties of PET Fabrics Treated in NaOH/Quarternary Ammonium Salt Compound Solution)

  • 오수민;조승식
    • 한국의류학회지
    • /
    • 제18권3호
    • /
    • pp.287-297
    • /
    • 1994
  • The purpose of this study is to investigate the Improvement of fiber surface, tenacity & elogation, fabric counts, thickness, handle, moisture regain, static voltage, handle, dyeability when polyester fabrics are treated with NaOH solution adding quartemary ammonium salt (Benzyl dimetyl dodecyl ammonium chloride . BDMDAC) The results are as follows. I. In regard to the method of processing VET, when the PET fabrics are alkaline-hydrolyzed adding BDMDAC, the weight loss of PET fabrics increased remarkably to the increse of BDMDAC concentration than when they are treated only in NaOH solution. When PET fabrics are alkaline-hydrolyzed the amount of BDMDAC as the catalyst is proper lg/1 II. The change in physical & chemical properties of alkaline-hydrolyzed PET fabrirs. 1. As the amount of the weight loss on PET fabrics increased, the void space of the PET yale increased but tenacity & elongation and thickness decreased. 2. The fabric counts of PET increased due to shrinkage by alkaline-hydrolydzing. 3. As the amount of of the weight loss on PET fabrics increased. NUMERI, FUKURAMI, increaseed and KOSHI decreased and Total hand value(T.H.V) in all cases increaseed. When the weight Ioss is 30.9% T.H.V. is best. 4. Moisture regain of PET fabrics a little increased by alkaline-hydrolyzing treatment. As the weight loss increased, static voltage is decreased. 5. The last dye absorption is different according to the degree of the Affinity. In regard to the difference of dye color, the dyestuff of low molecular weight dyed for deep color.

  • PDF