• 대한기계학회논문집
• /
• 제9권6호
• /
• pp.788-794
• /
• 1985

본 논문에서는 유동산란입자들을 1개에서 35개까지 불규칙 상태로 배열한 13 가지의 모델을 만들어 probe volume 속으로 횡단시키므로 나타나는 신호를 분석하여 수밀도와 가시도에 대한 실험적 관계를 파악하고 이를 이론식과 비교검토하고자 했다. 또한 두 입자의 간격을 좁혀가면서 실험하므로 간섭무늬에 대한 두 입자의 입상차가 합성신호특성에 중요 파라미터임을 확인했다.

• Clinical and Experimental Reproductive Medicine
• /
• 제20권2호
• /
• pp.131-135
• /
• 1993

The ultrasonographic examination with vaginal probe(5MHz) was undertaken in 101 patients at infertility clinic of Eul-Ji General Hospital. This study was performed to evaluate the number of mature follicles per menstrual cycle, the relationship of both ovaries for consecutive ovulatory cycle and the responsiveness of follicular growth followed by administration of ovulation inductant. The results were as follows; 1. The ovulation induction group with clomiphene citrate showed more follicles than natural menstrual cycle group. 2. Each means of numbers of follicles between ovaries showed no difference between natural and ovulatory induction groups. 3. The rate of follicular growth per one menstrual cycle showed higher in the clomiphene citrate induced cycle group. 4. Clomiphene citrate induced group tends to be easier for multiple follicular growth but had no significant difference in statistics. 5. The ipsilateral Vs. contralateral follicular growth rate for consecutive menstrual cycles in both ovaries showed no significant difference between two groups.

• 한국융합학회논문지
• /
• 제7권5호
• /
• pp.175-180
• /
• 2016

광기전공학 기술이 융합된 광학계의 발달은 광학계를 구성하는 부품의 표면이 비구면 또는 자유곡면으로 진화하고 있다. 본 논문에서는 광학식 자유곡면의 국부영역으로부터 직교하는 2방향의 곡률을 정의하여 전체 형상을 복원하는 알고리즘을 제안하였다. 8.4 m 자유곡면 형상을 가진 반사거울에 구현된 알고리즘을 적용한 결과 형상 복원 최대오차 0.065 nm, 평균제곱근 오차 0.013 nm로 복원됨을 확인하였다. 프루브의 위치오차 발생에 대한 노이즈 민감도를 해석한 결과, 2 mm 오차에 대해서도 형상복원 최대오차 30 nm, 제곱평균제곱근 오차 8.7 nm로 위치 오차에 매우 둔감한 알고리즘임을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.29-32
• /
• 2004

This work was devoted to an investigation of etching mechanisms for $(Ba,Sr)TiO_3$ (BST) thin films in inductively coupled $CF_4/Ar$ plasma. We have found that an increase of the Ar content in $CF_4/Ar$ plasma causes non-monotonic behavior of BST etch rate, which reaches a maximum value of 40 nm/min at 80% Ar. Langmuir probe measurements show a weak sensitivity of both electron temperature and electron density to the change of $CF_5/Ar$ mixing ratio. O-D model for plasma chemistry gave monotonic changes of both volume densities and fluxes for active species responsible for the etching process. The analysis of surface kinetics confirms the possibility of non-monotonic etch rate behavior due to the concurrence of physical and chemical pathways in ion-assisted chemical reaction.

• International Journal of Fluid Machinery and Systems
• /
• 제1권1호
• /
• pp.10-23
• /
• 2008

The development of pre-set wavelength G$\ddot{o}$rtler vortices are studied in the boundary-layer flows on concave surfaces of 1.0 and 2.0 m radius of curvature. The wavelengths of the vortices were pre-set by thin wires of 0.2 mm diameter placed 10 mm upstream and perpendicular to the concave surface leading edge. Velocity contours were obtained from velocity measurements using a single hot-wire anemometer probe. The most amplified or dominant wavelength is found to be 15 mm for free-stream velocity of 2.1 m/s and 3.0 m/s on the concave surface of R = 1 m and 2 m, respectively. The velocity contours in the cross-sectional planes at several streamwise locations show the growth and breakdown of the vortices. Three different regions can be identified based on the growth rate of the vortices. The occurrence of a secondary instability mode is also shown in the form of mushroom-like structures as a consequence of the non-linear growth of the G$\ddot{o}$rtler vortices. By pre-setting the vortex wavelength to be much larger and much smaller than the most amplified one, the splitting and merging of G$\ddot{o}$rtler vortices can be respectively observed.

• 한국정밀공학회지
• /
• 제28권6호
• /
• pp.738-744
• /
• 2011

The reliability of blade root fixing section is required to endure the centrifugal force and vibration stress for the last stage blade of steam turbine in thermal power plant. Most of the domestic steam turbine last stage blades have finger type roots. The finger type blade is very complex, so the inspection had been performed only on the exposed fixing pin cross-section area due to the difficulty of inspection. But the centrifugal force and vibration stress are also applied at the blade root finger and the crack generates, so the inspection method for finger section is necessary. For the inspection of root finger, inspection points were decided by simulating ultra-sonic path with 3D modeling, curve-shape probe and fixing jig were invented, and the characteristics analysis method of ultrasonic reflection signal and defect signal disposition method were invented. This invented method was actually executed at site and prevented the blade liberation failure by detecting the cracks at the fingers. Also, the same type blades of the other turbines were inspected periodically and the reliability of the turbine increased.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.357.2-357.2
• /
• 2014

Ruthenium (Ru) 박막은 우수한 화학적 열적 안정성 및 높은 일함수(4.7eV) 특성으로 인해 20 nm급 이하의 차세대 DRAM capacitor의 전극 물질 및 Cu metalization을 위한 seed layer로 각광을 받고 있다. Ru박막의 나노스케일 정보전자소자로의 적용을 위해서는 두께제어가 용이하고 3D 구조에서 우수한 단차 피복 특성을 갖는 atomic layer deposition (ALD)을 이용한 박막 형성이 필수적이다. 이에 본 연구에서는 ALD 방법을 이용하여 0가의(cymene) (1,5-hexadiene) Ru (0) (C16H24Ru) 전구체를 합성, ALD 방법을 이용하여 우수한 초기성장거동을 갖는 Ru 박막을 증착 하였다. 형성된 Ru 박막의 표면 형상, 두께, 밀도를 주사전자현미경(Scanning electron microscopy)과 X-선 반사율 측정(X-ray reflectometer)으로 조사하였다. 또한 전기적 특성을 4침법(four-point-probe)으로 측정하였고, 박막의 화학적 조성과 결정성의 정보를 X-선 광전자분광법(X-ray photoelectron spectroscopy)과 X-선 회절(X-ray diffraction)을 이용하여 확인하였다.

• 한국가축번식학회지
• /
• 제17권1호
• /
• pp.43-48
• /
• 1993

These experiments were carried out to construct mouse testis cDNA library and to to seen H-Y Ag gene. Mouse testis was obtained from BALB/c inbreed mouse that was after-born 1 week. Isolation of mouse testis total RNA was carried out by guanidum/cesium choloride, poly(A+) mRNAs were purified by oligo d(T)-cellulose chromatography method. To investigate protein synthesis activity, in-vitro translation carried out by total RNA and poly(A+) mRNA. The products of in-vitro translation were identified in 12.5% PAGE. Single strand DNA and double strand DNA were synthesized from poly(A+) mRNA and purified using phenol/chloroform/isoamylalcohol. Synthesized cDNA was combined with cohesive Eco RI polylinker, its recombination efficiencies were identified by X-gal and IPTG. In the cDNA library, 1$\times$107 phagemids were screened with 32P labelled probe. Hybridization were carried on $65^{\circ}C$ for 16~20hours. And 1$\times$106 phagemids were screened with rabbit-anti-H-Y. In former, select 5 positive clones, and later, 1 positive clone. Its southern blot analysis showed various size of insert cDNA from 0.7kb to 3kb.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 초전도 자성체
• /
• pp.25-28
• /
• 2002

Contact type Ic measurement system is needed to measure Ic continuously for long Bi-2223 tapes. Voltage and current terminals were designed several shapes for 4-probe method Ic measurement. Voltage terminals were made with brass and current terminals were made with Cu. We used 2 kinds of Bi-2223 tapes with different strength. When we measured Ic of Bi-2223 tape with Ag-Mg sheath, The proper weight was 0.3 kg and sharp pin type was better. according to voltage terminal shape and load. In case of Bi-2223 tape with Ag-Mn sheath, the proper terminal weight was 4 kg and sharp pin type was bad. It was possible to make continuous contact type Ic measurement system because We could get proper data - terminal shapes and loads - through these experiments.

• Corrosion Science and Technology
• /
• 제17권1호
• /
• pp.1-5
• /
• 2018

As structural materials, magnesium (Mg) alloys have been widely used in the fields of aviation, automobiles, optical instruments, and electronic products. There are few studies on the effect of coating conditions on the compositional variation during the formation process of the conversion coatings. Rare-earth based conversion coating on AZ91 magnesium alloy was prepared in ceric sulfate and hydrogen peroxide contained solution. The element composition and valence as well as their distribution in the coating were analyzed with energy dispersive X-ray spectroscopy (EDS), Electron probe micro-analyzer (EPMA), X-ray photoelectron spectroscopy (XPS). The effect of treating process on the element composition were also studied. It was found that the conversion coating surface consists of Mg, Al, O, Ce, and the weight content of Ce in the coating was affected by the treating solution concentration and immersion time; the Ce element was distributed in the coating non-uniformly and existed in the form of $Ce^{+3}$ and $Ce^{+4}$, while the O element existed in the form of $OH^-$, $O^{2-}$, $H_2O$. Based on microscopic analysis results, the electrochemical deposition mechanism on the micro-anode and micro-cathode in the process of the coating growth was suggested.