• Toxicological Research
• /
• v.34 no.4
• /
• pp.355-361
• /
• 2018

Methylisothiazolinone (MIT) has been used in combination with methylchloroisothiazolinone (CMIT) for cosmetic products such as shampoo, body lotion, and skin care products. The mixture of CMIT/MIT has been found to cause allergic contact dermatitis and is thus no longer permitted for use as a preservative in leave-on cosmetics. However, MIT itself was approved as a stand-alone preservative at a maximum concentration of 100 ppm as the toxicity was derived from CMIT rather than MIT. However, in many countries, allergic skin irritation caused by MIT remains a social concern. In this study, skin irritation was assessed for the presence of MIT, propylene glycol, and their mixture using a 3D human skin model $EpiDerm^{TM}$. Although non-diluted MIT causes serious skin toxicity, skin irritation was not observed at a concentration of 100 ppm, the maximum permissible level for cosmetics and personal care products according to European regulations. Propylene glycol, the most widely used vehicle for MIT, did not cause skin irritation in the 3D skin model. The results are expected to provide information for regulatory policies and guidelines on the use of biocides in consumer products.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.38-44
• /
• 1998

The skin permeation and the skin primary irritation of two UV filters from caprylic capryl triglyceride (oil), oil in water (O/W) and water in oil (W/O) emulsions, were evaluated. We selected octyl moth-oxycinnamate (OMC) broadly used in cosmetics and polymeric sunscreen agent (PSA, average MW: 2,000) synthesized by the coupling reaction of 2-ethylhexyl 4-hydroxycinnamate with poly vinylbenzyl chloride, as model UV filters. For in vitro skin permeation experiments, Franz diffusion cells (effective diffusion area:1.766cm) and the excised skin of female hairless mouse aged 8 weeks were used. Oil or emulsion containing UV filters was applied in the donor compartment. The skin primary irritation was evaluated with fe-male guinea pigs (8-10 weeks,350-400 g). In oil and emulsions, the skin permeability and the skin primary irritation of PSA were lower than those of OMC. The skin permeability of UV filters was lower when they were in oil-in-water emulsion (OIW) than water-in-oil emulsion (W/O). We suggest that O/W system would be more useful when compared with W/O system, and PSA could be a good candidate for a future sunscreen agent for reducing the skin irritation.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.751-758
• /
• 2008

The purpose of this study is to implement 3D Face Model, which resembles a user, using 3D Graphic techniques. The implemented 3D Face model is used to further study and implement 3D Facial Aesthetic Surgery System, that can be used to increase the satisfaction rate of patient by comparing before and after facial aesthetic surgery. For designing and implementing 3D Facial Aesthetic Surgery System, 3D Modeling, Texture Mapping for skin, Database system for facial data are studied and implemented independently. The Detailed Adjustment System is, also, implemented for reflecting the minute description of face. The implemented 3D Facial Aesthetic Surgery System for this paper shows more accuacy, convenience, and satisfaction in compare with the existing system.

• Environmental Analysis Health and Toxicology
• /
• v.29
• /
• pp.4.1-4.10
• /
• 2014

Objectives Effects of nanoparticles including zinc oxide nanoparticles, titanium oxide nanoparticles, and their mixtures on skin corrosion and irritation were investigated by using in vitro 3D human skin models ($KeraSkin^{TM}$) and the results were compared to those of an in vivo animal test. Methods Skin models were incubated with nanoparticles for a definite time period and cell viability was measured by the 3-(4, 5-dimethylthiazol-2-yl)-2.5-diphenyltetrazolium bromide method. Skin corrosion and irritation were identified by the decreased viability based on the pre-determined threshold. Results Cell viability after exposure to nanomaterial was not decreased to the pre-determined threshold level, which was 15% after 60 minutes exposure in corrosion test and 50% after 45 minutes exposure in the irritation test. IL-$1{\alpha}$ release and histopathological findings support the results of cell viability test. In vivo test using rabbits also showed non-corrosive and non-irritant results. Conclusions The findings provide the evidence that zinc oxide nanoparticles, titanium oxide nanoparticles and their mixture are 'non corrosive' and 'non-irritant' to the human skin by a globally harmonized classification system. In vivo test using animals can be replaced by an alternative in vitro test.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.32 no.6
• /
• pp.384-395
• /
• 2018

The aim of this study was to investigate whether a novel formulation of an herbal extracts has an inhibitory effect on obesity. To determine its anti-obesity effects, we performed anti-obesity-related experiments in vitro and in vivo. Thus, our present study was carried out to evaluate the anti-obesity effect of herbal extracts using a high fat diet (HFD)-induced obese mouse model and 3T3-L1 adipose cells. The effects of each herbal extracts on lipid accumulation in 3T3-L1 cells were examined using Oil Red O staining. Results showed that treatment with each herbal extracts at $10{\sim}100{\mu}g/ml$ had no effect on cell morphology and viability. Without evidence of toxicity, herbal extracts treatment decreased lipid accumulation compared with the untreated adipocytes controls as shown by the lower absorbance of Oil Red O stain. Futhermore, compared with control-differentiated mature adipocytes, each herbal extracts significantly inhibited lipid accumulation in mature 3T3-L1 adipocytes. In the HFD-fed obese mice, body weight, liver weight and white adipose tissue weights were significantly reduced by mixture of herbal extracts administration in mouse skin. Futhermore, we found that mixture of herbal extracts administration suppressed serum triglyceride (TG), and total cholesterol (TCHO) in HFD-induced obese mouse model. The mixture of herbal extracts of permeability was estimated by measuring the transepithelial electrical resistance (TEER) value in pig skin. The optimized formulations of herbal extracts (Test 3 formulation) showed skin permeation. However, test 1 formulation containing essential oil as enhancer showed maximum skin permeation. After confirming the enhanced skin permeability, in vivo studies were performed to assess whether skin irritation potential on the basis of a primary irritation index (PII) in rabbit skin. Reactions were scored for erythema/edema reactions at 24 h, 48 h and 72 h post-application. It was concluded that the test 1 formulation was not irritation (PII = 0). The present study suggests that the test 1 formulation might be of therapeutic interest with respect to the treatment of obesity.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.10
• /
• pp.47-54
• /
• 2006

H-pile can be more easily driven than pipe pile by pile driver and shows high skin friction and plugging effect. This experimental study was devoted to investigate skin friction of H group piles in granite soil under laboratory test. Pile arrangements $(1{\times}2,\;1{\times}3,\;2{\times}2,\;2{\times}3,\;3{\times}3)$, pile space (2D,4D,6D), and soil density $(D_r=40%,\;80%)$ were tested. The main results obtained from the model tests can be summarized as follows. Distribution ratio of skin friction for total load decreased by $48{\sim}39%$ (dense soil), $32{sim}27%$ (loose soil) as piles space ratio increases in case of $3{\times}3$ group piles. And the distribution ratio of skin friction by pile settlements under loose soil decreased by about $58{\sim}33.2%$ in $2{\times}2$ group piles and about $65{\sim}38%$ in $3{\times}3$ group piles respectively.

• Journal of Acupuncture Research
• /
• v.38 no.2
• /
• pp.159-164
• /
• 2021

Background: Cupping is widely used in Korean medicine, but there is a risk of bacterial infection if the suction pump (used for inducing negative pressure) and the patients' skin are not separated. This study aimed to investigate the effect of layer cupping by comparing the pressure changes between layer cupping and conventional cupping. Methods: To evaluate pressure changes the study was designed with 3 types of conditions applied to a skin model: (1) a Dongbang cup with a manual or motor suction pump (conventional cupping); (2) layer cupping with 2 Dongbang cups; and (3) layer cupping with a cup made by 3D printing and a Dongbang cup. Results: When a manual suction pump was used (conventional cupping), the pressure did not decrease steadily, and in 1 section there was an increase in pressure. When layer cupping was used, the pressure in the lower cup (which would be directly applied to the patient's skin), decreased steadily. Conclusion: In the pressure change graph for layer cupping in this skin model, the pressure in the lower cup (which would be placed on the patient's skin) steadily decreased, and reached equilibrium. Therefore, the layer cupping model may help to reduce the risks of bacterial infection.

• Journal of Korea Multimedia Society
• /
• v.8 no.1
• /
• pp.88-100
• /
• 2005

In computer graphics, realistic skin rendering has been regarded as difficult tasks and remains as an important research subject. Translucent materials like skin have some complicated optical properties including subsurface scattering. In this paper, we proposes a skin shader based on subsurface scattering to render realistic skin and it has been implemented as a plug-in for Maya, 3D Package. The rendered image using this proposed skin shader appears more realistic than the rendered image using classical shading techniques. Furthermore, we could model sebum, epidermis, dermis using specular reflection, multiple scattering, single scattering respectively.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.3
• /
• pp.211-216
• /
• 2016

Micronucleus test is genotoxicity assay for detection of micronuclei in the cytoplasm of interphase cells. The reduction and replacement of in vivo toxicity testing on animals require the development of in vitro models to predict the genotoxicity or other tests for cosmetic products. In this study, we evaluated a genotoxicity assay for topically applied chemicals using a three-dimensional human reconstructed skin model, KeraSkin$^{TM}$. Two genotoxins, mitomycin C (MMC) and methyl methanesulfonate (MMS), induced significant dose-related increases in cytotoxicity and micronuclei induction in the skin model. In contrast, two non-genotoxins, 4-nitrophenol (4-NP) and trichloroethylene (TCE), induced cytotoxicity but not micronucleus formation. In conclusion, micronucleus test using human skin model may be useful for predicting in vitro genotoxic potentials of cosmetic products.

• Toxicological Research
• /
• v.17 no.3
• /
• pp.167-171
• /
• 2001

Oral mucous membrane test using Syrian hamsters was performed to evaluate the reliability as a model system for the assessment of the potentially irritating substances intended for the mucous membranes, and to determine the irritating potential of a new emulsion-type formulated toothpaste. After test substances were implanted into the cheek pouches of hamsters with diluents (20 mg/kg) under pento-barbital sodium anesthesia, we made the comparison in irritation between emulsion-type and dispersion-type of triclosan (TCS) formulations in the range of 0.2% to 0.3%. The emulsion-type formulations using non-ionic surfactant showed less mucosal lesion than other commercial toothpastes with 0.3% TCS, or dispersion-type ones. However, no significant difference in irritation was detected between 0.2% and 0.3% TCS. We report that this hamster cheek pouch method could be a reliable approach for the evaluation slight difference in the irritating potentials of cosmetics and hygiene products intended for the lips or other mucous membranes, and this method showed that the new emulsion-type formulation significantly lowered the TCS-induced toxicity, compared with other commercial toothpastes.