목적 : 의료용 선형가속기의 Independent Collimator는 현재 광범위하게 사용되고 있다. 그러나 방사선량의 계산과 MU(Monitor Unit)의 계산에 사용되는 모든 기본 자료는 대칭 조사면를 기준으로 작성되었기 때문에 independent collimator를 사용한 비대칭적인 조사면의 경우 현재 사용하고 있는 계산 방식을 그대로 적용함에 무리가 있을 것으로 생각된다. 따라서 이러한 의문에 대한 체계적이고 과학적인 검토가 필요할 것으로 사료되어 본 연구를 진행하였다. 대상 및 방법 :본 연구는 Dual Photon Beam(6MV와 15MV)을 산출(産出)하는 선형가속기(Linac 1800, Varian Co)에서 collimator 사용시 산란 방사선의 총채로 표현되어지는 field size factor, beam qualify에 영향을 미치는 HVL와 PDD를 조사하였다. 먼저 field size factor는 water phantom(WP 600C Wellhofer, Germany)내의 Dmax에서 field size $3{\times}3cm$에서 $35{\times}35cm$까지의 방사선량의 변화를 square field로 $1cm^2$씩 증가시켜 가며 0.6cc ion chamber(NE 2571)로 측정하였다. Beam quality는 100cm SSD(source-surface distance)에서 $5{\times}5$, $10{\times}10$, $15{\times}15$ 및 $20{\times}20cm$ field size로 0, 3 및 10cm off-axis distance와 dmax 4, 10, 15 및 20cm의 깊이에서 측정하였다. Dose distribution을 분석하기 위하여 film densitometer와 water phantom(IC 10 ion chamber)을 사용, $10{\times}10cm$ field size에서 5, 10 및 15cm의 off-axis distance까지의 방사선량의 분포를 관찰하고 대칭 방사선 조사면와 비교 분석하여 실제 isodose 분포에 미치는 영향을 관찰하였다. 결과: 1) Relative field size factor는 중심 축에서 off-axis lateral distance에 따라 다양하게 변화하였는데 6MV X-선의 경우 최대 $3.1\%$, 15MV X-선의 경우 최대 $5\%$까지의 변화를 보였다. 이때 off-axis factor를 구하여 교정을 하였을 경우 중심 축의 field size factor와 거의 유사한 값에 도달할 수 있었다. 2) Beam qualify의 변화를 관찰하기 위한 실험에서 HVL는 off-axis distance가 멀어질수록 감소하였고 PDD도 off-axis distance가 멀어지고 측정 깊이가 깊어질수록 감소되는 현상을 보였다. 통상적인 방사선 치료시에 이용되는 $5{\times}5cm$ 이상의 field size와 15cm 이내의 깊이에서는 3cm 와 l0cm의 off-axis에서 6MV X-선은 평균 $0.5\%$와 $2\%$, 15MV X선은 $0.4\%$와 $1.4\%$의 감소 현상을 보여 큰 편차를 관찰할 수 없었다. 3) Isodose distribution은 off-axis distance가 멀어질수록 depth dose의 증가치가 감소되었으며 특히 central axis의 가장자리 부위에서는 isodose curve의 위축이 확연하였다. 결론 : Independent collimator를 사용하여 비대칭 방사선 치료를 할 경우 MU의 계산은 off-axis factor와 PDD 보정이 필수적이며 임상적으로는 중심 축에서의 과소조사에 대한 정밀한 주의가 필요할 것으로 사료된다.
본 논문에서는 무요소 이론을 정식화하였고 이를 이용한 1차원 및 2차원 EFG 프로그램을 Visual Basic과 C언어를 이용하여 작성해 보았다. 그리고 각각의 EFG 수치해석의 예를 작성된 프로그램을 이용하여 해를 구하였다. 해석결과는 다른 문헌의 결과와 일치하였으며 해석결과에서 나타나듯이 무요소 해의 정도는 영향영역의 비례축소인자 dmax와 가중함수의 종류, 절점 배치형태에 의해 좌우된다는 사실을 알 수 있었다. 특히 1, 2차원 EFG 해석결과에서 가장 최적의 해를 보이며 정해(exact solution)에 가장 근접한 조건은 dmax = 2 이고 가중함수가 3차 Spline형일 때로 나타났으며 유한요소법과 마찬가지로 절점의 수가 많을 수록 그리고 절점을 균일하게 배치할수록 높은 정도를 나타내는 것을 알 수 있었다. 특히 2차원의 경우 3차 Spline형 이외의 다른 가중함수를 사용할 경우에 상당히 큰 오차를 나타내는 점은 1차원 EFG 해석의 결과와는 다른 점이었지만 그 외 대부분 같은 결과를 나타내었다. 1차원에서 절점을 임의로 배치한 경우는 비교적 균일하게 배치한 경우가 해에 근접하는 형태를 나타내었으며 절점 간격이 상대적으로 적은 곳에서 큰 오차를 나타내었다. 그리고 절점을 임의로 선택할 때 변위가 모두 ‘0’의 값을 가지는 경우를 볼 수 있는데, 이는 화면상의 좌표계산에서 생긴 미소한 오차가 절점들에 의해 반복됨으로서 발생하는 것으로 보인다. 또한 탄성계수 값이 클 경우 dmax 에서 계산이 제대로 수행되지 못하는 경우가 있는데, 이는 수치가 double형의 크기를 초과하기 때문인 것으로 보인다. 결과에서 나타나듯이 무요소법에서 적당한 가중함수와 비례축소 인자를 사용하면 정해에 가까운 우수한 해를 얻을 수 있다는 것을 알 수 있다. 비록 프로그래밍 과정이나 이론의 정식화가 유한요소법에 비해 상당히 어려운 점은 있으나 무요소법은 요소의 정보를 필요치 않으므로 사용자 입장에서는 매우 편리할 것이다. 앞으로 경계조건을 효과적으로 만족시키는 문제를 해결하고 효과적인 알고리즘이 개발된다면 실용적으로 유한요소법을 대신할 수 있는 좋은 대안이 될 수 있을 것이라 생각된다.
This study is to investigate the effect of some physical properties of soil on the compaction. The compaction effect depends upon various factors such as soil type, moisture content, gradation and compaction energy. In this study, with steady compaction energy, the relationships between maximum dry density and moisture content, gradation and consistency were analyzed by soil types. Some results obtained in this study are summarized as follows 1. Generally, the coarser the grain size, the bigger is the maximum dry density and the smaller is the optimum moisture content and its moisture-dry denisty curve is relatively steep. The finner the grain size, the smaller is the max. dry density and the bigger is the opt. moisture content and its moisture-dry density curve is less steep. 2. The relationship between max. dry density (${\gamma}$dmax) and opt. moisture content, void ratio, clay content, percent passing of No. 200 sieve, liquid limit and plastic limit can be represented by the equation ${\gamma}$dmax =ao+a1X(a0>0, a1<0) 3. The relationship between opt. moisture content (Wopt) and clay content, percent passing of No. 200 sieve, liquid limit and plastic limit can be represented by the equation Wopt=a0+a1X(a0>0, al>0). 4. The fact that maximum dry density of the compacted soil is decreased with the increase of the optimum moisture content in any types of soil tested, and the fact that optimum moisture content can be positively correlated with clay content, percent passing of No. 200 sieve, liquid limit and plastic limit of the soil, lead to the conclusion that clay content, percent passing of No. 200 sieve, liquid limit and plastic limit of the soil are direct factors in reduction of the maximum dry density of engineering soil.
PURPOSE. The aim of this clinical study was to assess the accuracy of the implants placed using a universal digital surgical guide. MATERIALS AND METHODS. Among 17 patients, 28 posterior implants were included in this study. The digital image of the soft tissue acquired from cast scan and hard tissue from CBCT have been superimposed and planned the location, length, diameter of the implant fixture. Then digital surgical guides were created using 3D printer. Each of angle deviations, coronal, apical, depth deviations of planned and actually placed implants were calculated using CBCT scans and casts. To compare implant positioning errors by CBCT scans and plaster casts, data were analyzed with independent samples t-test. RESULTS. The results of the implant positioning errors calculated by CBCT and casts were as follows. The means for CBCT analyses were: angle deviation: $4.74{\pm}2.06^{\circ}$, coronal deviation: $1.37{\pm}0.80mm$, and apical deviation: $1.77{\pm}0.86mm$. The means for cast analyses were: angle deviation: $2.43{\pm}1.13^{\circ}$, coronal deviation: $0.82{\pm}0.44mm$, apical deviation: $1.19{\pm}0.46mm$, and depth deviation: $0.03{\pm}0.65mm$. There were statistically significant differences between the deviations of CBCT scans and cast. CONCLUSION. The model analysis showed lower deviation value comparing the CBCT analysis. The angle and length deviation value of the universal digital guide stent were accepted clinically.
Objective : To investigate the morphological and hemodynamic parameters associated with middle cerebral artery (MCA) bifurcation aneurysm rupture. Methods : A retrospective study of 67 consecutive patients was carried out based on 3D digital subtraction angiography data. Morphological and hemodynamic parameters including aneurysm size parameters (dome width, height, and perpendicular height), longest dimension from the aneurysm neck to the dome tip, neck width, aneurysm area, aspect ratio, Longest dimension from the aneurysm neck to the dome tip (Dmax) to dome width, and height-width, Bottleneck factor, as well as wall shear stress (WSS), low WSS area (LSA), percentage of LSA (LSA%) and energy loss (EL) were estimated. Parameters between ruptured and un-ruptured groups were analyzed. Receiver operating characteristics were generated to check prediction performance of all significant variables. Results : Sixty-seven patients with MCA bifurcation aneurysm were included (31 unruptured, 36 ruptured). Dmax (p=0.008) was greater in ruptured group than that in un-ruptured group. D/W (p<0.001) and the percentage of the low WSS area ($0.09{\pm}0.13$ vs. $0.01{\pm}0.03$, p<0.001) were also greater in the ruptured group. Moreover, the EL in ruptured group was higher than that in unruptured group ($6.39{\pm}5.04$ vs. $1.53{\pm}0.86$, p<0.001). Multivariate regression analysis suggested D/W and EL were significant predictors of rupture of MCA bifurcation aneurysms. Correlation analyses revealed the D/W value was positively associated with the EL (R=0.442, p<0.01). Conclusion : D/W and EL might be the most two favorable factors to predict rupture risk of MCA bifurcation aneurysms.
목적: 본 연구의 목적은 디지털 소프트웨어를 이용하여 제작된 수술용 스텐트를 이용하여 지지 형태에 따른 수술용 스텐트의 정확성을 분석하는 것이다. 재료 및 방법: 총 5세트의 치아모형에 대하여 양측에 지대치가 있는 치아지지형 무치악 모델과 근심에만 지대치가 있는 치아-조직 지지형 무치악 모델을 제작하였다. 모델을 스캐닝을 시행하고, 전산화 단층 촬영을 실시하여 In2Guide 소프트웨어를 이용하여 전산화 단층 촬영술의 정보와 모델 스캐닝 정보를 중첩하여 임플란트 고정체(USII, $4{\times}10mm$, Osstem, Seoul, Korea)에 대한 가상적인 위치배열을 실시하고 수술용 스텐트 제작하였다. DMAX 수술 키트을 사용하여 임플란트 고정체를 식립하였다. 식립후 전산화 단층 촬영을 실시하여 찍어 술전에 계획된 임플란트와 실제 식립된 임플란트 사이에 오차(angle difference, coronal difference, apical difference)를 측정하여 통계분석을 시행하였다. 결과: 악궁에 따른 정확도 결과에서 하악이 전반적으로 각도, 길이오차의 값이 작게 나타났으나 이는 통계적 유의성이 없었다. 스텐트의 지지 형태에 따른 정확도 결과에서 치아지지형 스텐트가 치아-조직지지형 스텐트보다 길이오차와 각도오차의 값이 통계적으로 유의하게 작은 값을 보였다. 결론: 악궁(상악, 하악)은 수술용 스텐트의 정확도에 영향을 미치지 않았으며, 치아 지지형 스텐트는 치아-조직지지형 스텐트보다 더 적은 오차를 보여 주었다.
본 논문은 정규압밀된 점성토 지반에서 강관 매입 말뚝의 수평 거동에 영향을 미치는 여러인자들 중에서 말뚝의 근입길이, 지반조건(건조단위 중량 $\gamma_4$), 말뚝 두부의 구속조건의 영향에 관하여 모형실험을 수행하였으며, 이러한 영향을 정량화 할 수 있는 경첩식을 그 결과들로부터 얻었다. 모형실험에 사용한 지반은 3종류의 정규압밀 점토이다. 2종류의 말뚝 근입길이와 말뚝 두부의 고정 자유조건의 모형실험결과들에 의하여 수평하중-변위 관계는 $\gamma_d/\gamma_{dmax}$=0.84 이하에서 완전 탄소성체의 거동형상을 보일 것으로 나타났으며, 각 실험에서 최대 수평하중(Q--) 이후의 수평하중 감소는 상당한 시간 의존성을 보였다. 본 연구에서는 수평 하중-변위관계(logo-logy/D)와 최대 휨 모멘트-변위관계($loaM_{max}$.-.-logy/D)에서 각각 구한 항복 수평하중(Qy)과 항복 최대 휭 모멘트(My)가 직선적인 관계로 밝혀졌다. Relaxation에 의한 수평하 중은 모형실험 결과들로부터 시간을 변수로 한 지수 함수식으로 회귀분석 하였다. 수평 극한하중과 항복하중에 대한 지반조건의 영향은 $\gamma_4$$/\gamma_{dmax}$의 변수로 한 지수함수식으로 모델화 하였으며, Broms와 Budhu et at.에 의한 결과와의 비교에서 예측결과가 26-78%정도 과대평가 되었다. 수평하중-변위 관계에 대한 말뚝 두부의 고정조건 영향에서 $Q_{mxed}/Q_{free}$-y/D의 관계는 상당히 비선형적으로 나타났으며, yiD를 변수로 한 지수함수식으로 모델화하였다.
The field size can be beam output, therefore MonitorUnit can be varied due to field size dependence The purpose of this study is to evaluate and compare the dose variation according to exchange of collimator The measurements were perfomed with Wellhofer dosimetry system(water phantom. ion chamber. electrometer. system controller. build up cap. etc)and two types of linear accerlerator (Mevatron KD, MevatronMX) Scatter can be affected to field size dependence and scatter correction is separated into collimator and phantom components, scatter components can affect by exchanging of collimator Measurements of collimator scatter factor(Sc) was done in air with build up cap. 1)Square field (5cm2 to 40cm2) was measured 2)and then keeping the upper jaw constant at loom and varing lower jaw from 5cm to 40cm, 3)keeping the lower jaw constant at 10cm and varing upper jaw from 5cm to 40cm Measurements of total scatter factor(Scp) was done in water at Dmax as the procedure of collimator scatter factor measurements in water Dmax The total scatter factors were obtained to the following equation(Sp=Scp/Sc) The measured data is normalized to the data of reference field size($10{\times}10$), rectangular field is inverted to equivalent field to compare three field size data As the collimator setting is varied, the output was changed In conclusion, the error was obtained small but it must be eliminated if we intend to reach the common stated goal of $5\%$ overall uncertainty in dose determination
3D virual reality technique develop rapidly such as parts of education, health, national defense, etc. This paper implements an education contents utilizing 3D virtual reality based on HMD. In this paper, contents make up Changdeokgung Palace using to 3Dmax and Unity program, it shows on implemented Helmet Mounted Display. HMD obtain dynamic image from the target source of smart phone. Also, contents consist of service senerio through divided palace position and King's a day's journey especially. Above all, this paper indicate improving performance according to reduced cybersickness and immersion enlargement. And memory capacity reduced by various technique such that file type, compressed file, minimized resource. Proposed technique can obtain dynamic 3D image by HMD implementation at real time basis so that it is possible to use simultaneously multi-source. From the various and practical experiment, it is confirm that proposed 3D VR education system is useful for experience of virtual reality practically.
본 연구에서는 어린이들이 따분하고 어렵게 느낄 수 있는 재활용 교육 방식을 지양하고, 재활용품의 수집 및 분류 그리고 재활용 공정을 자연스럽게 체험할 수 있도록 하기 위해 어린이들의 흥미를 유발시키고 과학적인 호기심을 충족시키는 방식으로 3DMax와 DirectX를 이용하여 3차원 재활용 레이싱 게임을 개발한다. 결과적으로, 재활용 관련 전시관에서 어린이들이 직접 사용해 볼 수 있는 자료로 활용되거나 교육기관 및 관련 관공서에서 홍보 및 교육용 매체로 활용될 수 있을 것으로 기대된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.