• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.543-547
• /
• 2005

해수소통을 전제한 경우 새만금호 내측의 염분변화가 만경강의 평수량 및 홍수량 유입에 따라 혼합확산되는 것을 평가하고 배수갑문 방류시 담수가 외해에 미치는 영향범위를 평가하기 위한 수치모형실험이 실시되었다. 이때 새만금호 내부의 관리수위는 DL=-1.5m, DL=-0.5m, DL=-0.0m, DL=+0.5m가 고려되었다. 외해역의 평가는 새만금을 포함한 전체해역에 대해 외해경계에서 4개의 주요분조($M_2,S_2,K_1,O_1$)의 진폭과 위상각을 대입하고 2차원 ADCIRC 및 3차원 TIDE3D 모형을 적용하였다. 내부는 여기에 3개 연직층을 고려한 3차원 ICM 모델이 추가 적용되었다. 내부의 혼합확산 평가 결과는 시간이 지남에 따라 외해에서 유입되는 염수가 상대적으로 저염인 담수호 내부로 유입 확산되는 것이 평면적으로나 연직방향으로 변화되는 것을 매우 뚜렷하게 나타남을 알 수 있고, 최소 1개월 이상 경과되어야 만경호측에 외해수가 혼합되는 것으로 분석된다. 수문을 개방하지 않은 상태에서 새만금 방조제 외해의 최강창낙조시 조류속도는 0.5-0.6m/s 정도에 해당되는 것으로 분석되었다. 신시갑문을 개방하는 경우 관리수위가 DL=-1.5m와 DL=+0.5m로 변함에 따라 갑문 전면 10Km-l3Km에 이르는 해역까지 수문개방에 따라 0.5m/s의 유속이 형성된다. 가력갑문을 개방하는 경우는 신시갑문의 개방에 따른 영향보다는 작지만 갑문 전면 14Km까지 0.5m/s의 강한 유동이 관리수위별로 나타나고 있다. 이러한 결과는 담수 방류로 인한 영향이 주기적으로 낙조시에 발생되어 새만금 방조제 전면의 해수순환과 유동에 적지 않은 영향을 미칠 개연성을 제시하는 것으로 해석된다.$\cdot$유출에 의한 수질변화양상을 단계적으로 구분하여 수질변화에 중요한 영향을 미치는 인자에 대한 이론적인 분석을 수행하고, 배수갑문 개방에 의한 수질개선효과를 최대화하기 위한 환경관리 방안 제시에 중점을 두어 수행하였다.ncy), 환경성(environmental feasibility) 등을 정성적으로(qualitatively) 파악하여 실현가능한 대안을 선정하였다. 이렇게 선정된 대안들은 중유역별로 검토하여 효과가 있을 것으로 판단되는 대안들을 제시하는 예비타당성(Prefeasibility) 계획을 수립하였다. 이렇게 제시된 계획은 향후 과학적인 분석(세부평가방법)을 통해 대안을 평가하고 구체적인 타당성(feasibility) 계획을 수립하는데 토대가 될 것이다.{0.11R(mm)}(r^2=0.69)$로 나타났다. 이는 토양의 투수특성에 따라 강우량 증가에 비례하여 점증하는 침투수와 구분되는 현상이었다. 경사와 토양이 같은 조건에서 나지의 경우 역시 $Ro_{B10}(mm)=20.3e^{0.08R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심

• The Korean Journal of Food And Nutrition
• /
• v.17 no.1
• /
• pp.41-46
• /
• 2004

This study was designed to investigate the effective ratio of healthy bread with jasmin tea powder. The weight, volume, and color difference of bread with various jasmin tea powder was measured and the picture of bread was taken and the panel test was taken. The weight of bread was increased and the volume was decreased significantly according to increase of jasmin tea powder. To avoid the decrease of volume, the active gluten was added, but there was not shown the increse of bread volume by active gluten. In the result of panel test and volume measurement, addition of 3% jasmin tea powder was appropriate. Therefore, using the jasmin tea powder, the diversity of bread by functionality, nutritional composition, taste, color, flavor of jasmin tea powder can be developed. This result will support the background the development of jasmin tea bread of good quality.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.3
• /
• pp.51-63
• /
• 2011

The purpose of this study is to create a landscape image that considers the selection of techniques that can enhance landscape reproduction in streetscape evaluation using 3 dimensional simulations and to evaluate ways to verify similarities and the psychological changes on the part of users by season. In the comparison of technique, the Low(apply normal map) technique was selected for the natural representation of trees in a near and middle view and the Plane technique was selected for the distant view. As the result of the verification, all indicators of physical similarity were evaluated over 4.50 points and most indicators of psychological similarity were found to have no difference except for indicators of 'disordered orderly' and 'dirty - clean'. According to the results of analyzing the landscape simulation by season, images of 'bright', 'beautiful', and 'static', etc., were evaluated high for the spring streetscape. The images of 'open', 'refresh', and 'animate' appeared high in summer and images of 'warm' and 'dark' were found to be high in fall. On the other hand, all images were evaluated as low except for the 'orderly' image. In the preference of streetscape by season, summer and spring were highly preferred at 5.01 and 4.98 with winter as the lowest at 3.48. As the results of the analysis of preference factor, the spring streetscape was found to be a major influence in preference by 0.540 in 'aesthetics'. In the case of summer, 'order' was found to be high at 0.417 while influences in preference included 'variety' and 'aesthetics' in fall and 'variety', 'aesthetics', and 'order' in winter. A determination of suitable spatial planning using a comparative analysis of various city streets will be enabled through the methods of this study.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1066-1070
• /
• 2003

Recently technologies have created new principle and theory but the PID control system remains its popularity as the PID controller contains simple structure, including maintenance and parameter adjustment being so simple. Thus, this paper proposes auto tune PID by fuzzy logic controller based on FPGA which to achieve real time and small size circuit board. The digital PID controller design to consist of analog to digital converter which use chip TDA8763AM/3 (10 bit high-speed low power ADC), digital to analog converter which use two chip DAC08 (8 bit digital to analog converters) and fuzzy logic tune digital PID processor embedded on chip FPGA XC2S50-5tq-144. The digital PID processor was designed by fundamental PID equation which architectures including multiplier, adder, subtracter and some other logic gate. The fuzzy logic tune digital PID was designed by look up table (LUT) method which data storage into ROM refer from trial and error process. The digital PID processor verified behavior by the application program ModelSimXE. The result of simulation when input is units step and vary controller gain ($K_p$, $K_i$ and $K_d$) are similarity with theory of PID and maximum execution time is 150 ns/action at frequency are 30 MHz. The fuzzy logic tune digital PID controller based on FPGA was verified by control model of level control system which can control level into model are correctly and rapidly. Finally, this design use small size circuit board and very faster than computer and microcontroller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2508-2513
• /
• 2003

This paper presents a nuclear steam generator tube inspection/maintenance robot system. The robot assists in automatic non-destructive testing and the repair of nuclear steam generator tubes welded into a thick tube sheet that caps a hemispherical or quarter-sphere plenum which is a high-radiation area. For easy carriage and installation, the robot system consists of three separable parts: a manipulator, a water-chamber entering and leaving device for the manipulator and a manipulator base pose adjusting device. A software program to control and manage the robotic system has been developed on the NT based OS to increase the usability. The software program provides a robot installation function, a robot calibration function, a managing and arranging function for the eddy-current test, a real time 3-D graphic simulation function which offers remote reality to operators and so on. The image information acquired from the camera attached to the end-effecter is used to calibrate the end-effecter pose error and the time-delayed control algorithm is applied to calculate the optimal PID gain of the position controller. The developed robotic system has been tested in the Ulchin NPP type steam generator mockup in a laboratory.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.3
• /
• pp.65-72
• /
• 2020

With the development of information technology and the growth of the scale of system and network, cyber threats and crimes continue to increase. To cope with these threats, cybersecurity training based on actual attacks and defenses is required. However, cybersecurity training requires expert analysis and attack performance, which is inefficient in terms of cost and time. In this paper, we propose a cyber attack simulator that automatically executes attack techniques. This simulator generates attack scenarios by combining attack techniques modeled to be implemented and executes the attack by sequentially executing the derived scenarios. In order to verify the effectiveness of the proposed attack simulator, we experimented by setting an example attack goal and scenarios in a real environment. The attack simulator successfully performed five attack techniques to gain administrator privileges.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.2
• /
• pp.249-265
• /
• 1995

The performance of a refrigerant mixture of propane(R290)/isobutane(R600a) as a substitute for CFC12 was investigated in a domestic refrigerator with single evaporator. A thermodynamic cycle simulation indicated an increase in COP of a 1.7 to 2.4% with R-290/600a in the composition range of 0.2 to 0.6 mass fraction of R290 compared to CFC12. For the tests, two units($299{\ell}$, $465{\ell}$) were used. All refrigeration components remained the same throughout the tests, except that the length of capillary tube and amount of charge were changed for the mixture. The refrigerators were fully instrumented with more than 20 thermocouples, 2 pressure transducers, and watt/watt-hour meter for each refrigerator. 'Energy consumption test' and 'no load pulldown test' were performed under the same condition. The experimental results obtained with the same compressor indicated that R-290/600a mixture at 0.6 mass fraction of R290 showed a 3 to 5% increase in energy efficiency and a faster cooling speed compared to CFC12. The R-290/600a mixture showed a shorter compressor on-time and a lower compressor dome temperature than CFC12. In conclusion, the proposed hydrocarbon mixture seems to be an appropriate candidate to replace CFC12 without causing more environmental problems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1633-1640
• /
• 2016

In this paper, we propose a open-ended rectangular microstirp patch antenna with fork-shaped feeding structure. This antenna extends the effective bandwidth by transforming single or multi resonant frequency and is designed planar monopole structure with microstrip line to satisfy the WLAN bands (2.4 - 2.484, 5.15 - 5.35, 5.25-5.825 GHz). The substrate is printed in 0.8 mm thickness on an FR-4 board. A commercial 3D simulation tool was used to analyze surface current and electromagnetic field distribution in order to analyze the operation mode and reconfiguration principle of antenna. According to the lengths of individual patches, simulated reflection loss was compared to obtain optimized values. When it was designed with the optimized values, it satisfied WLAN bands (2.380 - 2.710, 4.900 - 5.950 GHz), if the switch is off, and 2.4 WLAN band (2.380 - 2.710 GHz). From the fabricated and measured results, measured results of return loss, gain and radiation patterns characteristics displayed for operating bands.

• Journal of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.1-12
• /
• 2003

Nonthermal particles can be produced due to incomplete thermalization at collisionless shocks and further accelerated to very high energies via diffusive shock acceleration. In a previous study we explored the cosmic ray (CR) acceleration at cosmic shocks through numerical simulations of CR modified, quasi-parallel shocks in 1D plane-parallel geometry with the physical parameters relevant for the shocks emerging in the large scale structure formation of the universe (Kang & Jones 2002). Specifically we considered pancake shocks driven by accretion flows with $U_o = 1500 km\;s^{-l}$ and the preshock gas temperature of $T_o = 10^4 - 10^8K$. In order to consider the CR acceleration at shocks with a broader range of physical properties, in this contribution we present additional simulations with accretion flows with $U_o = 75 - 1500 km\;s^{-l}$ and $T_o = 10^4K$. We also compare the new simulation results with those reported in the previous study. For a given Mach number, shocks with higher speeds accelerate CRs faster with a greater number of particles, since the acceleration time scale is $t_{acc}\;{\propto}\;U_o^{-2}$. However, two shocks with a same Mach number but with different shock speeds evolve qualitatively similarly when the results are presented in terms of diffusion length and time scales. Therefore, the time asymptotic value for the fraction of shock kinetic energy transferred to CRs is mainly controlled by shock Mach number rather than shock speed. Although the CR acceleration efficiency depends weakly on a well-constrained injection parameter, $\epsilon$, and on shock speed for low shock Mach numbers, the dependence disappears for high shock Mach numbers. We present the 'CR energy ratio', ${\phi}(M_s)$, for a wide range of shock parameters and for $\epsilon$ = 0.2 - 0.3 at terminal time of our simulations. We suggest that these values can be considered as time-asymptotic values for the CR acceleration efficiency, since the time-dependent evolution of CR modified shocks has become approximately self-similar before the terminal time.

• Journal of Broadcast Engineering
• /
• v.9 no.3
• /
• pp.196-206
• /
• 2004

This paper presents an efficient joint disparity-motion estimation algorithm for stereo sequence CODEC. Disparity vectors are estimated by the left and right motion vectors and previous disparity vectors for every frame. In order to obtain more accurate disparity vectors. we include a spatial prediction Process after the feint estimation. From joint estimation and spatial prediction, we can obtain accurate disparity vectors and then Increase coding efficiency. Finally, we proposed the backward quadtree decomposition. which helps the encoder to have a more detailed disparity vector map without transmitting additional coding bits for quadtree information. We confirmed superior performance of the proposed method through computer simulation.