• 수산해양기술연구
• /
• 제51권2호
• /
• pp.235-244
• /
• 2015

The multi-frequency characteristics of anchovy schools were investigated using six acoustic lines collected at 38 and 120 kHz while a primary trawl survey was conducted from 14 April and 18 April of 2014 in off the coast of Tongyeong and Geo-je. Here, the frequency characteristics mean ${\Delta}MVBS$ that is the difference of Mean Volume Backscattering Strength at two frequencies. To use the characteristics effectively, the optimal cell size ($10{\times}2m$) was determined by examining several different cell sizes in consideration with the shapes of fish schools and the ${\Delta}MVBS$ pattern. By examining 6 histograms of ${\Delta}MVBS$, afternoon groups were occupied more in the ${\Delta}MVBS$ range of -6~-4 dB than that of -4~-2 dB, comparing to morning groups. The ${\Delta}MVBS$ range of the morning groups was between -16.9 dB and 11.6 dB, and that of the afternoon groups -16.7 dB and 13.0 dB. The average and standard deviation were $-3.9{\pm}3.6$ dB in the morning and $-4.1{\pm}3.4$ dB in the afternoon, suggesting that morning groups were 2 dB higher than afternoon groups. The ${\Delta}MVBS$ range of all anchovy schools regardless of morning and afternoon was between -16.9 dB and 13.0 dB, their average ${\Delta}MVBS$ was $-4.1{\pm}3.5$ dB. The characteristics can support to identify anchovy species in the waters where multiple fish species are distributed. It is hoped that this study presents the availability and benefit of acoustic data from a primary trawl survey.

• 복합신소재구조학회 논문집
• /
• 제5권3호
• /
• pp.17-22
• /
• 2014

Fiber reinforced plastic (FRP) structural shapes are readily available in civil engineering applications. Among many manufacturing techniques used for FRP structural shapes, pultrusion process is one of the most widely used techniques in civil engineering applications. Pultrusion is a manufacturing process for producing continuous lengths of reinforced polymeric plastic structural shapes with constant cross-section. Pultruded composites are attractive for structural applications because of their continuous mass production with excellent mechanical properties. This paper presents the results of investigations pertaining to the bolted connection with two bolts for the pultruded FRP (PFRP) structural members. PFRP bolted connection tests were conducted with end distance to bolt diameter ratio ($e_1/d_b$) and two types of bolt pattern such as horizontal (Pattern A) and vertical arrangement (Pattern B). As a result, it is found that the $e_1/d_b$ is recommended as the ratio of 4. In addition, it is also found that the bearing strengths at failure of the Pattern A and Pattern B have a similar value.

• 패션비즈니스
• /
• 제20권2호
• /
• pp.124-133
• /
• 2016

Currently the fashion industry is developing to create a novel culture due to the very sensitive and knowledge-oriented advancement of the IT industry. With fast turnover of information, consumers have come to have a more diverse desire for purchasing. Cubical expression techniques, which empathizes formativeness, can be a creative expression method adjusting into the trend of this era. Along with functional aspects of consumers, even in a textile manufacturing sector, new materials are required to meet sensitive and emotional aspects. Consumers' desire for new and creative designs and the development and adoption of new materials are essential to meet their emotions. The IT industry and fashion industry are forced to combine and a 3D apparel CAD system has been developed, enabling virtual clothing to be represented within a computer virtual space. All processes such as design, pattern creation, sewing and simulation are possible in 3D level. Digital clothing can shorten the production process time and is very effective in that it can reduce clothing waste generated during the sample production. This paper reviewed the works of Dutch designer, Iris van Herpen, who has developed formative designs. She tries to build, construct, and sculpt employing diversified materials other than soft textile materials, as shown in her series of fashion shows. The materials include films, 3D printed polymers, stiff and sheer organza, and artificial leather textiles. A few characteristics of her works have been selected in order to prepare patterns exhibiting the traits. The paper further focused on the physical features of the textile materials used to express similar techniques and its various forms were reviewed.

• 한국의류학회지
• /
• 제21권4호
• /
• pp.769-781
• /
• 1997

The purpose of this research is to show how to use the patternist's CAD system in order to make design patterns efficiantly. Using the PAD System Technologies company's PAD System Module, which is very officiant in designing patterns, the basic pattern or design pattern can be designed and applyed to the Sample Module, thus, then it could manufacture, retouch or choose a model, making it posible to go to the next level which is seam patterns for industrial use. By understanding the change of the design that is chosen through the design pattern making and Sample Module process', this study is presentated a plan on how to utilize the patternist's working adaption ability by the CAD system, and also considered the problems in using it. Ability of Design Confrontation of CAD System: 1) The result of an operation can be saved and retouched. On a saved list the patterns can be chosen and changed, thus, making it posible to complete a design very quickly. 2) When sewing every designed pattern in Sample Module, the model can be operated merely by selecting each sewing position, thus creating the same effect of a designer's muslin sample process in a much lesser time. Point at issue in the utilization CAD system: 1) When combining two darts into one place the amounts of darts that are already these have to be erasers, and then, the two darts points are moved that place, thus, containing them, which is very conplicated. 2) When making a gathering, because system can only be recognized in a opend line, the pattern should be separated in order to put a gathering inside a pattern. 3) In order to readjust the amounte of dart. The dart is erased first and then made new dart again. 4) When making tucks in a Sample Module, the form that gets narrow towards the pivot point can not be recognized so the sewing lines of the tucks is adjusted into parallel lines. 5) The Sample Module 3D operation can not attach the bodice to the shirts, instead they become fixed into each other. In the case of shoulder line tucks the amounts of pleats can not be expanded draperary naturally, thus, making it hard to showing the silhouette accurately. If these problems are solved, especially if the silhouette of a model can be created to have natural drapery in the 3D Module, models can be shown on the screen in possible to compare and examine even a change of a detail, by designing this 3D Module Production sample process will be more effective, thus, making the CAD system more useful in sewing design process.

• 열처리공학회지
• /
• 제31권2호
• /
• pp.63-67
• /
• 2018

Recent mold industry uses many roll-to-roll processes that can produce high production speed and precision machining and automation process. In the circular cylinder mold, however, patterns of less than $10{\mu}m$ are difficult to manufacture and maintain. In this study, we fabricated a circular cylindrical mold with a DLC thin film which have high hardness, low coefficient of friction and high releasability by using lithography and lift-off process. The height, line width, and pitch of the fabricated DLC macro pattern are $3.1{\mu}m$, $9.1{\mu}m$ and $20.2{\mu}m$, respectively. The pattern size is finer than the current applied to the aluminum cylinder type, and this shows the possibility of practical use of DLC micro pattern roll mold.

• 한국식품영양과학회지
• /
• 제24권4호
• /
• pp.636-641
• /
• 1995

Proteolytic activities were compared using three species involving in squid jeotkal fermentation and showing positive reaction upon casein test : Pseudomonas D2, Flavovacterium odoratum and Acinetobacter calcoaceticus. Pseudomonas D2 produced highest activity of protease at 72h when incubated in our own modified medium(polypeptone, 0.5% ; tryptone, 0.5% ; NaCl, 3% ; pH, 7.5). Thus, this specie was selected for the further study. The growth pattern was coincided with the production of protease. Thus purification of protease was proceeded by ethanol precipitation, sephadex G-100 gel filtration, and DEAE sepharose ion exchange chromatography. The purified protease showed highest activity at pH 7.0 and 5$0^{\circ}C$. The enzyme was very stable over the wide ragnes of the temperature ; even with one hour heat treatment at 7$0^{\circ}C$, the enzyme showed substantial amount of the activity toward casein. In addition, the enzyme was stable over the wide range of pH. Molecular weight of the protease was determined to be 17.4 kD by SDS-PAGE.

• 한국의류학회지
• /
• 제47권3호
• /
• pp.511-530
• /
• 2023

This study aims to analyze middle-aged men's frontal body shape asymmetry by measuring the left and right body dimensions and angles of 388 middle-aged men aged 40 to 59 using 3D body scan data and comparing the measured values. The study also compares the measured values of width, height, and angle and their relationships using Size Korea's anthropometric measurement and posture index of the New York Posture Rating Scale. The results confirm that the asymmetric shape characteristics of the upper and lower body appear differently. In addition, the asymmetrical characteristics between the upper and lower body differed, indicating that the close parts of the body affect each other. Similar to the difference in the left and right frontal body shapes and the average angle distribution, the asymmetrical upper and lower body characteristics also are found to be dissimilar when the correlations are examined. In contrast, there is no asymmetry in the width, height, and angle considering the age and BMI groups. Finally, the study classifies three body types and identifies their asymmetric characteristics. Overall, this study contributes primary data for further research on pattern production for asymmetric and unique body types and the development of customized apparel products.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권8호
• /
• pp.1069-1074
• /
• 2014

In China and South East Asia, the duck (common duck) is important in egg production for human consumption. Plumage color is a breed characteristic and of economic importance, together with egg production. Our aim in this study was to investigate the inheritance of plumage color in three Chinese indigenous egg-type duck breeds, Shan Ma (S), Putian White (F) and Putian black (P), and some of their crossbreds. These three breeds have different plumage color and are used in crossbreeding. The crossbred laying ducks $F{\times}(P{\times}S)$ and $F{\times}(S{\times}P)$ showed highly improved laying ability but heterogeneous plumage color. Genotypes at four relevant loci were investigated by studying down color and pattern in ducklings after crossbreeding. $F_1$ ducklings from the matings $F{\times}S$ and $S{\times}F$, $P{\times}S$, and $S{\times}P$ were classified into four classes of plumage color (the Shan Ma plumage color, black, white, or multicolored) over three generations. Parents were selected for the Shan Ma plumage color of their progeny. In the fourth generation, P male and P female ducks were selected according to the frequency of the desired class of plumage color (Shan Ma) of their $F_1$ progeny to obtain the so-called "Brown Putian Ma duck". The Shan Ma duck genotype was identified as having the restricted mallard color pattern ($M^RM^R$), full expression of any of the patterns or colors (CC), no extended black (ee) and no brown dilution D (D). The Putian White genotype was recessive white (cc), no extended black (ee) and no brown dilution D (D). The Putian Black genotype exhibited full expression of extended black (E gene) and no brown dilution (CCEE D [D]). It was shown that $F{\times}S$ and $S{\times}F$ tests should be implemented to eliminate the recessive white c allele in the S line and the dominant extended black E allele in the F line. It was also shown that the Brown Putian Ma obtained from Putian Black, with no extended black genotype (ee), could be used to get rid of the black plumage (E gene) in the crossbred ducks. This could provide a solution for producing 3-way crossbred ducks Putian $White{\times}$(Putian-$Ma{\times}Shan$ Ma) and Putian $White{\times}$(Shan $Ma{\times}Putian$-Ma), with the desired Shan Ma feather color.

• 복식문화연구
• /
• 제29권4호
• /
• pp.522-537
• /
• 2021

The purpose of this study is to develop a knitwear design with the potential for practical use through a combination of science and design by examining the concept and formative characteristics of fractal geometry and applying them to the development of 3D virtual clothing knitwear design. This study produced five main conclusions. First, the sub-concepts of "Repeatability," "Scale variability," and "complexity," which are based on self-similarity, appear together with simple regularity in the fractal formative characteristics shown in fashion design. Second, fashion fields apply fractal geometry in three-dimensional surface textures and optical textile patterns as a method of expression. Third, it was confirmed that various expressions can be created with fractal patterns by using the SDS-ONE APEX 3-4 design system; moreover, fractal patterns are a suitable design source for the development of Jacquard knitwear patterns. Fourth, in the development of knitted jacquard fractal patterns, by arranging the patterns in perspective, the effect of emphasizing or reducing the human body by optical illusion was shown. Fifth, a knit Jacquard structure with a pattern that exhibits fractal modeling characteristics and applying it to a 3D virtual clothing sample design reduces the time required for sample production while expanding the knit design's expression area and reducing costs. Thus, the clothing sample confirmed the effectiveness of practical knitwear design development.

• 인터넷정보학회논문지
• /
• 제20권1호
• /
• pp.39-46
• /
• 2019

This paper investigates the importance of various environmental factors that have a strong influence on strawberry yields grown in greenhouse using the pattern recognition methods. The environmental factors influencing the production of strawberries were six factors such as average inside temperature, average inside humidity, average $CO_2$ level, average soil temperature, cumulative solar radiation, and average illumination. The results of analyzing the observed data using Dynamic Time Warping (DTW) showed that the most significant factor influencing the strawberry production was average soil temperature, average inside humidity, and cumulative solar radiation. Second, the results of analyzing the observed data using Multidimensional Scaling (MDS) showed that the most influential factors on the strawberry yields, such as average $CO_2$ level, average inside humidity, and average illumination were differently given for each farms. However, these results are based on the distance in 3D space and can be deduced from the fact that there is not a large difference between these distances. Therefore, in order to increase the harvest of strawberries cultivated in the farms, it is necessary to manage the environmental factors such as thoroughly controlling the humidity and maintaining the concentration of $CO_2$ constantly by ventilation of the greenhouse.