• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1032-1039
• /
• 2022

In this paper, we designed and implemented a cavity bandpass filter combined with a cross-coupling equalizer structure to enhance Group delay for 5G mobile network repeater, which can replace the SAW (Surface Acoustic Wave) type bandwidth filter used in the existing mobile communication system. Using the 3D EM simulation tool (HFSS), the resonance frequency, the coupling coefficient between resonators, and external quality coefficient between resonators were calculated. Based on this, a 12th bandpass filter was constructed to have attenuation characteristics of more than 20dB at the edge end of both sides of the band with a metal cavity structure with a frequency band of 3500MHz to 3600MHz and bandwidth of 97.85MHz. The designed bandpass filter satisfies the group delay time requirement for the 5G mobile communication standard and the in-band and out-band frequency responses.

• Information and Communications Magazine
• /
• v.31 no.6
• /
• pp.3-11
• /
• 2014

Mobile operators today face yet another critical challenge as technology lifecycle becomes increasingly short and also as heterogeneous and complex network becomes exceedingly expensive and difficult to manage. With extremely competitive market and demanding users, the overall revenue structure is expected to get worse. A network architecture based on software-defined networking (SDN) and virtualization techniques gives operators greater opportunity to build cost-effective and efficient alternative to the legacy. In this work we review our Carrier Cloud as a future mobile network infrastructure that exploits both SDN and NFV in order to increase the operator agility, reduce the cost, and even disrupt the vendor landscape. This new architecture will not be fully adopted by the conservative operators at once. Technological hurdles have to be overcome, and a clear understanding of operational differences must be preceded.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.1
• /
• pp.80-86
• /
• 2002

A neural network structure which is able to perform the operations of analog addition and linear equation is proposed. The network employs Hopfkeld's model of a neuron with the connection elements specified on the basis of an analysis of the energy function. The analog addition network and linear equation network are designed by using Hopfield's A/D converter and linear programming respectively. Simulation using Pspice has shown convergence predominently to the correct global minima.

• Journal of the Korean Ceramic Society
• /
• v.38 no.6
• /
• pp.593-595
• /
• 2001

Zinc-phosphate glasses에 B$_2$O$_3$를 도입하여 borate, phosphate, boro-phosphate networks가 혼재되어 있는 highly cross-linked structures를 형성시켜 Phosphate glasses의 화학적 안정화를 검토하였다. Raman 측정 결과 B$_2$O$_3$와 P$_2$O$_{5}$는 잘 혼화된 polynary networks를 이루고 있으며, 이렇게 하여 증진된 구조적 cross-linking에 의하여 xB$_2$O$_3$.(1-x)Zn$_2$P$_2$O$_{7}$ glasses의 T$_{g}$, T$_{d}$는 증가하였고 동시에 CTE는 감소하는 결과를 가져왔다.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.554-557
• /
• 2013

This letter presents a power amplifier (PA) with an on-chip power detector for 2.4-GHz wireless local area network application. The power detector consists of a clamp circuit, a diode detector, and a coupled line directional coupler. A series inductor for an output matching network in the PA is combined with a through line of the coupler, which reduces the coupling level. Therefore, the coupler employs a metamaterial-based transformer configuration to increase coupling. The amount of coupling is increased by 2.5 dB in the 1:1 symmetric transformer structure and by 4.5 dB from two metamaterial units along the coupled line.

• Electrical & Electronic Materials
• /
• v.11 no.11
• /
• pp.1-8
• /
• 1998

This paper presents an arificial neuro-fuzzy technique based prtial discharge (PD) pattern classifier to power system application. This may require a complicated analysis method employ -ing an experts system due to very complex progressing discharge form under exter-nal stress. After referring briefly to the developments of artificical neural network based PD measurements, the paper outlines how the introduction of new emerging technology has resulted in the design of a number of PD diagnostic systems for practical applicaton of residual lifetime prediction. The appropriate PD data base structure and selection of learning data size of PD pattern based on fractal dimentsional and 3-D PD-normalization, extraction of relevant characteristic fea-ture of PD recognition are discussed. Some practical aspects encountered with unknown stress in the neuro-fuzzy techniques based real time PD recognition are also addressed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.648-656
• /
• 2007

This paper is about band pass filter, using Ceramics in the condition of center frequency 370Hz at milli-wave. The band pass filter is applied to Broadband Convergence Network, representing WLL(Wireless Local Loop) and LMDS(Local Multi-point Distribution Service). Sticking ceramic between strip line on a dielectric material substrate with which conductor's covers upper and basal surface, One will house the exterior by using structural resonance. In this Non Radiative Microstrip Line Filter structure, based upon simulations, generalized the two formulas finding resonant frequency of 1step ceramic resonator and bandwidth of 4step ceramic resonator. Also, As a result of experiment, using Network Analyzer, about created a experiment of structure based on the simulation result of 4-step ceramic resonator, It showed good characteristic of targeted bandwidth, comparing simulated result of 36.58GHz$\sim$37.650GHz with experimented result of 36.6GHz$\sim$37.65GHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1285-1290
• /
• 2012

People have been interested in the next generation media and service over 3D by development of 3D industry and generalization of 3D-related content and equipment in recent year. Many researchers predict that a strong candidate is digital hologram. Holographic technology is classified to capture(or generation), processing, and display(or reconstruction). This paper discusses the digital holographic display system using hybrid image pickup system and proposes a new structure of digital holographic display system. Through the proposed method a digital hologram can be scalably serviced according to display equipments with various resolutions, computing power of decoding part, and network bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.1
• /
• pp.35-45
• /
• 1991

Multi layer neural network using backpropagation learning algorithm is used to achieve identification and orientation estimation of different classes of aircraft in the variety of 3-D orientations. In-plane distortion invarient$(L,\;{\Phi})$ feature was extracted from each aircraft image to be used for training neural network aircraft classifier. For aircraft identification the optimum structure of the neural network classifier is studied to obtain high classification performance. Effective reductioin of learning time was achieved by using modified backpropagation learning algorithm and varying, learning parameters.

• Journal of the Korean Magnetic Resonance Society
• /
• v.9 no.2
• /
• pp.74-92
• /
• 2005

The high resolution solution structure of MCP-3 was determined using multinuclear, multidimensional NMR spectroscopy with an expressed and $^{13}C-\;and\;^{15}N-labeled$ protein. The MCP-3 has a typical chemokine fold including 3 anti-parallel $\beta-sheets$, and a C-terminal helix, but it exists as a monomer in solution under the conditions where the structure was determined (2 mM, pH 5.1 at $30^{\circ}C$). Based on the structure and the amino acid sequence compared to other chemokines we propose that Ile20 and Leu25 in MCP-3 play key roles in the formation of N-loop (residues between the $2^{nd}$ cysteine and the I sheet) which has been implicated as a determinant of chemokine specificity. Additional receptor binding surface is supplied by the 40s loop (residues between the 2 and the 3 sheet) and the binding interface of the acidic N-terminal region of chemokine receptor to MCP-3 would resemble the dimerization interface of CC type dimer.