Journal of the Korean Society of Clothing and Textiles
/
v.24
no.3
/
pp.440-447
/
2000
The effects of DP finishing conditions including process technique and finishing agent on the mechanical properties and hand of cotton fabrics were investigated. 100% cotton fabrics were treated with NMA/DMDHEU and NMA/YF using wet-fixation and steam-fixation process. For comparison, conventional pad-dry-cure process was used with DMDHEU. After DP finishing, tensile and compressional resilience increased and bending hysteresis decreased, resulting in the improvement of dimensional stability of cotton fabric. WF and SF process rendered fabrics better shear properties, tensile energy, and compressional linearity and energy than PDC process. However, SF process produced fabrics with higher geometrical roughness than WF process. After DP finishing, primary hand values except Koshi increased, resulting in the increase of total hand value of cotton fabric.
Ninahuanca, Jose Luis Hinostroza;Tormena Jr., Osmar;Meloni, Luis Geraldo Pedroso
ETRI Journal
/
v.43
no.6
/
pp.978-990
/
2021
This article presents techniques for improved estimation of symbol timing offset (STO) and carrier frequency offset (CFO) for dual-polarization (DP) orthogonal frequency division multiplex (DP-OFDM) systems. Recently, quaternion multiple-input multiple-output OFDM has been proposed for high spectral efficiency communication systems, which can flexibly explore different types of diversities such as space, time, frequency, and polarization. This article focuses on synchronization techniques for DP-OFDM systems using a cyclic prefix, where the application of quaternion algebra leads to new improved estimators. Simulations performed for DP system methods show faster reduction of STO estimator variance with a double-slope line in the logvariance line versus signal-to-noise ratio (SNR) plot compared with singlepolarization (SP) counterparts, and simulations for CFO estimates show a 3-dB gain of DP over SP estimates for same SNR values defined, respectively, for quaternion-valued or complex-valued signals. Cramer-Rao bounds for STO and CFO are derived for the synchronization methods, correlating with the observed gains of DP over SP OFDM systems.
Cereal $\beta$-glucans, linked essentially by mixed $\beta$-(1,4/1,3) glycosidic bonds, were extracted, purified, and structurally identified. Previously chemical structure of barley $\beta$-glucans was characterized from 3 varieties of 'Gang', 'Ohl', and 'Gwangan', and the (1,4)/(1,3) linkage ratio of the $\beta$-glucans was identical. In this study, $\beta$-glucans from 1 barley ('Chal') and 3 oat ('Ohl', 'Samhan', and 'Donghan') varieties were structurally scrutinized, and the linkage pattern of total 7 cereal $\beta$-glucans was compared. The amount of 2 major 3-O-$\beta$-cellobiosyl-D-glucose (DP3) and 3-O-$\beta$-cellotriosyl-D-glucose (DP4) from barley and oat accounted for only 66.6-73.3 and 68.12-81.89% of water-extractable $\beta$-glucan fractions, and the (1,4)/(1,3) linkage ratios of both barley and oat $\beta$-glucans were within very narrow range of 2.27-2.31 and 2.38-2.39, respectively, among the cultivars tested. Structural difference in the cereal $\beta$-glucans was evident when DP3:DP4 ratio in the $\beta$-glucan structure was compared. As a result, this ratio was significantly greater for barley $\beta$-glucan (2.26-2.74) than for oat (1.54-1.66). Chal-B had the greatest DP3 to DP4 ratio among the samples, which in turn reflected the least amount of (1,4)-linkages.
Solid freeform fabrication (SFF) technology plays a major role in industry and represents a reasonable percentage of industrial rapid prototyping/tooling/manufacturing (RP/RT/RM) development applications. However, SFF technology still has long way to progress to achieve satisfactory process speed, surface finish and overall quality improvement of its application. Today, three dimensional printing (3DP) technique that is one of SFF technology is receiving many interests, and is applied by various fields. It can fabricate three dimensional objects of solid freeform with high speed and low cost using ink jet printing technology. However, need long curing time after manufacture completion. And it must do post-processing process necessarily to heighten strength of objects because strength of fabricated objects is very weak. Therefore, in this study, we proposed an improved 3DP process that can solve problems of conventional 3DP process. The general 3DP process is method to spout binder simply through printer head on powder, but proposed process is method to cure jetted UV resin by UV lamp after jet UV resin using printhead on powder. The hardening of resin is achieved strongly at early time by UV lamp in proposed method. So, the proposed process can fabricate three dimensional objects with high speed without any post-processing.
Two experiments were conducted to evaluate dry pellet on growth of juvenile Korean rockfish (sebastes schlegeli) by comparing with moist pellet and raw fish-based moist pellet. In the first experiment, three replicate groups of 40 fish averaging 4.7 g were fed one of the following three experimental diets for 11 weeks : d교 pellet (DP) and moist pellet (MP) diets containing $56\%$ white fish meal (WFM) + $3\%$ soybean meal (SM) + $5\%$ corn gluten meal (CGM) as protein sources, or raw fish-based moist pellet (RMP, $50\%$ frozen horse mackerel+$50\%$ commercial fish feed). No significant differences were found among fish fed different pellet types of diets in daily weight gain and whole body composition (P>0.05). In the second experiment, two replicate groups of 140 fish averaging 10.9 g were fed one of the following three experimental diets for 8 weeks : DP and MP diets containing $38\%$ WFM+$15\%$ SM+$10\%$ CGM as protein sources, or RMP. Daily weight gain and feed efficiency from fish fed RMP were significantly (P>0.05) higher than those from fish fed DP diet. These different growth responses between two experiments may be due to dietary protein sources and nutrient content. findings showed that DP can be used as a practical diet for juvenile Korean rockfish.
This study was carried out to determine the optimum harvest date of unshelled immature peanuts and dried kernels from 60 to 120 days after flowering. Fresh pod yield of spanish-type variety, 'Shaedl-tangkong(SD)' reached a peak of 9,140kg/ ha at 70 (days after flowering(Aug. 13) while that of virginia-type variety, 'Daepoongtangkong(DP)' reached a peak of 8,820kg/ha at 90 days(Sept. 11) after flowering. SD and DP showed maximum fresh kernel yield of 6,090 and 6,470kg/ha at 90 days after flowering (Sept. 11), respectively, while dry kernel yield reached a peak of 3,300 and 3,720kg/ha at 110 days(Oct. 1), respectively. Oil content of SD and DP were the highest at 90 days and 100 days after flowering, respectively and the oil content of two varieties increased rapidly from 60 to 90 days. Tannin content of the seed hull of SD increased continuously until 110 days after flowering while that of DP maximized at 100 days. The tannin content of the two varieties increased rapidly from 60 to 100 days. Total sugar of SD and DP showed highest content at 60 days and 70 days after flowering, respectively and suger content decreased very rapidly until 80 days and after that sugar content kept nearly constant. Oil, tannin and total sugar content of spanish-type SD were higher than those of virginia-type DP.
The relationship betwwen the molecular structure of amylopectin and the texture of cooked rice was investigated using Korean rice [3 varieties of Japonica type and 3 varieties of Tongil type(Japonica-Indica breeding type)]. The molecular structure of rice amylopectin was polymodal and distributed A chain of $\overline{DP}$ 12.4, short B chain of $\overline{DP}$ 20.6, B chain of $\overline{DP}$ 26.3, long B chain of $\overline{DP}$ 45 and super long chain of above $\overline{DP}$ 55. The super long chain of amylopectin was composed of long linear chain with poorly branched chain. Also, the super long chain of amylopectin showed positive correlated with average chain length, inherent viscosity and ${\beta}-amyloysis$ limit$({\%})$, but negative correlated with ${\lambda}max$ of iodine reaction of amylopectin. The structural properties of amylopectin in Japonica type were different from those of amylopectin in Tongil type. In relationship between molecular structure of amylopectin and texture of cooked rice, the average chain length, inherent viscosity, ${\beta}-amyloysis$ limit and super long chain of amylopectin was showed a positive correlation with hardness, but a negative correlation with adhesiveness of cooked rice. The long chain of rice amylopectin is the less, the eating quality of cooled rice was the better. These results suggest that the molecular structure of rice amylopectin could be responsible for the texture of cooked rice.
Journal of the Korean Society of Marine Environment & Safety
/
v.21
no.5
/
pp.515-523
/
2015
This study reviewed 612 DP LOP(Loss of Position) incident reports which submitted to IMCA from 2001~2010 and identified 103 human error caused incidents and classified it through HFACS. And, this study analysis of conditional probability of human error on DP LOP incidents through application of bayesian network. As a result, all 103 human error related DP LOP incidents were caused by unsafe acts, and among unsafe acts 70 incidents(68.0 %) were related to skill based error which are the largest proportion of human error causes. Among skill based error, 60(58.3%) incidents were involved inadvertent use of controls and 8(7.8%) incidents were involved omitted step in procedure. Also, 21(20.8%) incidents were involved improper maneuver because of decision error. Also this study identified that unsafe supervision(68%) is effected as the largest latent causes of unsafe acts through application to bayesian network. As a results, it is identified that combined analysis of HFACS and bayesian network are useful tool for human error analysis. Based on these results, this study suggest 9 recommendations such as polices, interpersonal interaction, training etc. to prevent and mitigate human errors during DP operations.
Ginsenoside Rg4 is a rare ginsenoside that is naturally found in ginseng, and exhibits a wide range of biological activities including antioxidant and anti-inflammatory properties in several cell types. The purpose of this study was to use an in vivo model of hair follicle (HF)-mimic based on a human dermal papilla (DP) spheroid system prepared by three-dimensional (3D) culture and to investigate the effect of Rg4 on the hair-inductive properties of DP cells. Treatment of the DP spheroids with Rg4 (20 to 50 ㎍/ml) significantly increased the viability and size of the DP spheres in a dose-dependent manner. Rg4 also increased the mRNA and protein expression of DP signature genes that are related to hair growth including ALP, BMP2, and VCAN in the DP spheres. Analysis of the signaling molecules and luciferase reporter assays further revealed that Rg4 induces the activation of phosphoinositide 3-kinase (PI3K)/AKT and the inhibitory phosphorylation of GSK3β, which activates the WNT/β-catenin signaling pathway. These results correlated with not only the increased nuclear translocation of β-catenin following the treatment of the DP spheres with Rg4 but also the significant elevation of mRNA expression of the downstream target genes of the WNT/β-catenin pathway including WNT5A, β-catenin, and LEF1. In conclusion, these results demonstrated that ginsenoside Rg4 promotes the hair-inductive properties of DP cells by activating the AKT/GSK3β/β-catenin signaling pathway in DP spheres, suggesting that Rg4 could be a potential natural therapy for hair growth.
Bushing is the key link to connect outer and inner insulating systems and also the essential electric accessory in electric power system, especially in the high voltage engineering (AC 1000kV, DC 800kV). This paper presented the experimental research of thermal aging characteristic of oil-paper insulation used in bushing. A thermally accelerated aging experiment at 90℃ was performed. The bushing models containing five layers of paper were sealed into the aging vessels and further aged for 250 days. Then several important parameters associated with the aging were observed and evaluated. The results showed that the degree of polymerization (DP) of papers gradually decreased. The DP values of outermost layer and middle layer fit well into the second-order kinematic model and first-order kinematic model, respectively. Less deterioration speed of the inter-layer paper than outer layer was confirmed by the variation of DP. Hydrolysis was considered as the main cause to this phenomenon. In addition, the logarithm of the furfural concentrations in insulation oil was found to have good linear relationship with DP of papers. Interestingly, when the aging time is about 250 days and DP is 419, the aging process reaches an inflection point at which the DP approaches the leveling off degree of polymerization (LODP) value. Both tanδ and acid number of oils increased, while surface and volume resistivity of papers decreased. The obtained results demonstrated that thermal aging and moisture absorbed in papers brought great influence to the degradation of insulating paper, leading to rapid decrease of DP and increase of the tanδ. Thus, the bushing should be avoided from damp and real-time monitoring to the variation of tanδ and DP values of paper is an effective way to evaluate the insulation status of bushing.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.