• 대한전자공학회논문지
• /
• 제27권12호
• /
• pp.1865-1869
• /
• 1990

N-Channel polysilicon MOSFETs (W/L=20/1.5, 3, 5.10\ulcorner) were fabricated using RTP (Rapid Thermal Processor) and hydrogen passivation. The N+ source, drain and gate were annealed and recrystallized using RTP at temperature of 1000\ulcorner-1100\ulcorner. But the active areas were not specially crystallized before growing the gate oxide. Without the hydrogen passivarion, excellent transistor characteristics (ON/OFF=5.10**6, S=85MV/DEC, IL=51pA/\ulcorner) were obtained for 1.5\ulcorner MOSFET. Also the transistor characteristics were improved by hydrogen passivation.

• 대한방사선기술학회지:방사선기술과학
• /
• 제19권1호
• /
• pp.51-54
• /
• 1996

This study was conducted to find out the indoor radon concentrations from Jan. 1, to Dec. 31, 1995 in Seoul, and the following results were achieved; 1. The average concentration of indoor radon ranged from $0.51pCi/\ell$ to $0.78pCi/\ell$. 2. The correlation coefficients(r) of radon concentration and indoor meteorological conditions were as follows; 1) temperature : r=0.11 2) atmospheric pressure : r= -0.01 3) humidity : r=0.227.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.543-545
• /
• 2009

With injection-type source delivery system of atomic layer deposition (ALD), bottom-contact and bottom-gate thin-film transistors (TFTs) were fabricated with a poly-4-vinyphenol polymeric dielectric for the first time. The properties of the ZnO TFT were greatly influenced by the device structure and the process conditions. The zinc oxide TFTs exhibited a channel mobility of 0.43 $cm^2$/Vs, a threshold voltage of 0.85 V, a subthreshold slope of 3.30 V/dec, and an on-to-off current ratio of above $10^6$ with solid saturation.

• 전자통신동향분석
• /
• 제6권3호
• /
• pp.187-202
• /
• 1991

CAD 프레임워크는 다양한 CAD 툴들의 이용법을 사용자 관점에서 통합하여 사용의 편이성과 설계 작업의 생산성을 높이고 CAD 시스팀 관리의 효율성을 높이고자 창안된 개념이다. 본 고에서는 CAD 프레임워크의 개념과 기능, 구성과 DEC 의 Power Frame을 예로 한 프레임워크의 형태와 발전 현황, 그리고 표준화 동향과 제 4세대 프레임워크를 중심으로 한 앞으로의 전망에 대해 살펴본다.

• 한국학교보건학회지
• /
• 제23권1호
• /
• pp.1-10
• /
• 2010

Purpose: The purpose of this study was to investigate factors influencing health promoting behavior of the late school age children and to analyze the difference of health promoting behavior according to personal factors of children. Methods: The subjects consisted of 169 school-aged children in the 6th grade in Gyeonggi-do. Data were collected from Dec. 1 to Dec. 10, 2008. The data were analyzed by using frequency, percentage, mean, standard deviation, t-test, ANOVA, Pearson's correlation coefficients and Stepwise multiple regression with the SPSS/WIN 12.0 program. Results: 1) Health promoting behavior was proved to be relatively high. The average item score for the health promoting behavior was $3.85{\pm}.41$. The highest degree of health promoting behavior was stress management (4.13). whereas the one with the lowest degree was exercise (3.40). 2) In the relationship between personal factors and health promoting behavior, there were statistically significant differences in gender, perceived health status, family mood, father's drinking habits, school performance, school satisfaction. 3) Health promoting behavior was showed significant positive correlations with perceived self-efficacy (r=.55), social support (r=.65), prior related behaviors (r=.44), perceived benefits of action (r=.42), and significant negative correlations with perceived barriers of action (r=-.37). 4) Stepwise multiple regression analysis was revealed that the most powerful predictor of health promoting behavior was social support ($\beta$=0.36) Conclusion: The combination of social support, perceived self-efficacy, perceived benefits of action, gender, and family mood accounted for 57.8% of the variance in the health promoting behavior of the late school age children.

• Structural Monitoring and Maintenance
• /
• 제4권1호
• /
• pp.17-31
• /
• 2017

Since extensometers are used to determine the absolute deformation of foundation and abutments and all results are obtained in reference to the base rod, the accuracy of these results has been constantly a subject of debate. In this regard, locating and installing extensometers outside the range of effect zone is also another challenge. The main purpose of this paper is to investigate and modify extensometers results based on the mentioned issues. For this aim, the concrete RCC Zhaveh dam in Iran was selected as the case study. To study the results of extensometers installed in this dam, first, the 3DEC_DP 5.00 software was applied for numerical modeling. Parameters such as discontinuities, dead load and piezometric pressure in the interface of concrete and rock were considered. Next, using the results obtained from 6 extensometers in foundation and abutments and 4 clinometers in dam body, the numerical model was calibrated through back analysis method. The results indicate that the base rod is moved and is not recommended being used as the base point. In other words, because installation of base anchor outside the range of effect zone is not possible due to the operational and economic considerations, the obtained results are not accurate enough. The results indicate a considerable 2-3 mm displacement of the base rod (location of the base anchor) in reference to the real zero point location, which must be added to the base rod results.

• 한국의상디자인학회지
• /
• 제24권3호
• /
• pp.1-15
• /
• 2022

The purpose of this study is to compare and analyze the perception of men's fashion before and after the COVID-19 pandemic. TEXTOM allowed the collection of Big Data based on the term 'men's fashion'. As for the data collection periods, Jan. 1, 2018 to Dec. 31, 2019 was set as the pre-COVID-19 era, while Jan. 1, 2020 to Dec. 31, 2021 was set as the post-COVID-19 era. The top 50 words in terms of appearance frequency were extracted from the data. The extracted words were processed using network centrality analysis and CONCOR analysis using Ucinet 6. Research findings were as follows. 1) In the pre-COVID-19 era, the appearance frequency of 'men' was the highest, followed by 'fashion', 'men's fashion', 'brand', 'daily look', 'suit', and 'department store'. These words came up with a high TF-IDF values. Network centrality analysis discovered that 'men', 'fashion', 'men's fashion', 'brand', and 'suit' had a high level of connectivity with other words. CONCOR analysis showed four significant groups: 'fashion item and styles', 'fashion show', 'purchase', and 'collection'. 2) In the post-COVID-19 era, the appearance frequency of 'men' was the highest, followed by 'fashion', 'brand', 'men's fashion', 'discount', 'women', and 'luxury'. These words also displayed high TF-IDF values. Network centrality analysis found that 'fashion', 'men', 'brand', 'men's fashion', and 'discount' had a high level of connectivity with other words. CONCOR analysis showed four significant groups: 'fashion item and style', 'fashion show', 'purchase', and 'situation'. 3) Before the outbreak of the pandemic, men were interested in suits to wear to the office, daily look, and fashion shows in Milan and Paris. They often purchased menswear in multi-brand and open stores. However, they were more interested in sneakers, casual styles, and online fashion shows as social distancing and working from home became common. Most purchased menswear through online platforms.

• 전기화학회지
• /
• 제4권3호
• /
• pp.113-117
• /
• 2001

탄소계 전극을 사용하는 EDLC(Electric Double Layer Capacitor)용의 축전용량과 충방전속도는 전해질의 종류, 충방전 조건 그리고 탄소계 물질의 물리화학적 성질에 따라 크게 달라질 수 있다. 이에 본 연구에서는 dip coating method에 의해 제조된 EDLC용 활성탄소 전극에서 유기 전해질의 종류를 달리하여 충방전 실험과 전기화학적인 실험을 시행하였다. 또한 충전전류밀도와 방전전류밀도의 변화에 따른 비축전 용량의 변화를 조사하였고, 최적 유기전해질의 조건에서 leakage current 특성, 자가방전 특성 그리고 시간전압곡선을 기존의 $1M-Et_4NBF_4/PC$와 비교하였다 활성탄, 소전극으로 비표면적이 $2000m^2/g$인 MSP-20을 사용하고 유기전해질로는 $1M-LiPF_6/PC-DEC(1:1)$를 사용한 EDLC에서 130 F/g 정도의 우수한 비축전 용량을 나타내었고 저항면에서도 가장 낮은 수치를 나타내었다 $1M-LiPF_6/PCDEC(1:1)$를 사용한 EDLC는 15분동안 0.0004A의 낮은 leakage current와 100시간 경과 후 0.8V의 우수한 자가 방전 특성 그리고 IR-drop이 적은 선형의 시간-전압곡선을 보여주었다.

• 약학회지
• /
• 제27권1호
• /
• pp.29-36
• /
• 1983

Shogaol, one of the main pungent principles of the rhizome of Zingiber officinale, Roscoe, was biodegraded by Aspergillus niger to produce two main metabolites. The crystalline metabolite obtained after silicic acid column chromatography was proved to be 1-(4-hydroxy-3- methoxyphenyl)decan-10-ol-3-one. The oily metabolite obtained after prolonged fermentation was 1-(4-hydroxy-3-methoxyphenyl)-decan-3, 10-diol. The results suggest that shogaol should be biodegraded to 1-(4-hydroxy-3-methoxyphenyl)-dec-4-en-10-ol-3-one or to 1-(4-hydroxy-3-methoxyphenyl)-decan-3-one, and to 1-(4-hydroxy-3-methoxyphenyl)-decan-10-ol-3-one then to 1-(4-hydroxy-3-methoxyphenyl)-decan-3, 10-diol and finally to carbon dioxide and water.

• Geomechanics and Engineering
• /
• 제14권6호
• /
• pp.545-552
• /
• 2018

Blast-induced ground vibrations by a significant amount of explosives may cause many problems for mining slope stability. Geological discontinuities have a significant influence on the transmission of dynamic pressure of detonation and according to their position relative to the slope face may have damaging or useful impacts on the slope stability. In this study, the effect of geological discontinuities was investigated by modelling a slope with geological discontinuities through applying the dynamic pressure in three-dimensional discrete element code (3DEC). The geological discontinuities in four states that generally apperceived in mine slopes are considered. Given the advantages of the pressure decay function defined by some researcher, this type of function was used to develop the pressure-time profile. The peak particle velocities (PPV) values were monitored along an axis by utilization of Fish programming language and the results were used as an indicator to measure the effects. As shown in the discontinuity-free model, PPV empirical models are reliable in rocks lacking discontinuities or tightly jointed rock masses. According to the other results, the empirical models cannot be used for the case where the rock mass contains discontinuities with any direction or dip. With regard to PPVs, when the direction of discontinuities is opposite to that of the slope face, the dynamic pressure of detonation is significantly damped toward the slope direction at the surface of discontinuities. On the other hand, when the discontinuities are horizontal, the dynamic pressure of detonation affects the rock mass to a large distance.