• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.102-109
• /
• 2019

Purpose: The purpose of this study was to evaluate the accuracy of three types of intraoral scanners and the accuracy of the single abutment and bridge abutment model. Materials and methods: In this study, a single abutment, and a bridge abutment with missing first molar was fabricated and set as the reference model. The reference model was scanned with an industrial three-dimensional scanner and set as reference scan data. The reference model was scanned five times using the three intraoral scanners (CS3600, CS3500, and EZIS PO). This was set as the evaluation scan data. In the three-dimensional analysis (Geomagic control X), the divided abutment region was selected and analyzed to verify the scan accuracy of the abutment. Statistical analysis was performed using SPSS software (${\alpha}=.05$). The accuracy of intraoral scanners was compared using the Kruskal-Wallis test and post-test was performed using the Pairwise test. The accuracy difference between the single abutment model and the bridge abutment model was analyzed by the Mann-Whitney U test. Results: The accuracy according to the intraoral scanner was significantly different (P < .05). The trueness of the single abutment model and the bridge abutment model showed a statistically significant difference and showed better trueness in the single abutment (P < .05). There was no significant difference in the precision (P = .616). Conclusion: As a result of comparing the accuracy of single and bridge abutments, the error of abutment scan increased with increasing scan area, and the accuracy of bridge abutment model was clinically acceptable in three types of intraoral scanners.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1920-1926
• /
• 2010

Yoon et $al.^1$ presented an approximate mathmatical model to describe ammonia removal from an experimental batch reactor system with gaseous headspace. The development of the model was initially based on assuming instantaneous equilibrium between ammonia in the aqueous and gas phases. In the model, a "saturation factor, $\beta$" was defined as a constant and used to check whether the equilibrium assumption was appropriate. The authors used the trends established by the estimated $\beta$ values to conclude that the equilibrium assumption was not valid. The authors presented valuable experimental results obtained using a carefully designed system and the model used to analyze the results accounted for the following effects: speciation of ammonia between $NH_3$ and $NH^+_4$ as a function of pH; temperature dependence of the reactions constants; and air flow rate. In this article, an alternative model based on the exact solution of the governing mass-balance differential equations was developed and used to describe ammonia removal without relying on the use of the saturation factor. The modified model was also extended to mathematically describe the pH dependence of the ammonia removal rate, in addition to accounting for the speciation of ammonia, temperature dependence of reactions constants, and air flow rate. The modified model was used to extend the analysis of the original experimental data presented by Yoon et $al.^1$ and the results matched the theory in an excellent manner.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.2
• /
• pp.202-210
• /
• 2012

The purpose of this study was to bake sweet rice muffins with oak mushroom ($Lentinus$ $edodes$) powder. The process included substituting sweet rice flour for cake flour and adding oak mushroom powder. This study determined the optimal mixing conditions of oak mushroom muffins by adjusting the amounts of oak mushroom powder, whole eggs, and soybean oil. The mixing conditions for the oak mushroom muffins included 3 categories: oak mushroom powder (X1), whole eggs (X2), and soybean oil (X3) by Central Composite Design (CCD) which was optimized by Response Surface Methodology (RSM). Oak mushroom muffin formulation was optimized using rheology. Yellowness (p<0.001) and redness (p<0.05) displayed a linear model pattern, whereas lightness (p<0.05) was represented by a quadratic model. Among the sensory properties, variables that appeared to show significant values such as appearance (p<0.5), texture (p<0.5), and overall quality (p<0.5) were used to identify optimums. The result of mechanical properties showed significant values in gumminess (p<0.5) and chewiness (p<0.5). The numerical and graphical methods used in this study determined that the optimum formulation for oak mushroom powder sweet rice muffins was 8.75 g of oak mushroom powder, 235.95 g of whole eggs, and 19.93 g of soybean oil.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.8
• /
• pp.3747-3752
• /
• 2014

Background: Gallbladder carcinoma (GBC) is the most common carcinoma of the biliary system. Among its research models, orthotopic xenograft models, important research tools, have been rarely reported in the literature however. Aim: To explore establishment of an orthotopic xenograft model and to evaluate the advantage and disadvantage as compared with other models. Materials and Methods: Subcutaneous xenograft and orthotopic xenograft models of gallbladder carcinoma in nude mice were established and compared with human gallbladder carcinomas. Results: For the orthotopic xenograft model and clinical gallbladder carcinomas, the lymph node metastatic rates were 69.2% and 53.3% (p>0.05); ascites generation rates, 38.5% and 11.7%(p<0.05); liver invasive rates, 100% and 61.7%(p<0.05); and lymphatic vessel densities (LVD), $10.4{\pm}3.02$ and $8.77{\pm}2.92$ (p>0.05), respectively. In the subcutaneous xenograft model, no evidence of ascites generation, lymph node metastasis and liver metastasis were found, and its LVD was lower ($4.56{\pm}1.53$, p<0.05). Conclusions: Compared with the subcutaneous xenograft model, the orthotopic xenograft model better simulates clinical gallbladder carcinoma in terms of metastasis and invasion, which may be attributed to the difference in microenvironment and LVD.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.510-521
• /
• 2006

This investigation was undertaken to examine the extent to which tooth size and arch dimension each contribute to dental crowding. The sample included 50 subjects with well aligned dentition (25 males, 25 females) and those of 40 subjects with gross dental crowding(20 males, 20 females). Plaster model and digital model made from alginate impression taken at the one visit. Tooth size, arch length, arch perimeter, intercanine width and intermolar width was measured on the plaster and digital models. The findings in this study lead to the following conclusions. 1. In maxilla, the mesiodistal diameters of lateral incisor and premolars of the crowded group were significantly larger than those of the normal occlusion group (P<0.05). 2. In mandible, the mesiodistal diameters of central incisor, canine and premolars of crowded group were significantly larger than those of the normal occlusion group (P<0.05). 3. In maxilla, arch perimeter and intermolar width of crowded group were significantly smaller than normal occlusion group but intercanine width of crowded group were larger than normal occlusion group (P<0.05). There was no significantly difference in arch length (P>0.05). 4. In mandible, arch perimeter of crowded group was smaller than normal occlusion group(P<0.05). There were no difference in arch length intermolar width and intercanine width (P>0.05) 5. In the analysis of correlation coefficients of arch length discrepancy with variables, arch perimeter, intermolar width and mesiodistal width of 2nd premolar showed positive correlations in maxilla. 6. There was a significant difference between tooth width measurements made by the 2 methods, with all the digital model measurement larger than plaster model measurements (P<0.05) : the magnitude of the differences does not appear to be clinically relevant. 7. In the analysis for reproducibility, the plaster model measurement was showed lower degree of correlation between 1st and 2nd measurement than digital model.

• Culinary science and hospitality research
• /
• v.22 no.5
• /
• pp.13-24
• /
• 2016

This research was conducted over four weeks from February 1, 2016 until Februay 29. Results were as follows. First, the effects of dietary lifestyle on the purchase intention of consumers was significant and postive, while food flavors (B=0.019 (p<.001)) and convenience (B=0.055 (p<.001)) had a significant and negative effect. To determine the coefficient to measure the adequacy of the model was explained 64.9% of variation in 0.649 premise, the model with F=187.244 (p<.001) to verify the significance level. Second, the moderating effects of consumer culture on the proposed realtionship was examined in 3 stages. The Stage 1 model found a significant effect (0.649, F=18.244 (p<0.01)). The Stage 2 model increased predictive power with the addition of "consumer culture" and was also significant(65.1% and F=142.119 (p<0.01)). The Stage 3 model increased the explanatory power due to the addition of 'lifestyle and found a significant moderating effect of 'Eating consumer culture' (65.9%, so for F=84.469 (p<0.01)).

• Journal of Environmental Science International
• /
• v.21 no.7
• /
• pp.805-813
• /
• 2012

The removal property of Cu and Zn ions by chemical precipitation and adsorption using zeolite(Z-C1) prepared from coal fly ash(CFA) were evaluated in this study. Adsorption kinetic and equilibrium mechanisms described to analyze parameters and correlation factors with Lagergen $1^{st}$ and $2^{nd}$ order model and Langmuir and Freundlich model. Analysis of adsorption kinetics data revealed that the pseudo $2^{nd}$ order kinetics mechanism was predominant. The equilibrium data in pH 3 - 5 were able to be fitted well to a Langmuir model, by which the maximum adsorption capacities($q_{max}$) were determined at 124.9 - 140.1 mg $Cu^{2+}/g$ and 153.2 - 166.9 mg $Zn^{2+}/g$, respectively. We found that Z-C1 has a potential application as absorbents in metal ion recovery with low pH.

• Nuclear Engineering and Technology
• /
• v.49 no.3
• /
• pp.534-540
• /
• 2017

The adsorption of uranium (VI) by calcium alginate beads was examined by batch experiments. The effects of environmental conditions on U (VI) adsorption were studied, including contact time, pH, initial concentration of U (VI), and temperature. The alginate beads were characterized by using scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. Fourier transform infrared spectra indicated that hydroxyl and alkoxy groups are present at the surface of the beads. The experimental results showed that the adsorption of U (VI) by alginate beads was strongly dependent on pH, the adsorption increased at pH 3~7, then decreased at pH 7~9. The adsorption reached equilibrium within 2 minutes. The adsorption kinetics of U (VI) onto alginate beads can be described by a pseudo first-order kinetic model. The adsorption isotherm can be described by the Redlich-Peterson model, and the maximum adsorption capacity was 237.15 mg/g. The sorption process is spontaneous and has an exothermic reaction.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.34 no.2
• /
• pp.77-90
• /
• 2009

Total profit level Increases if a company increase the cost for achieving R&D related goals of equipment productivity enhancement, production cost saving, or for achieving equipment scale target, sales volume goal. But how much money should be invested to achieve a certain level of profit? We formulated the model to set the optimal goal levels to minimize the investment cost under the constraint that certain level of total profit should be guaranteed. This model derived from a case of P steel company. We found that this should be considered in relation with the production sales planning (known as optimal product mix problem) to guarantee the profit. We suggested a nonlinear programming model, 3 valiant form of the p+roduct mix problem. We can find the optimal Investment level for the R&D related goals or sales volume goal, equipment scale target for the P steel company using the model.

• Journal of Information Technology Services
• /
• v.6 no.3
• /
• pp.69-86
• /
• 2007

As most of firms related with P2P services change their free services into fee-charging services, the problems of intellectual property rights are solved to satisfactory extent. Accordingly, P2P systems become more popular with the general public. In this respect, it is thought to be very important to research on the critical factors affecting usage of P2P systems. Although it is strongly expected that the characteristics of users activities in virtual communities affect the intention to re-use P2P systems, relatively few attention have been paid to this question. Therefore, this paper is to present empirical evidence to explain how the characteristics of users activities in virtual communities affect re-use intention of P2P services. The theoretical contribution of this study is that the characteristics of users activities in virtual communities is theoretically derived from the comprehensive literature review and the logical reasoning, and that the research model of the relationship between the users activities' characteristics in virtual community and the re-use intention of P2P services is proposed and empirically validated, which is expected to expand explaining power of the TAM(Technological Acceptance Model). Also, the practical implication is to provide the guideline to support the successful strategic planning for development and.operation of P2P services through the virtual communities.