• Journal of Forest and Environmental Science
• /
• 제8권1호
• /
• pp.51-66
• /
• 1992

This study was carried out to investigate the micromorphology of vessel wall sculpture such as shape of perforation plate, perforation rim, steepness of perforation plate, occurrence of vestured pit, warty layer and ray-vessel pitting on 13 species of Fagaceae in Korea. The results were summarized as follows ; 1. In the species examined, all sample species except Fagus crenata var. multinervis have simple perforation plate. But Fagus crenata var. multinervis has simple and scalariform perforation plate (it was called to combination perforation plate) in a tree stem. 2. The shapes of perforation rim could be classified into five types; Type A without tail, Type B with small tail on both sides, Type C with long tail on both sides, Type D with tail only one side and Type E with the very short interval between perforations. Among five types, Type Band C have higer frequency of distribution than the others. 3. The steepness of perforation plate measured was about 20 degree on pore zone and 43 degree on outside parts of pore zone. 4. Species with vestured pit were Q. aliena, Q, dentata, Q. variabilis, Fagus crenata var. multinervis, Castanopsis cuspidata var sieboldii, Q. acuta, Q. stenophylla, and Q. glauca. But the extent of vesturing was very slight and vestured pits were observed mainly in ray-vessel pit of some vessel elements. 5. Species with warty layer on the inner surface wall of all vessel elements were Q. acuta, Q. stenophylla, Q. glauca, Fagus crenata var. multinervis and species with warty layer of some vessel elements were Q. aliena, Q, dentata, Q. variabilis, Castanopsis cuspidata var. sieboldii. 6. Species with palisade ray-vessel pit were Q. acuta, Q. stenophylla, Q. glauca, Castanea crenata, Castanea bungeana, Q. aliena, Q. serrata, Q. mongolica, and species with scalariform ray-vessel pit was Fagus crenata var. multinervis and species with oval ray-vessel pit were Q, dentata, Castanopsis cuspidata var sieboldii.

• 선박안전
• /
• 통권23호
• /
• pp.51-64
• /
• 2007

Main concern of this subject is "hat type of hull shape is most important for building aluminum fishing vessel and suitable for domestic fisherman." For the this subject, We research from traditional hull shape of fiberglass fishing vessel and supply to our domestic fisherman with 3D render images. Following the above job making with concept design and basic drawing for product model. And most important research job with technical of aluminum vessel and products system and standard of job description. We filled two category with design and products for our domestic fisherman.

• 전기전자학회논문지
• /
• 제24권4호
• /
• pp.1176-1179
• /
• 2020

선박의 이동 경로를 예측하는 기존의 방법들은 일반적으로 위도와 경도를 직접 예측한다. 하지만, 위도와 경도를 직접 예측할 경우, 예측 모델이 출력 가능한 범위가 상당히 넓어서 예측 오차가 매우 크게 발생할 수 있다. 또한, 순환 신경망 모델 기반의 예측에서는 이전 예측 위치도 다음 위치를 예측하기 위해 사용되기 때문에 오차가 누적되는 현상도 쉽게 발생할 수 있다. 이에 따라, 제안하는 방법에서는 위도와 경도를 직접 예측하지 않고, 선박의 가속도를 예측하여, 향후 속도와 방향을 결정하고, 그 결과로 위도와 경도가 예측되는 방법을 제안한다. 실험 결과에서는 같은 순환 신경망 모델을 사용했을 때, 제안하는 방법이 기존의 직접적으로 위도와 경도를 예측하는 방법에 비해 더 적은 오차를 발생시킴을 보인다.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.160-167
• /
• 2012

This paper is concerned with a particular fracture mechanics parameter ${\Delta}K_{th}$, known as the 'threshold stress intensity range', or 'fatigue threshold'. This threshold ${\Delta}K_{th}$ constitutes, as it were, a hinge between the notion of crack initiation and the notion of crack growth. It has often been thought that, like the endurance limit, it could be an intrinsic criterion of the material. The study was conducted on a SA-508 pressure vessel steel used in the nuclear power industry. This material exhibits a typical threshold effect in the range of the crack growth rates which were determined; that is, below approximately $da/dN=10^{-6}mm/cycle$, the slope of the da./dN versus ${\Delta}K$ curve is almost vertical. The value of ${\Delta}K_{th}$ was determined at a growth rate of $10^{-7}$ mm/cycle according to the ASTM Standard for threshold testing. The fatigue threshold values are in the range 21 $kg/mm^{3/2}$ to 12 $kg/mm^{3/2}$ depending on the stress ratio effect.

• 한국추진공학회지
• /
• 제22권3호
• /
• pp.21-27
• /
• 2018

본 연구에서는 복합재 압력용기의 성능지수를 최대화하기 위한 적층 설계변수의 영향도 평가 및 최적설계를 수행하였다. 성능지수를 최대화하기 위하여 압력용기의 내부체적이 고정되어 있다는 가정 하에 헬리컬 및 후프 층의 두께와 후프 층의 길이, 총 세 가지 변수를 고려하였다. 선정된 변수들의 최적화를 위하여 대체모델의 구축에 필요한 반응표면법이 도입되었고, 변수의 영향도를 평가하기 위한 분산분석이 수행되었다. 최적설계 문제는 내압성능 제약조건 하에 성능지수를 최대화하는 문제로 정식화하였다. 도출된 최적화 모델에 대한 추가적인 수치해석을 통해 본 연구의 효용성을 입증하였다.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3567-3579
• /
• 2022

This paper provides an assessment of fluid transport and mixing processes inside the primary circuit of the test facility ROCOM through the numerical simulation of Test 2.1 with the system code ATHLET. The experiment represents an asymmetric injection of cold and non-borated water into the reactor coolant system (RCS) of a pressurized water reactor (PWR) to restore core cooling, an emergency procedure which may subsequently trigger a core re-criticality. The injection takes place at low velocity under single-phase subcooled conditions and presents a major challenge for the simulation in lumped parameter codes, due to multidimensional effects in horizontal piping and vessel arising from density gradients and gravity forces. Aiming at further validating ATHLET 3-D capabilities against horizontal geometries, the experiment conditions are applied to a ROCOM model, which includes a newly developed horizontal pipe object to enhance code prediction inside coolant loops. The obtained results show code strong simulation capabilities to represent multidimensional flows. Enhanced prediction is observed at the vessel inlet compared to traditional 1-D approach, whereas mixing overprediction from the descending denser plume is observed at the upper-half downcomer region, which leads to eventual deviations at the core inlet.

• 한국정보전자통신기술학회논문지
• /
• 제9권2호
• /
• pp.196-204
• /
• 2016

세계보건기구협회에의 통계에 따르면 심장 혈관 질환의 발병률이 가장 높은 것으로 알려져 있다. CTA영상을 사용하여 관상동맥 및 대동맥 질환을 치료 및 검사할 수 있다. 혈관을 3차원으로 복원하는 과정이 의사의 숙련도에 따라 결과가 상이하며 복원 시간이 길다는 단점이 있으며 이를 극복하고자 자동으로 정확한 혈관을 추출하는 연구들이 진행되어 왔다. 본 논문에서는 자동 및 반자동 분할 기법인 Region Competition, Geodesic Active Contour(GAC), Multi-atlas based segmentation, Active Shape Model(ASM) 알고리즘을 CTA영상에 적용하여 대동맥 기부를 추출하였으며 하우스도르프 거리, 볼륨, 영상처리속도, 사용자 관여 여부, 그리고 관상동맥 심문 검출률을 비교 및 분석하였다. 추출된 3차원 대동맥 모델 중 가장 높은 정확도를 나타낸 알고리즘은 GAC인 반면 사용자 관여가 가장 높았기 때문에 실제 시술에 적용하기 위해서는 자동 분할 알고리즘 개선이 필요하다

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권1호
• /
• pp.583-587
• /
• 2013

This study aimed to investigate tumor microvessel density (MVD) and lymphatic vessel density (LVD) using the Chalkley method as predictive markers for the risk of axillary lymph node metastasis and their relationship to other clinicopathological parameters in primary breast cancer cases. Forty two node-positive and eighty node-negative breast cancers were immunostained for CD34 and D2-40. MVD and LVD were counted by the Chalkley method at x400 magnification. There was a positive significant correlation of the MVD with the tumor size, coexisting ductal carcinoma in situ (DCIS) and lymph node metastases (P<0.05). In multivariate analysis, the MVD (2.86-4: OR 5.87 95%CI 1.05-32; >4: OR 20.03 95%CI 3.47-115.55), lymphovascular invasion (OR 3.46, 95% CI 1.13-10.58), and associated DCIS (OR 3.1, 95%CI 1.04-9.23) independently predicted axillary lymph node metastasis. There was no significant relationship between LVD and axillary lymph node metastasis. However, D2-40 was a good lymphatic vessel marker to enhance the detection of lymphatic invasion compared to H and E staining. In conclusion, MVD by the Chalkley method, lymphovascular invasion and associated DCIS can be additional predictive factors for axillary lymph node metastases in breast cancer. No relationship was identified between LVD and clinicopathological variables, including axillary lymph node metastasis.

• 대한의용생체공학회:의공학회지
• /
• 제16권3호
• /
• pp.289-300
• /
• 1995

지금까지는 혈관의 중심선을 구해서 혈관의 직경을 측정해 왔다. 혈관의 중심선을 구하는 방법은 2가지가 보고되어 있는데 그중 하나는 maunal로 중심선을 찾는 observer-defined 방법이다. 이 방법을 사용자에 따라 변화할 가능성이 잠재한다, 또 다른 방법은 자동으로 혈관의 중심을 찾아내는 것인데 대단히 복잡하다. 이 논문에서, 중심선을 찾지 않고 방향코드와 위치정보를 이용하여 직경을 구하는 새로운 방법을 제안한다. 이 방법은 경계선과 방향코드를 동시에 검출하기 때문에 절차가 간단해지고 처리속도도 빨라진다. 중앙선을 이용하여 자동으로 혈관직경을 구하는 방법과 비교해보면, 가지가 있거나 장애가 있는 혈관 이미지에 있어서 정확도가 개선된다. 또한 방향 코드는 3비트로 코드화되기 때문에 혈관정보를 압축 저장하는데 용이하다. 이 방법은 실험을 통하여 유용성이 있음을 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제21권4호
• /
• pp.249-257
• /
• 2010

In this paper, a three-dimensional hydrogen absorption model is developed to precisely study hydrogen absorption reaction and resultant heat and mass transport phenomena in metal hydride hydrogen storage vessels. The 3D model is first experimentally validated against the temperature evolution data available in the literature. In addition to model validation, the detailed simulation results shows that at the initial absorption stage, the vessel temperature and H/M ratio distributions are uniform throughout the entire vessel, indicating that the hydrogen absorption is so efficient during the early hydriding process and thus local cooling effect is not influential. On the other hand, nonuniform distributions are predicted at the latter absorption stage, which is mainly due to different degrees of cooling between the vessel wall and core regions. This numerical study provides the fundamental understanding of detailed heat and mass transfer phenomena during hydrogen absorption process and further indicates that efficient design of storage vessel and cooling system is critical to achieve fast hydrogen charging and high hydrogen storage efficiency.