• Journal of the Korea Computer Graphics Society
• /
• v.28 no.4
• /
• pp.1-11
• /
• 2022

The Skinned Multi-Person Linear Model (SMPL) is the most widely used parametric 3D Human Model optimized and learned from CAESAR, a 3D human scanned database created with measurements from 3,800 people living in United States in the 1990s. We point out the lack of racial diversity of body types in SMPL and propose K-SMPL that better represents Korean 3D body shapes. To this end, we develop a fitting algorithm to estimate 2,773 Korean 3D body shapes from Korean body measurement data. By conducting principle component analysis to the estimated Korean body shapes, we construct K-SMPL model that can generate various Korean body shape in 3D. K-SMPL model allows to improve the fitting accuracy over SMPL with respect to the Korean body measurement data. K-SMPL model can be widely used for avatar generation and human shape fitting for Korean.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.115-120
• /
• 2012

In this paper, we present a method to automatically quantify the three-dimensional (3D) volume of red blood cells (RBCs) using off-axis digital holographic microscopy. The RBCs digital holograms are recorded via a CCD camera using an off-axis interferometry setup. The RBCs' phase image is reconstructed from the recorded off-axis digital hologram by a computational reconstruction algorithm. The watershed segmentation algorithm is applied to the reconstructed phase image to remove background parts and obtain clear targets in the phase image with many single RBCs. After segmenting the reconstructed RBCs' phase image, all single RBCs are extracted, and the 3D volume of each single RBC is then measured with the surface area and the phase values of the corresponding RBC. In order to demonstrate the feasibility of the proposed method to automatically calculate the 3D volume of RBC, two typical shapes of RBCs, i.e., stomatocyte/discocyte, are tested via experiments. Statistical distributions of 3D volume for each class of RBC are generated by using our algorithm. Statistical hypothesis testing is conducted to investigate the difference between the statistical distributions for the two typical shapes of RBCs. Our experimental results illustrate that our study opens the possibility of automated quantitative analysis of 3D volume in various types of RBCs.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.5
• /
• pp.1-11
• /
• 2020

Image-based virtual try-on (VTON) is becoming popular for online apparel shopping, mainly because of not requiring 3D information for try-on clothes and target humans. However, existing 2D algorithms, even when utilizing advanced non-rigid deformation algorithms, cannot handle large spatial transformations for complex target human poses. In this study, we propose a 3D clothing reconstruction method using a 3D human body model. The resulting 3D models of try-on clothes can be more easily deformed when applied to rest posed standard human models. Then, the poses and shapes of 3D clothing models can be transferred to the target human models estimated from 2D images. Finally, the deformed clothing models can be rendered and blended with target human representations. Experimental results with the VITON dataset used in the previous works show that the shapes of reconstructed clothing are significantly more natural, compared to the 2D image-based deformation results when human poses and shapes are estimated accurately.

• Coupled systems mechanics
• /
• v.9 no.4
• /
• pp.311-323
• /
• 2020

This paper deals with the effect of the mode shapes on the dynamic response of a multi-storey frame subjected to moving train loads which are modelled as loads of constant intervals with constant velocity using the finite element method. The multi-storey frame is modelled as a number of Bernoulli-Euler beam elements. First, the first few modes of the multi-storey frame are determined. Then, the effects of force span length to beam length ratio and velocity on dynamic magnification factor (DMF) are evaluated via 3D velocity-force span length to beam length ratio-DMF graphics and its 2D projections. By using 3D and 2D graphics, the directions of critical speeds that force the structure under resonance conditions are determined. Last, the mode shapes related to these directions are determined by the time history and frequency response graphs. This study has been limited by the vibration of the frame in the vertical direction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.266-275
• /
• 2009

Variations of individual hip shapes are a major obstacle in pattern making for fitness. The drafting method is used for pattern making in today's apparel industry. Whilst catering to a limited number of information such as waist and hip sizes, this method does not cater to variations in hip shape. This paper describes the analysis of hip shapes using 3D body model and tries to make sure the relationship between hip shape and pattern by calculating hip angle and dart amount. We achieved results in analyzing various hip shapes by extracting hip angle. Moreover, various hip shapes can be divided into three types(A, B and C) by the hip angle value($K_{sh}-K_{wsh}$). When we use computerized draping method to make a personalized pattern for a tigth skirt, we easily create complex dart lines automatically. Therefore we achieve the result of individual dart amount such as distance between dart lines and dart areas. C type of hip shape had short dart length, long distance between dart lines and a large amount of dart area. On the other hand, A type had long dart length, short distance between dart lines and small amount of dart area. B type had long length and long distance between dart lines and large amount of dart area. In traditional pattern making, distance between dart lines is usually proportional to amount of dart area because of similarity in dart line shape. In our pattern, there is no proportional relationship between dart line distance and dart area. This means that variations in hip shapes result in a wide variety of dart line curvature resulting in a wide range of dart area. By ensuring an accurate relationship between hip shape and pattern, it is possible to make patterns which result in clothing that not only fits well, but also exhibits other desirable properties.

• Korean Journal of Human Ecology
• /
• v.23 no.4
• /
• pp.653-663
• /
• 2014

In the design of stereoscopic clothing items, the 3D shapes of the space between clothing and body (SCB; Space shape between Clothing and Body) can be very important clues to improve the fit for various body shapes. Therefore, this research suggests a method for extracting the shape of SCB using the mold bra cup as an example. The SCBs were extracted from two kinds of 3D images, a small-breasted women's nude breast images and bra-wearing images. The the mold bra cups were compressed by wearing, and the outer and lower part of the SCBs could not be obtained because of the movement of the breast volume in the bras. Therefore, the SCBs could not be applied to the design of the mold bra cups directly. However, the suggested method can be useful when it is applied to stiffer clothing items and body parts whose shapes are not changed easily, such as a helmet or other body protectors.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.11
• /
• pp.1159-1167
• /
• 2011

A novel 3D tube scanning technique is proposed. The proposed tube scanning technique is developed for a special tube inspection module which consists of four line-lasers and one camera. Using the scanning module, we can reconstruct the 360 degree shapes of the inner surfaces of a cylindrical tube. From an image frame captured by the camera, we reconstruct a partial tube model based on four laser triangulations. Then by aligning such partial models with respect to a reference tube axis, a complete 3D shape of the tube is reconstructed. The tube axis in each reconstructed frame is aligned with a 3D Euclidean transformation to the reference axis. Several experiments show that the proposed method can align multiple tube axes very accurately and reconstruct 3D shapes of a tube with very low shape distortion.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.220-223
• /
• 2000

In this study for the development of a 3D pattern mill, we designed its layout which has high stiffness and low-weight structure. We calculated the load of each axis component when 3D pattern mill is under the worst cutting conditions. On base of the calculations, we determined the size of its structure and selected main components of the machine. Also, using FEM we analyzed the layout design of 3D pattern mill to reduce the wcight of structure and increase stiffness of it. According to the load position and direction, shapes and values of the deformation and the stress distributions are calculated, also we calculated the natural frequencies and mode shapes in order ta modify and redesign the weak parts

• The Journal of Advanced Prosthodontics
• /
• v.15 no.6
• /
• pp.302-314
• /
• 2023

PURPOSE. The aim of this study was to classify the shapes of retromolar pads and assess their morphometric differences using a 3D model. MATERIALS AND METHODS. Two hundred fully edentulous or Kennedy Class I partially edentulous patients (400 retromolar pads) were enrolled. Scan data of the definitive mandibular casts produced through functional impressions were obtained using a 3D laser scanner. Seven parameters (transverse diameter, longitudinal diameter, transverse-contour length, longitudinal-contour length, longitudinal/transverse diameter ratio, longitudinal/transverse-contour length ratio, and angle of the retromolar pad line to the residual alveolar ridge line) were measured using image analysis software. Subsequently, the pads were classified according to the shape. Statistical analyses were performed using 95% confidence intervals. RESULTS. Classifying the retromolar pads into three shapes led to high intra-examiner reliability (Cronbach's alpha = 0.933). The pear shape was the most common (56.5%), followed by oval/round (27.7%) and triangular (15.8%) shapes. There were no significant differences between the left and right sides according to the shape and no significant differences in any parameter according to age. The transverse diameter and longitudinal/transverse diameter ratio differed between sexes (P < .05). The triangular shape had a significantly different transverse diameter, transverse-contour length, longitudinal/transverse diameter ratio, and longitudinal/transverse-contour length ratio compared with the pear and oval/round shapes (P < .05). CONCLUSION. From a clinical reliability standpoint, classifying retromolar pads into three shapes (oval/round, pear-shaped, and triangular) is effective. The differences in the sizes among the shapes were attributed to the transverse measurement values.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.172-178
• /
• 1999

3D linear and circular interpolations are a basic part for the machining of complex shapes. Until now, because of the absence of appropriate algorithms for the generation of 3D lines and circles, a full accomplishment for available machine tool resolution is difficult. this paper presents new algorithms for 3D linear and circular interpolation in the reference pulse technique. In 3D space, the line or circle is not expressed as an implicit function, it is only defined as the intersection of two surfaces. A 3D line is defined as the intersection of two planes, and a 3D circle is defined as the intersection of a plane and the surface of a sphere. Based on these concepts, interpolation algorithms are designed to follow intersection curves in 3D space, and a real-time 3D linear and circular interpolator was developed in software using a PC. The algorithm implemented in a PC showed promising results in interpolation error and speed performance. It is expected that it can be applied to the next generation computerized numerical control systems for the machining of 3D lines, circles and some other complex shapes.