• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.333-340
• /
• 2013

PURPOSE. This study was accomplished to assess the biomechanical state of different retaining methods of bar implant-overdenture. MATERIALS AND METHODS. Two 3D finite element models were designed. The first model included implant overdenture retained by Hader-clip attachment, while the second model included two extracoronal resilient attachment (ERA) studs added distally to Hader splint bar. A non-linear frictional contact type was assumed between overdentures and mucosa to represent sliding and rotational movements among different attachment components. A 200 N was applied at the molar region unilaterally and perpendicular to the occlusal plane. Additionally, the mandible was restrained at their ramus ends. The maximum equivalent stress and strain (von Mises) were recorded and analyzed at the bone-implant interface level. RESULTS. The values of von Mises stress and strain of the first model at bone-implant interface were higher than their counterparts of the second model. Stress concentration and high value of strain were recognized surrounding implant of the unloaded side in both models. CONCLUSION. There were different patterns of stress-strain distribution at bone-implant interface between the studied attachment designs. Hader bar-clip attachment showed better biomechanical behavior than adding ERA studs distal to hader bar.

• 성인간호학회지
• /
• 제16권1호
• /
• pp.90-101
• /
• 2004

Purpose: The purpose was to examine the effectiveness of a psychosocial stress management program on stress and coping in student nurses. Method: A nonequivalent control group pre-posttest design was used. A convenience sample of 24 students from the Department of Nursing, Wonju College of Medicine, Yonsei University were assigned to experimental (n=12) and control groups(n=12). Stress was measured using the Visual Analog Scale (10 points) and blood cortisol. Coping was measured using a scale modified by So (1995) based on the Ways of Coping Checklist developed by Folkman and Lazarus (1985). Depression was measured using the CES-D by Radloff (1977) and state anxiety, using the State Anxiety Inventory by Spielberger (1976). The psychosocial stress management program included education, relaxation (Korean Dan Jeon-typed Breathing and music), and social support. Result: Results showed for the two groups, 1) a significant difference in stress scores (U= 19.50, p=0.002), 2) no difference in cortisol levels (8am, 4pm), 3) a significant difference in problem-focused coping (U=25.50, =0.007), 4) no difference in emotion-focused coping, and 5) no difference in state anxiety and depression. Conclusion: By utilizing the program, students were able to learn how to control their stress and improve their coping. Therefore with a partial modification, psychosocial stress management can be useful for continual management of stress in student nurses.

• Structural Engineering and Mechanics
• /
• 제44권2호
• /
• pp.139-161
• /
• 2012

In this paper, the static behavior of bi-directional functionally graded (FG) non-uniform thickness circular plate resting on quadratically gradient elastic foundations (Winkler-Pasternak type) subjected to axisymmetric transverse and in-plane shear loads is carried out by using state-space and differential quadrature methods. The governing state equations are derived based on 3D theory of elasticity, and assuming the material properties of the plate except the Poisson's ratio varies continuously throughout the thickness and radius directions in accordance with the exponential and power law distributions. The stresses and displacements distribution are obtained by solving state equations. The effects of foundation stiffnesses, material heterogeneity indices, geometric parameters and loads ratio on the deformation and stress distributions of the FG circular plate are investigated in numerical examples. The results are reported for the first time and the new results can be used as a benchmark solution for future researches.

• 한국건설순환자원학회논문집
• /
• 제9권1호
• /
• pp.41-49
• /
• 2021

3D 프린팅 시공기술은 주로 거푸집 없이 시멘트계 재료를 적층하여 생산하는 방식을 활용한다. 3D 프린팅 시멘트계 재료는 굳지 않은 상태에서 이송성, 토출성, 적층성 관련 성능이 요구되기 때문에 기존 시공방식에서 사용되던 재료 물성에 대한 추가적인 고려가 필요하다. 이 연구의 목적은 국내외의 3D 프린팅 시멘트계 재료의 유변학적 특성에 대한 기존 연구 사례들을 비교 분석하여 3D 프린팅 시멘트계 재료의 요구 성능과 유변학적 물성과의 연관성을 조사하는 것이다. 3D 프린팅 시멘트계 재료의 점성, 항복응력, 틱소트로피에 대한 실험을 진행했던 이전 연구 사례들의 장비, 실험 및 평가 방식, 사용한 혼화제 특징을 기준으로 분류하여 조사하였다. 본 연구에서는 3D 프린팅 재료의 요구 성능을 정성적으로 유변학적 물성과의 연관성을 나타내었다. 이 연구의 결과로부터 점성은 주로 이송성과 관련이 있고 시간에 따른 항복응력의 변화, 틱소트로피는 3D 프린팅 시멘트계 재료의 적층 성능과 밀접한 관련이 있음을 확인하였다.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.937-943
• /
• 2023

In this study, the mast cover of submarine was reverse engineered and structural analysis was performed. In order to print with the 3D printer, the modeling was reduced to 1/5 size by applying geometric similarity. From the structural analysis results, it was found that the maximum value of equivalent stress generated in the mast cover was 180.9 MPa. This stress value occurs on the inner surface in the major axis. As a result of applying the load condition at a diving depth of 600 m, the mast cover is in a completely elastic state. The 1/5 size model printed on FDM 3D printer with PLA filament was the same as the reverse engineered modeling and it was printed in a perfect shape with no apparent defects. The 1/5 size model printed on PBF 3D printer with SUS316L powder was perfectly manufactured with no apparent defects.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권2호
• /
• pp.193-200
• /
• 2008

탄-소성론에 근거한 콘크리트나 토질과 같은 재료의 파괴 포락선은 주응력을 축으로 하는 공간 좌표계상에서 인장의 등압(hydrostatic stress)축을 향해 기울어진 형태를 가지며 소성흐름이 상관소성흐름 법칙(associated flow rule)에 따라 결정될 경우 콘크리트의 거동 예측시에 과도한 체적 팽창률을 나타내게 된다. 본 논문에서는 콘크리트의 다축응력 하에서의 거동을 예측하기 위하여 비균일 경화(nonuniform hardening)를 적용한 5계수 파괴 포락선과 등압축 방향 성분의 소성 흐름을 수정하는 비상관 소성흐름 법칙(non-associated flow rule)을 사용하여 비선형 유한요소해석 프로그램을 개발하였으며 신뢰성 있는 연구자의 다축응력 실험결과와 유한요소해석 프로그램의 해석결과를 비교하였다.

• Animal Bioscience
• /
• 제34권3_spc호
• /
• pp.405-416
• /
• 2021

Objective: This study evaluated the effects of feeding diets naturally contaminated with deoxynivalenol (supplemental 2 mg/kg) on health, growth, and the effects of a mycotoxin-detoxifying additive in newly-weaned pigs. Methods: Thirty-six pigs (27 day-old) were housed individually and assigned to 3 treatments for 5 weeks: CON (diet containing minimal deoxynivalenol), MT (diet with supplemental 1.9 mg/kg of deoxynivalenol), and MT+D (MT + mycotoxin-detoxifying additive, 0.2%, MegaFix, ICC, São Paulo, Brazil). The mycotoxin-detoxifying additive included bentonite, algae, enzymes, and yeast. Blood was taken at week 2 and 5. Jejunal tissue were taken at week 5. Data were analyzed using the MIXED procedure of SAS. Results: Pigs fed MT+D tended to have decreased (p = 0.056) averaged daily feed intake during week 1 than MT. At week 2, serum aspartate aminotransferase/alanine aminotransferase in MT tended to be lower (p = 0.059) than CON, whereas it was increased (p<0.05) for MT+D than MT, indicating hepatic damages in MT and recovery in MT+D. Pigs fed MT had lower (p<0.05) blood urea nitrogen/creatinine than CON, supporting hepatic damage. At week 5, pigs fed MT tended to have reduced (p = 0.079) glucose than CON, whereas it was increased (p<0.05) for MT+D than MT, indicating impaired intestinal glucose absorption in MT, which was improved in MT+D. Pigs fed CON tended to have increased (p = 0.057) total glutathione in jejunum than MT, indicating oxidative stress in MT. Pigs fed MT+D had a reduced (p<0.05) proportion of Ki-67-positive cells in jejunum than MT, indicating lower enterocyte proliferation in MT+D. Conclusion: Feeding supplemental 1.9 mg/kg of deoxynivalenol reduced growth and debilitated hepatic health of pigs, as seen in leakage of hepatic enzymes, impaired nitrogen metabolism, and increase in oxidative stress. The mycotoxin-detoxifying enhanced hepatic health and glucose levels, and attenuated gut damage in pigs fed deoxynivalenol contaminated diets.

• Smart Structures and Systems
• /
• 제22권3호
• /
• pp.259-276
• /
• 2018

This paper studies the energies and energy release rate (ERR) for the initially rotationally symmetric compressed (or stretched) in the inward (outward) radial direction of the PZT/Elastic/PZT sandwich circular plate with interface penny-shaped cracks. The investigations are made by utilizing the so-called three-dimensional linearized field equations and relations of electro-elasticity for piezoelectric materials. The quantities related to the initial stress state are determined within the scope of the classical linear theory of piezoelectricity. Mathematical formulation of the corresponding problem and determination of the quantities related to the stress-strain state which appear as a result of the action of the uniformly normal additional opening forces acting on the penny-shaped crack's edges are made within the scope of the aforementioned three-dimensional linearized field equations solution which is obtained with the use of the FEM modelling. Numerical results of the energies and ERR and the influence of the problem parameters on these quantities are presented and discussed for the PZT- 5H/Al/PZT-5H, PZT-4/Al/PZT-4, $BaTiO_3/Al/BaTiO_3$ and PZT-5H/StPZT-5H sandwich plates. In particular, it is established that the magnitude of the influence of the piezoelectricity and initial loading on the ERR increases with crack radius length.

• 동의신경정신과학회지
• /
• 제33권1호
• /
• pp.33-48
• /
• 2022

Objectives: Academic stress poses a significant risk for the mental health of medical students, and a feasible group intervention program for managing academic stress is required. The purpose of this study was to examine the clinical effectiveness of emotional freedom techniques (EFT) on the mental health of Korean medical students. Methods: The class of first-year medical school students (n=36) participated in an after-school EFT group intervention program comprising six sessions (15 minutes/session, three weeks) to analyze its clinical effectiveness as a single-group test-retest clinical study. The changes in the Perceived Stress Scale (PSS), Test Anxiety Inventory (TAI), Positive and Negative Affect Schedule (PANAS), and State-Trait Anxiety Inventory (STAI) scores were examined using a paired t-test and Cohen's D at post-EFT and two-week follow-up. Results: There were significant curtailments at post-EFT and follow-up measures in TAI-Total (t=2.704 and t=3.289), TAI-Worry (t=2.297 and t=2.454), TAI-Emotionality (t=2.763 and t=3.654), PSS-Negative Perspective (t=2.659 and t=3.877), and PANAS-Negative Affect (t=2.885 and t=3.259) subscales, however not in PSS-Positive Perspective (t=-1.279 and t=-1.101) and PANAS-Positive Affect (t=0.194 and t=-0.122) subscales. The trait anxiety (t=2.227) was significantly mitigated in the post-EFT measure and the state anxiety (t=2.30) in the follow-up measure. Conclusions: The EFT group intervention alleviated test stress, negative affect, and anxiety in the Korean medical students. This study contributes to an understanding of academic stress and EFT intervention in the competitive environment of medical education.

• Structural Engineering and Mechanics
• /
• 제71권6호
• /
• pp.713-738
• /
• 2019

In the paper the dynamics of the oscillating moving load acting in the interior of the hollow cylinder surrounded with elastic medium is studied within the scope of the exact field equations of 3D elastodynamics. It is assumed that the oscillating load act on the certain arc of the internal circle of the cylinder's cross section and this load moves with constant velocity along the cylinder's axis. The corresponding 3D dynamic problem is solved by employing moving coordinate system, the exponential Fourier transform and the presentation these transforms with the Fourier series. The expressions of the transforms are determined analytically, however their originals are found numerically. Under the investigations carried out in the paper the main attention is focused on the so-called "gyroscopic effect", according to which, the influence of the vibration frequency on the values of the critical velocity and interface stresses are determined. Numerical results illustrated this effect are presented and discussed. In particular, it is established how the non-axisymmetricity of the problem acts on the influence of the load oscillation on its critical velocity and on the interface stresses.