• Current Optics and Photonics
• /
• 제8권3호
• /
• pp.307-312
• /
• 2024

Measuring the three-dimensional (3D) spatial light intensity distribution of an autostereoscopic multiview 3D display at the user position is time-consuming, as luminance has to be measured at different positions around the user position. This study investigates a method to quickly estimate the 3D distribution at the user position. For this purpose, a measurement setup using a white semitransparent diffusing screen or a two-dimensional (2D) spatial sensor was devised to measure the 2D light intensity distribution at the user position. Furthermore, the 3D spatial light intensity distribution at the user position was estimated from these 2D distributions at different viewing distances. From the estimated 3D distribution, the characteristics of autostereoscopic 3D display performance can be derived and the candidate positions for further accurate measurement can be quickly determined.

• 지반과기술
• /
• 제3권3호
• /
• pp.15-22
• /
• 2006

The optimum blasting pattern to excavate a quarry efficiently and economically can be determined based on the minimum production cost, which is generally estimated according to rock fragmentation. Therefore, it is a critical problem to predict fragment size distribution of blasted rocks over an entire quarry. By comparing various prediction models, it can be ascertained that the result obtained from Kuz-Ram model relatively coincides with that of field measurements. Kuz-Ram model uses the concept of rock factor to signify conditions of rock mass such as block size, rock jointing, strength and others. For the evaluation of total production cost, it is imperative to estimate 3-D spatial distribution of rock factor for the entire quarry. In this study, a sequential indicator simulation technique is adopted for estimation of spatial distribution of rock factor due to its higher reproducibility of spatial variability and distribution models than Kriging methods. Further, this can reduce the uncertainty of predictor using distribution information of sample data. The entire quarry is classified into three types of rock mass and optimum blasting pattern is proposed for each type based on 3-D spatial distribution of rock factor. In addition, plane maps of rock factor distribution for each ground level are provided to estimate production costs for each process and to make a plan for an optimum blasting pattern.

• 국제초고층학회논문집
• /
• 제5권2호
• /
• pp.95-103
• /
• 2016

One of the key problems in the design of high-rise commercial complex is how to guide reasonable pedestrian distribution in commercial space. In this study, pedestrian distribution in three high-rise commercial complexes in Shanghai and Hong Kong was studied using spatial configuration analysis software Space Syntax and quantification of physical elements in commercial spaces, such as functional attractiveness, entrances, escalators, level variations and passage width. Additionally, in an attempt to integrate functions with spatial integration and spatial depth, two combination variables, the spatial coefficient of function (IF) and spatial depth coefficient of function (F/D), were proposed. The results of the correlation analysis and multiple regression analyses reflected the following: (1) Regarding the influence on pedestrian distribution, there was a synergistic and complementary relationship between function and space; (2) The comprehensive flow distribution analytic model could successfully interpret flow distribution in high-rise commercial complexes and its R Square ranged up to about 70% in the three cases; (3) The spatial coefficient of function (IF) and spatial depth coefficient (F/D) could effectively integrate functions and spatial configuration, which could help close the gap between over-emphasis on function in commercial research and the lack of consideration of function in space-syntax analysis.

• 에너지공학
• /
• 제22권2호
• /
• pp.156-168
• /
• 2013

이 연구에서는 2007년, 2010년에 수행한 울릉분지 1, 2차 시추 지역의 시추공(UBGH1-1, UBGH1-4, UBGH1-9, UBGH1-10, UBGH1-14, UBGH2-2-1, UBGH2-2-2, UBGH2-6, UBGH2-9, UBGH2-10, UBGH2-11)에서 취득한 물리검층 및 코어분석 자료로 추정한 가스하이드레이트 함유층 주요 물성 자료를 활용하여 불균질성을 반영할 격자 수준의 3차원 공간 분포 모델링을 수행하였다. 가스하이드레이트 함유층 내 퇴적상의 공간 분포 추정을 위하여 퇴적상 추정 자료를 각 시추공별로 3차원 격자셀에 입력하고 순차지표시뮬레이션으로 3차원 분포를 모델링하였다. 가스하이드레이트 함유층의 공극률과 가스하이드레이트포화율은 퇴적상 분포 모델을 기반으로 순차가우스시뮬레이션을 통해 3차원 공간 물성 분포를 추정하였다.

• 동력기계공학회지
• /
• 제14권3호
• /
• pp.5-12
• /
• 2010

The purpose of this study is to analyze heterogeneous distribution of branch-like structure at downstream region of inner spray. The previous many studies about diesel spray structure have yet stayed in the analysis of 2-D structure, and there are very few of informations which are concerned with 3-D analysis of the structure. The heterogeneous distribution of droplets in inner spray affects the mixture formation of diesel spray, and also the combustion characteristics of the diesel engines. Therefore, in order to investigate 3-D structure of evaporative spray the laser beam of 2-D plane was used in this study. Liquid fuel was injected from a single-hole nozzle (l/d=5) into a constant-volume vessel under high pressure and temperature in order to visualize the spray phenomena. The incident laser beam was offset on the central axis. From the images analysis taken by offset of laser beam, we examine formation mechanism of heterogeneous distribution by vortex flow at the downstream of the diesel spray. As the experimental results, the branch-like structure formed heterogeneous distribution of the droplets consists of high concentration of vapor phase in the periphery of droplets and spray tip of branch-like structure. Also the 3-D spatial structure of the evaporative diesel spray can be verified by images obtained from 2-D measurement methods.

• 한국지리정보학회지
• /
• 제15권4호
• /
• pp.162-174
• /
• 2012

공간적으로 3차원의 특성을 지닌 해양에서 수직적인 수온 자료의 특성을 가시화하기 위해서는 각 수심층별 수평 수온분포도와 같은 2차원적 주제도나 3차원적 공간보간을 통한 입체 모델을 사용하게 된다. 이러한 방법은 해양 현상을 시각적으로 이해하는데 유용하지만, 수직적 수온분포의 공간 패턴 분석이나 수직적 수온의 특성과 다른 해양 요인(해양화학, 해양생물, 기후변화 등)과의 관계분석에는 한계가 있다. 따라서 본 연구는 수온 수직구조의 주요 파라미터인 혼합층의 깊이, 최대수온구배, 수온약층의 두께를 추출하는 알고리즘을 이용하여, 수온의 수직구조 특성을 정량화함으로써 제주남부 해역의 수온 수직구조의 공간분포 특성을 밝히고자 한다. 이를 위해 수온 수직구조를 대표하는 세 가지 파라미터에 대한 공간분포지도 제작을 비롯해 공간자기상관 지수(Moran's I)를 계산하였다. 아울러, 세 가지 파라미터에 대한 군집분석을 수행하여 제주 남부해역을 4개 지역으로 그룹핑하고, 각 지역에 대한 수직 수온구조의 특성을 정의하였다.

• 한국측량학회지
• /
• 제38권2호
• /
• pp.141-151
• /
• 2020

Since it was first studied in 1980, solar energy analysis model for geographic information systems has been used to determine the approximate spatial distribution of terrain. However, the spatial pattern was not able to be grasped in 3D (three-dimensional) space with low accuracy due to the limitation of input data. Because of computational efficiency, using a constant value for the brightness of the sky caused the simulation results to be less reliable especially when the slope is high or buildings are crowded around. For the above reasons, this study proposed a model that predicts solar energy of vertical surfaces of buildings with four stages below. Firstly, CIE (Commission Internationale de l'Eclairage) luminance distribution model was used to calculate the brightness distribution of the sky using NREL (National Renewable Energy Laboratory) solar tracking algorithm. Secondly, we suggested a method of calculating the shadow effect using ray tracing. Thirdly, LOD (Level of Detail) 3 of 3D spatial data was used as input data for analysis. Lastly, the accuracy was evaluated based on the atmospheric radiation data collected through the ground observation equipment in Daejeon, South Korea. As a result of evaluating the accuracy, NMBE was 5.14%, RMSE 11.12, and CVRMSE 7.09%.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.721-724
• /
• 2005

In this study the spatial distribution characters of forest in forest damaged area were first considered by analyzing spatial data and monitoring forest landscape. Then suitable tree species on each site were selected through the weighted score analysis of GIS analysis methods. Finally, the best forest stand arrangement method could be presented on the 3D based simulation system for the advanced reforestation technology in Korea. For this purpose, the virtual reforestation system was implemented by using the concept of virtual GIS and CBD (Component Based Development) method. By use of this system the change offorest landscape of burnt forest area some years after reforestation practice could be detected and monitored by applying the site index and 3D modeling method.

• 한국자원식물학회지
• /
• 제11권3호
• /
• pp.345-352
• /
• 1998

A Korean endemic and evergreen small tree ' Dendropanax morbifera $L_{EV}$.(Araliaceae)' is a component of evergreen forest and mainly idstributein sourthern region and islands in Korea. A local population of D. morbifera which is located between evergreen and deciduous forest within 50m x 50m quadrate was investigated to ascertain the change of population structure, emergence and growth dynamics of seedlings and saplings, and pattern of spatial distribution by the temproal and spatial expansion of population . The result of analysis of population structure by Importnace Value(IV), evergreen forest showed a high species diversity of evergreen tree species such as Cinnamomum japonicum, Machilus japonica, Neolitsea serica, Daphniphyllum macropodum, Ligustrum japonicum, and etc, in middle and under story than in upper story where Camelia japonica and Quercus acuta were dominant. And in conterminous deciduous fores, the major component of evergreen forest in this region, Camellia japonica, Quercus acuta, evergreen tree of Lauraceae and etc. were abundant in only under story. IV of D. morbifera differed from among three story. In comparative analysis of emergence and growth dynamics of D. morbifera seedlings and saplings between evergreen and deciduous forest, emergece and density of seedlings were significantly greater in evergreen than in deciduous forest, and growth of height and basal diameter of seedlings and saplings were slightly larger in evergreen than in deciduous forest. The spatial distribution patterns by Moristia's index mapping of indivuduals using a lattice method of XY axis within this population showed that seedlings(age up to 2 years) and saplings (age>2 years and height<1m) both evergreen and deciduous forest were more or less aggregated apart from mature trees, and thougth intermediate trees(height>1m and dbh<10cm) had a aggregated distribution pattern, mature trees(dbh>10cm were uniform. In conclusion , the expansion of D. morbfera population from evergreen to deciduous forest accompanied with a mumber of evergreen woody species, and also, emergence and recruitment, and growth of seedlings were greatly influenced moisture and canopy by around community structure.

• 터널과지하공간
• /
• 제15권4호
• /
• pp.264-274
• /
• 2005

대규모 채석을 위한 최적 발파 패턴은 파쇄 입도의 분포에 따라 추산된 최소 발파 비용에 기초하여 결정될 수 있다. 따라서 파쇄 입도의 분포를 예측하는 문제는 매우 중요하다. 파쇄 입도 분포의 예측에 사용된 모델은 현장 시험발파로부터 얻은 발파석에 대한 입도 분포와 비교 검토하여 선택하였다. 그 결과 Kuz-Ram 모델을 파쇄 입도 모델로 선정하였으며, 이 모델은 현지 암반의 상태를 고려할수 있는 발파암 계수라는 지배적 인자를 사용한다. 전체 생산 비용 산정을 위해 발파암 계수의 3차원 공간 분포의 추정은 매우 중요한 문제라 할 수 있다. 따라서 본 연구에서는 대규모 발파 예정 대상 구역 전체의 발파암 계수에 대한 3차원 공간 분포를 추정하기 위해 순차적 지시 시뮬레이션을 적용하였다. 순차적 지시 시뮬레이션은 조건부 시뮬레이션의 한 종류로서, 크리깅 기법에 비해 높은 변동도 모델 재현성과 취득된 조사 자료의 분포 모델에 관한 정보를 활용함으로써 추정치에 대한 불확실성을 보다 줄일 수 있는 장점을 가진다. 발파암 계수의 3차원 분포로부터 대상 구역 전체의 발파암 TYPE을 분류할 수 있었으며, 각 TYPE별 최적 발파 패턴을 설계할 수 있었다. 또한, 지반고별 발파암 계수의 분포에 대한 정량적 정보를 제공함으로써 각 공정단계별 비용을 추산하여 공정계획을 세우는데 도움이 될 수 있다.