• Journal of Chest Surgery
• /
• v.43 no.5
• /
• pp.506-512
• /
• 2010

Background: This study was designed to evaluate the FDG uptake ratio of mediastinal node and primary tumors using integrated PET/CT imaging combined with Glut-1 expression of the primary tumor in order to predict the N2 status more accurately in NSCLC patients. Material and Method: Patients who underwent integrated PET/CT scanning with a detectable mSUV for both primary tumors and mediastinal lymph nodes were eligible for this study. The FDG uptake ratio between the mediastinal node and the primary tumor was calculated. Result: The average mSUV of primary tumors and mediastinal nodes were, respectively, $7.4{\pm}2.2$ and $4.2{\pm}2.2$ in N2-positive patients and $7.6{\pm}3.7$ and $2.8{\pm}6.9$ in N2-negative patients. The mean FDG uptake ratio of mediastinal node to primary tumor were $0.58{\pm}0.23$ for malignant N2 lymph nodes and $0.45{\pm}0.20$ for benign lymph nodes (p<0.05). Models which combined Glut-1 expression with an FDG ratio have better diagnostic power than models that use the FDG uptake ratio alone. Conclusion: In some patients with a previous history of pulmonary tuberculosis or other inflammatory lung diseases, an FDG uptake ratio combined with Glut-1 expression may be useful in diagnosing mediastinal node metastasis more exactly.

• Journal of the Korean Society of Radiology
• /
• v.85 no.2
• /
• pp.372-380
• /
• 2024

Purpose This study aimed to develop a rabbit iliac stenosis model and evaluate the effects of different mechanical injury techniques on the degree of arterial stenosis. Materials and Methods Eighteen rabbits were divided into three groups: cholesterol-fed with pullover balloon injury (group A; n = 6), cholesterol-fed with localized balloon dilatation (group B; n = 6), and chow-diet with pullover balloon injury (group C; n = 6). After baseline angiography, the left iliac arteries of all rabbits were injured with a 3 × 10 mm noncompliant balloon using either a wide pullover technique (groups A and C) or a localized balloon dilatation technique (group B). A nine-week follow-up angiography was performed, and the angiographic late lumen loss and percentage of stenosis were compared. Results Group A exhibited the most severe late lumen loss (A vs. B, 0.67 ± 0.13 vs. 0.04 ± 0.13 mm, p < 0.0001; A vs. C, 0.67 ± 0.13 vs. 0.26 ± 0.29 mm, p < 0.05; stenosis percentage 32.02% ± 6.54%). In contrast, group B showed a minimal percentage of stenosis (1.75% ± 6.55%). Conclusion Pullover-balloon injury can lead to significant iliac artery stenosis in rabbits with controlled hypercholesterolemia. This model may be useful for elucidating the pathogenesis of atherosclerosis and for evaluating the efficacy of novel therapeutic interventions.

• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.343-351
• /
• 2005

This study developed a shear strength prediction model of FRP strengthened reinforced concrete beams in shear. The primary design parameters were shear crack angle and shear span to depth ratio of FRP reinforcement. Of primary concern In the suggested model was the FRP debonding failure, which Is a typical fracture mode of RC beams strengthened with FRP, The proposed model used a crack sliding model based on modified plasticity theory. To address the effect of the shear span to depth ratio, the arch action was considered in the proposed model. The proposed model was applied to RC beams strengthened with FRP. The results showed that the proposed model agree with test results.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.349-356
• /
• 1994

For the deformation, life time prediction and improvement of the life time in high temperature materials it's very important to know the mechanism of deformation. For these mechanisms the dislocation loop models of Orlova et al. and Mills et al. are used often now. But they show controversial differencies, even if they have unertaken similar experimental tests with the same alloy of A1-5.5at.% Mg. In this work also the similiar tests of them have done under the same temperature of 573 K ; (1) The specimen was deformed by $\sigma$= 30MPa and $\varepsilon$=0.03. (2) Direct after creep deformation of $\sigma$= 30MPa and $\sigma$= 0.03 the stress reduction tests to 15, 10 and OMPa have been performed. (3) To study the loop models dislocation structure and dislocation density ( p ) have been observed.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.3
• /
• pp.21-28
• /
• 2008

To evaluate the seismic performance of multi-degree of freedom(MDF) systems, repeated nonlinear response history analyses are often conducted, which require extensive computational efforts. To reduce the amount of computation required, equivalent single degree of freedom(SDF) systems representing complex multi-degree of freedom(MDF) systems have been developed. For the equivalent SDF systems, bilinear models and trilinear models have been most commonly used. In these models, the P-$\Delta$ effect due to gravity loads during earthquakes can be accounted for by assigning negative stiffness after elastic range. This study evaluates the adequacy of equivalent SDF systems having these hysteretic models to predict the actual response of steel moment resisting frames(SMRF). For this purpose, this study conducts cyclic pushover analysis, nonlinear time history analysis and incremental dynamic analysis(IDA) for SAC-Los Angeles 9-story buildings using nonlinear MDF models(exact) and equivalent SDF models(approximate). In addition, this study considers the strength limited model.

• Resources Recycling
• /
• v.21 no.3
• /
• pp.39-47
• /
• 2012

This study was conducted to optimize a mixing design of lightweight aerated concrete with the blast furnace slag(BFS) using Box-Behnken method, one of response surface designs. The lightweight aerated concrete with the BFS was made on the conditions of steam curing method at atmospheric pressure. The experimental factors were unit Water(W)/total powder($P_d$) ratio, BFS replacement percentage and Al powder addition based on the total powder (${P_d}^*$%). From the results of the response surface analysis, regression models for dried specific gravity and compressive strength of the lightweight aerated concrete were derived. When the target values for dried specific gravity and compressive strength of the lightweight aerated concrete were set at 0.72 and 4.42 MPa respectively, its optimized mixing conditions driven from the regression models were 0.62 of $W/P_d$ ratio, 35.5% of BFS replacement and 0.05% of Al powder addition. This experimental design model was found to be credible by measuring the dried specific gravity and compressive strength of the sample made from the above mixing conditions.

• The Journal of Korean society of community based occupational therapy
• /
• v.8 no.3
• /
• pp.69-76
• /
• 2018

Objective : The study was to investigate the neurophysiological approach to the effect of complex exercise on memory, one of brain functions, and the degree of sleep disorder using experimental animals with sleep disorders. Methods : This study carried out a complex exercise that designed in an animal laboratory for 4 days to 16 sleep - disordered model rats. After the exercise, brain function was confirmed with the changes of BDNF in the hippocampus and the change of sleep level was confirmed with the concentration of melatonin in the blood. Results : First, the effect of the complex exercise program on brain function was significantly increased in the experimental group(p<0.01). Second, the effect of complex exercise program on sleep disturbance was significantly increased in the experimental group and control group(p<0.01)(p<0.05). Conclusion : The rate of increase of the elderly in the community is rapidly increasing, and the sleep disorder of the elderly can affect the quality of life of these elderly people. Secondary memory impairment due to sleep disturbances can also be a problem. Although there are many ways to improve sleep disturbance, it has been scientifically proven through experimental animals that sleep and memory can be improved with complex exercise that is not economically, spatially burdensome.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.2
• /
• pp.202-207
• /
• 1995

The effects of lipoxygenase, linoleic acid, tocopherol and pH on the co-oxidation of $\beta$-carotene in the aqueous system were studied. It showed that the co-oxidation of $\beta$-carotene was noticeable at both pH 7.4 and 9.0. As the concentraitons of linoleic acid and $\beta$-carotene increased, the rate of oxidation of $\beta$-carotene tended to be increased. However, $\alpha$- and $\delta$-tocopherol retarded the co-oxidation of $\beta$-carotene. As the concentrations of tocopherols increased, $\beta$-carotene was more stabilized, generally. But low concentration of $\alpha$-tocopherol(10-4M) acted more effective antioxidant than high concentration of it(10-3M) at pH 7.4. The antioxidant effect of tocopherol greatly depended on pH ; it was outstanding at pH 7.4.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.237-238
• /
• 2023

Urbanization and the increase in building scale have amplified the complexity of M.E.P design. Traditional design methods face limitations when considering intricate pathways and variables, leading to an emergent need for research in automated design. Initial algorithmic approaches encountered challenges in addressing complex architectural structures and the diversity of M.E.P types. However, with the launch of OpenAI's ChatGPT-3.5 beta version in 2022, new opportunities in the automated design sector were unlocked. ChatGPT, based on the Large Language Model (LLM), has the capability to deeply comprehend the logical structures and meanings within training data. This study analyzed the potential application and latent value of LLMs in M.E.P design. Ultimately, the implementation of LLM in M.E.P design will make genuine automated design feasible, which is anticipated to drive advancements across designs in the construction sector.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.1
• /
• pp.60-69
• /
• 2016

Purpose: The objective of this study was to compare the accuracy of digital models from 3 dimentional (3D) optical scanner and cone beam computed tomography (CBCT). Materials and Methods: We obtained digital models from 11 pairs of stone casts using a 3D optical scanner and a CBCT, and compared the accuracy of the models. Results: The error range of average positive distance was 0.059 - 0.117 mm and negative distance was 0.066 - 0.146 mm. Statistically (P < 0.05), average positive distance was larger than $70{\mu}m$ and shorter than $100{\mu}m$, and that of negative distance was larger than $100{\mu}m$ and shorter than $120{\mu}m$. Conclusion: We concluded that the accuracy of digital models generated from CBCT is not appropriate to make final prostheses. However, it may be acceptable for provisional restorations and orthodontic diagnoses with respect to the accuracy of the digitalization.