• Journal of the Korean housing association
• /
• v.25 no.1
• /
• pp.23-32
• /
• 2014

This research progressed space evaluation test with 3D simulation for exterior space of detached housing area among the Seoul spaces of child sex offense in 2010. Based on changing analysis on natural surveillance by spatial changes of each physical element, the purpose is to suggest effective construction planning measure for preventing child sex offense. The results of research are as follows. First, natural surveillance of space's height differences and width differences were compared and analyzed. As the result, footpath shows that stairs of slope didn't make lots of effects on visual block, not block of spatial moving, because of the difference of stair height. Also, in case of parking space, visual connection with footpath is expanded when designing pilotis rather than heightening floor height, so activities of exterior people could be seen more easily. Therefore, natural surveillance was higher. Second, natural surveillance of architectural elements by changes of footpath' width was compared and analyzed. As the result, openness of footpath should be secured rather than openness of architectural element. And, planning autonomy of architectural form could be more expanded when securing openness of footpath.

• Journal of Veterinary Clinics
• /
• v.33 no.6
• /
• pp.385-388
• /
• 2016

A 2-year-old, castrated male Chihuahua dog was referred for revision surgery for reluxation of the patella following surgery for medial patellar luxation (MPL) of the left stifle joint. On general inspection, the patient showed bilateral hindlimb weight-bearing lameness. On physical examination, bilateral non-reducible MPL was detected through palpation. Radiographs revealed bone deformities of both hindlimbs. Computed tomography (CT) was applied for a three-dimensional (3D) printing bone model to establish an accurate surgical plan. The bone plate was pre-contoured over the 3D-printing bone model after execution of corrective osteotomy and sterilized prior to use in surgery. Corrective osteotomy was performed through a staged, bilateral procedure. The patient showed improvement of limb function following surgery without reluxation of the patella. The use of 3D-printing bone model for accurate surgical planning of corrective osteotomy appears to be effective in increasing the accuracy of surgery. That may lead to successful surgical outcomes.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.62-67
• /
• 2007

The research team for the virtual construction development was established with the support of Korea Ministry of Construction and Transportation, and KICTEP (Korea Institute of Construction and Transportation Technology Evaluation and Planning). Its aims are to develop system that is to improve productivity & quality, to create a higher value-added business, and to cultivate international competitiveness in the construction industry. The virtual construction system is a design, engineering, and construction management information system that allows the project participants to effectively share the information throughout the construction life cycle with the support of 3D and design information. To achieve this, the research team focuses on developing several systems. First, the team focuses on developing for the pre-planning, the structural engineering, MEP, and the 3D based estimation system. Second, they focus on developing a simulation system for the construction process planning and feasibility study with help of the virtual reality technologies. Third, they focus on developing the CPLM (Construction Project Life-cycle Management) system for managing construction project data, and the decision support system that makes the collaboration among the project participants based on 3D technologies and information. We also focus on developing the SDAI (Standard Data Access Interface), the localized guideline for 3D design, and a training program. In addition, we focus on developing the undeveloped area of the commercial system and building an environment that can support the communication and collaboration in the construction life-cycle rather than developing the existing and commercialized system.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.454-457
• /
• 2008

The purpose of this study is to establish 3D equipment database for BIM because of efficient using a BIM tool. In this study (or paper), we analysis the mechanism of using equipment database. And then, a based on this results we apply and conduct the results. Therefore we expect to make better using method of BIM and efficient planning method of equipment.

• Progress in Medical Physics
• /
• v.3 no.1
• /
• pp.63-69
• /
• 1992

Recently, stereotactic radiosurgery plan is required with the information of 3-D image and dose distribution. The purpose of this research is to develop 3-D radiosurgery planning system using personal computer. The procedure of this research is based on three steps. The first step is to input the image information of the patient obtained from CT or MR scan into personal computer through on-line or digitizer. The position and shape of target are also transferred into computer using Angio or CT localization. The second step is to compute dose distribution on image plane, which is transformed into stereotactic frame coordinate. and to optimize dose distribution through the selection of optimal treatment parameters. The third step is to display both isodose distribution and patient image simultaneously using superimpose technique. This prototype of radiosurgery planning system was applied recently for several clinical cases. It was shown that our planning system is fast, accurate and efficient while making it possible to handle various kinds of image modelities such as angio, CT and MRI. It is also possible to develop 3-D planning system in radiation therapy using beam's eye view or CT simulation in future.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.18-20
• /
• 2004

This study is to find the optimal work plan of robot welding in the subassembly process of shipbuilding and to verify the found solution through 3-D simulation. The optimal work plan was established by evenly distributing the work amount to each stage and finding the shortest work sequence. The shortest work sequence was found by using the genetic algorithm. The result was compared with the practically adopted case and verified through the 3-D simulation.

• Progress in Medical Physics
• /
• v.2 no.2
• /
• pp.121-128
• /
• 1991

Radiosurgery treatment in the brain requires detailed information on three-dimensional dose distribution. A three-dimensional treatment planning is a prerequisite for treatment plan optimization. It must cover 3-D methods for representing the patient, the dose distributions, and beam settings. Three-dimensional dose models for non-coplanar moving arcs were developed using measured single beam data and efficient 3-D dose algorithms for circular fields. The implementation of three dimensional dose algorithms with stereotactic radiosurgery and the application of the algorithms to several cases are discussed.

• Journal of Korean Academy of Nursing
• /
• v.5 no.1
• /
• pp.17-30
• /
• 1975

The concept and definition of nursing and her role have been changing in accordance with the socio-cultural factors of the initial society. At present, nursing is conceptualized as a health care profession assisting man to restore, maintain and promote health by providing knowledge, wilt strength and resources through various processes of interaction. Man′s behavior, of individual and group activities for health inclusive, is driven by the initial man′s value orientation. The purpose of this study is to investigate the value orientation regarding health of rural health center milieu in order to give data for; 1. the planning for the delivery of community nursing service, 2. the health education plan at all level of nursing care activities, and 3. the planning of curriculum for nursing education. A hundred opinion leaders among the labor population residing in rural areas (P-group), hundred and six professional nurses at rural health centers (N-group) were indirectly interviewed through questionaries. And ninety five of N-group were interviewed likewise of their perceptions of P-group (NP-group) from July 15, to October 15, 1974. The result is as follows: 1. Maintenance of health is revealed to be the most valued component for man′s happiness in all the three groups. (P-group: 7.30 S. D.=1.31), (N-group :7.84 S. D. =49), and (NP-group : 5.93 S. D. =2.28) 2. The average value score of the maintenance of health revealed significant difference by P〈.001 level between each of the three groups. (Between N-group and P-group : T= -4.07 P and NP ; T=-6.93, N and NP: T=-9.35) 3. Basic health maintenance activities necessary for maintenance and promotion of personal health were moderately valued by all the three groups, P-group ; 3.74 (S. D. =.43) , N-group: 3.52 (S. D. =.34), NP-group: 3.07 (S. D. :.55) Among the 8 categories of basic health maintenance activities, "food intake" was highly valued by P-group (mean value score; 4.00 S. D=.51) , "exercise and rest" and "personal cleanliness" was highly valued by both P-group (4.02, 4.08) and N-group (4.08, 4.22). 4. The mean value score of basic health maintenance activities revealed significant difference by P〈.001 level between each of the three groups (between P-group and N-group: T=-4, 07, N-and NP: T=-6.93, P and NP T=-9.35) 5. Among the 30 questionaries, dynamic activities for health maintenance were more valued in comparison to passive activities in an tile three groups. 6. In N-group, correlation between the value of basic health maintenance activities and the personal health status personal revealed moderate significance. Correlation between the value of basic health maintenance activities and the age revealed low significance. 7. In group, correlation between the value of basic health maintenance activities and; perception of personal health status revealed non significance, between the age and sex revealed low sign affiance, and between the educational status revealed moderate significance. Recommendations are as follows ; 1. The efforts towards alteration of value orientation concerning health in general in community nursing practice de focussed be that of family Planning. 2. In order to prepare professional nurses competent in understanding individual and group, social science and behavioral science be strength ended in planning nursing curriculum. 3. Milieu of nursing experience during nursing education be Planned to begin at simple nursing problem and move towards complex, f. e. home care towards health crisis situation in order to achieve dynamic role mastery.

• Asian Journal of Innovation and Policy
• /
• v.9 no.3
• /
• pp.281-307
• /
• 2020

A variety of approaches are being applied to improve the existing ex-ante evaluation by expert panels in publicly funded R&D. While the objective evaluation criteria are constantly being improved to screen and select the superior projects, alternative approaches such as random prioritization and logical modeling are also underway to overcome the conservative bias of reviewers and to secure disruptive innovation. This study intends to find critical implications for ex-ante evaluation of public R&D system from the comparison of Indonesia and Korea. For the comparative analysis, literature review and expert in-depth interviews are conducted on the national R&D system and the selection evaluation process. In Korea, the selection criteria of projects are legally promulgated for establishing an objective evaluation system, and at the program level, the major considerations in the planning process are specified by Presidential Decree. On the other hand, while Indonesia conducts R&D in 47 strategic fields largely by public research institutes (PRI) based on the non-competitive government contributions. This study draws out implications of institutionalizing the planning process at the level of program, and of increasing the ratio of contract-based competitive funding at the level of project in the national R&D portfolio.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.641-642
• /
• 2015

Unlike for other building processes, BIM for earthwork does not need a large variety of 3D model shapes; however, it requires a 3D model that can efficiently reflect the changing features of the ground shape and provide soil type-dependent workload calculation and information on equipment for optimal management. Objects for earthwork have not yet been defined because the current BIM system does not provide them. The BIM technology commonly applied in the manufacturing center uses real-object data obtained through 3D scanning to generate 3D parametric solid models. 3D scanning, which is used when there are no existing 3D models, has the advantage of being able to rapidly generate parametric solid models. In this study, A method to generate 3D models for earthwork operations using reverse engineering is suggested. 3D scanning is used to create a point cloud of a construction site and the point cloud data are used to generate a surface model, which was then converted into a parametric model with 3D objects for earthwork