• Journal of the Korean Electrochemical Society
• /
• v.15 no.4
• /
• pp.207-215
• /
• 2012

Soft carbons are prepared by heat-treatment of cokes with different amounts of phosphoric acid (2, 4.5, and 10 wt% vs. cokes) at $900^{\circ}C$ to be used as anode materials for lithium ion batteries. From electrochemical measurements combined with structural analyses, we confirm that abundant nano-pores are existed in the microstructure of soft carbons prepared with the phosphoric acid, which are responsible for further lithium ion storage. Significant increase in reversible capacity of soft carbon is attained in proportion to added amount of the phosphoric acid. We also demonstrate the effect of structural modification with phosphoric acid on electrochemical performance of soft carbon to elucidate the origin of additional capacity.

• Journal of The Korean Astronomical Society
• /
• v.53 no.1
• /
• pp.9-26
• /
• 2020

At q = 1.81 ± 0.20 × 10^-5, KMT-2018-BLG-0029Lb has the lowest planet-host mass ratio q of any microlensing planet to date by more than a factor of two. Hence, it is the first planet that probes below the apparent "pile-up" at q = 5-10 ×10^-5. The event was observed by Spitzer, yielding a microlens-parallax π_E measurement. Combined with a measurement of the Einstein radius θ_E from finite-source effects during the caustic crossings, these measurements imply masses of the host M_host = 1.14^+0.10_-0.12 M_⊙ and planet M_planet = 7.59^+0.75_-0.69 M_⊕, system distance D_L = 3.38^+0.22_-0.26 kpc and projected separation a_⊥ = 4.27^+0.21_-0.23 AU. The blended light, which is substantially brighter than the microlensed source, is plausibly due to the lens and could be observed at high resolution immediately.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.3
• /
• pp.351-359
• /
• 2015

Twelve multiparous Holstein dairy cows in mid-lactation were selected for a replicated $4{\times}4$ Latin square design with a $2{\times}2$ factorial arrangement to investigate the effects of corn and soybean meal (SBM) types on rumen fermentation, N metabolism and lactation performance in dairy cows. Two types of corn (dry ground [DGC] and steam-flaked corn [SFC]) and two types of SBM (solvent-extracted and heat-treated SBM) with different ruminal degradation rates and extents were used to formulate four diets with the same basal ingredients. Each period lasted for 21 days, including 14 d for adaptation and 7 d for sample collection. Cows receiving SFC had a lower dry matter (DM) and total N intake than those fed DGC. However, the milk yield and milk protein yield were not influenced by the corn type, resulting in higher feed and N utilization efficiency in SFC-fed cows than those receiving DGC. Ruminal acetate concentrations was greater and total volatile fatty acids concentrations tended to be greater for cows receiving DGC relative to cows fed SFC, but milk fat content was not influenced by corn type. The SFC-fed cows had lower ruminal ammonia-N, less urea N in their blood and milk, and lower fecal N excretion than those on DGC. Compared with solvent-extracted SBM-fed cows, cows receiving heat-treated SBM had lower microbial protein yield in the rumen, but similar total tract apparent nutrient digestibility, N metabolism measurements, and productivity. Excessive supply of metabolizable protein in all diets may have caused the lack of difference in lactation performance between SBM types. Results of the present study indicated that increasing the energy degradability in the rumen could improve feed efficiency, and reduce environmental pollution.

• Korean Journal of Community Nutrition
• /
• v.11 no.3
• /
• pp.346-360
• /
• 2006

This study was conducted to evaluate the effects of home-visiting nutrition education for the elderly with high fasting glucose level in an urban community. The study subjects were 40 elderly people, whose information on general characteristics, anthropometric measurement, biochemical indices, nutrition knowledge, nutrition attitude, dietary habit, food intake and nutrient intake were obtained at baseline. The education group received 6 weekly visits of home-visiting nutrition education from 15 March to 25 April 2004. In the baseline-survey, the education group and non-education group showed no differences in their general characteristics, health-related characteristics, anthropometric measurements, biochemical indices, nutrition knowledge, nutrition attitudes, dietary habits, and food and nutrient intake levels. The difference of mean change of nutrition knowledge, nutrition attitude and dietary habit after home-visiting nutrition education had been studied. The nutrition knowledge score increased by 1.4 in the education group; however, those in the non-education group which increased by 0.4, thus, the differences of mean change were statistically significant (p < 0.05). The nutrition attitude score increased by 1.2 in the education group; however, those in the non-education group decreased by 0.4, thus, the differences of mean change were statistically significant (p < 0.01). The dietary habit score increased by 1.7 in the education group; however, those in the non-education group decreased by 2.8, thus, the differences of mean change were statistically significant (p < 0.01). The difference of mean change of anthropometric indices and biochemical indices in education group and the non-education group was not significant. Looking over the zcereals and their products, vegetables, seaweeds, meats and their products, and fish than the non-education group. The MAR increased by 0.06 in the education group; however, that in the non-education group increased by 0.01, thus, the differences of mean change were statistically significant (p < 0.05). The differences of mean change of fasting blood glucose and biochemical indices after home-visiting nutrition education were studied. Fasting blood glucose decreased by 7.6 mg/dL in the education group; however, in the non-education group which increased by 0.4 mg/dL, the difference of mean change was not significant (p = 0.051). The above findings suggest that home visiting nutrition education increases the nutrition knowledge and nutrition attitude, as well as, it is effective to change dietary habits. If the education period is extended, not fasting blood glucose improvement was insignificant, but fasting blood glucose improvement ability could be found by changing dietary habits.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.341-354
• /
• 1995

Fluorescence characteristic and amino acids composition of organic matter were determined from extracted seawater samples at eight stations in the East Sea of Korea. Organic compounds have been extracted onto C-18 Sep-Pak cartridges. Three dimensional excitation/emission fluorescence contouring of extracts showed two markedly distinct characterized fluoroscopies representing protein-like biomacromolecule and humic-like geomacromolecule. Protein-like biomacromolecule showing fluorescence maxima at 280 nm/330 nm (excitation/emission) were abundant in the surface mixed layer and then apparently decreased below the thermocline at most stations. It suggests that source of biomacromolecule is comely related with vigorous biological synthetic activity in the surface layer and bacteria decompose its biologically labile components near the thermocline and in the deeper layer. On the other hand, humiliate geomacromolecule showing fluorescence maxima at 330 nm/430 nm (excitation/emission) were low in the surface mixed layer implying photochemical oxidation and then increased below the thermocline at most stations. It suggests that geomacromolecule might be transformed by condensation of bio-refractoryorganic fraction after decomposition of biomacromolecule and particulate organic carbon derived from the surface mixed layer. HPLC measurements of amino acids showed similar composition between seawater and extracted organic macromolecule after hydrolysis. Glycine, serine and alanine were predominant, accounting for more than 50% of total amino acids. Dissolved free amino acids of seawater were more abundant in the surface layer(0.7∼1.8 uM) than the deeper layer (0.2∼0.4 uM). D/L racemic ratio of alanine of extracted organic matter showed lower value in the surface layer than the deeper layer. It suggests that biomacromolecule predominant in the surface layer is relatively young, rapidly recycling and biologically labile.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.11-16
• /
• 1984

The backscattering cross sections of live fish and the probability density function of fish echoes were measured at side aspect. The measurements were made at 40 and 170 in KHz. The specimen fishes on the experiments were two catfish-total length of 16.8cm(L/λ is about 4.5, where the L is length, the λ is the sound wavelength) and 23cm(L/λ, ~6.1), a carp(Cyprinus carpio) of 17.5cm(L/λ, ~4.7), a Telapia(Tilapia mossambica)of 19.5cm(L/λ, ~5.2) and several fishes. Those lengths ranged from 10.7 to 24.0cm. The results of the measured maximum backscattering cross sections were 5.62$\times$10 super(-5) to 7.23$\times$10 super(-4) m super(2). Huang and clay reported that, when the fish was moving gently, the probaiblity density function of the fish echces was approximately the same with the Rayleigh probability density function. Thereafter Ehrenberg et al. also reported that the Rayleigh probability density function on fish was performed at the critical acoustic length ratio or more in theoretical base. Recently Dahl and Mathisen tested the Rayleigh probability density function on fish when the fish-length-to-wavelength ratios were greater than 100. In this paper the experimental result was also not accorded with the Rayleigh probability density function when the fish-length-to-wavelength rations were lower than the critical ratio.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.5-6
• /
• 2002

The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

• Geophysics and Geophysical Exploration
• /
• v.10 no.3
• /
• pp.203-210
• /
• 2007

As a part of basic studies on monitoring of landslides and slope stability using SP measurements, micro-electric potentials of rock samples were measured accompanied with the rock failure by a uniaxial loading test were measured. The measurement system consists of a 8 channel A/D converter with 24 bit resolution, uniaxial loading tester, strain gages and 4 sets of electrode attached to a rock sample. Rock samples of granite, limestone, and sandstone were tested. Also, mortar samples were tested in order to monitor electric-potentials of a uniform sample. Micro-electric potentials were detected in all saturated samples and the strength of them increased as the loading force increased. Sandstone samples showed the largest strength of micro-electric potential and it followed limestone and granite samples, which indicates a positive relationship with porosity of rocks. The mechanism generating these micro-electric potential can be explained in terms of electro-kinetics. In case of dry samples, micro-electric potential could be observed only in sandstone samples, where piezoelectric effect played main role due to high contents of quartz in sandstone samples. We found that biggest micro-electric potentials were observed at the electrodes near the crack surface of rock samples. This is very encouraging result that SP monitoring can be applied to predicting landsliding or to estimate collapsing position combining with monitoring of acoustic emissions.

• Journal of electromagnetic engineering and science
• /
• v.1 no.1
• /
• pp.73-77
• /
• 2001

We studied the fabrication of GaAs-based pseudomorphic high electron mobility transistors(PHEMT`s) for the purpose of millimeter- wave applications. To fabricate the high performance GaAs-based PHEMT`s, we performed the simulation to analyze the designed epitaxial-structures. Each unit processes, such as 0.1 m$\mu$$\Gamma$-gate lithography, silicon nitride passivation and air-bridge process were developed to achieve high performance device characteristics. The DC characteristics of the PHEMT`s were measured at a 70 $\mu$m unit gate width of 2 gate fingers, and showed a good pinch-off property ($V_p$= -1.75 V) and a drain-source saturation current density ($I_{dss}$) of 450 mA/mm. Maximum extrinsic transconductance $(g_m)$ was 363.6 mS/mm at $V_{gs}$ = -0.7 V, $V_{ds}$ = 1.5 V, and $I_{ds}$ =0.5 $I_{dss}$. The RF measurements were performed in the frequency range of 1.0~50 GHz. For this measurement, the drain and gate voltage were 1.5 V and -0.7 V, respectively. At 50 GHz, 9.2 dB of maximum stable gain (MSG) and 3.2 dB of $S_{21}$ gain were obtained, respectively. A current gain cut-off frequency $(f_T)$ of 106 GHz and a maximum frequency of oscillation $(f_{max})$ of 160 GHz were achieved from the fabricated PHEMT\\`s of 0.1 m$\mu$ gate length.h.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.105-127
• /
• 1999

Application of the soil nailing method is continuously extended in maintaining stable excavations and slopes. Occasionally, however, ground anchor support system may not be used because of space limitations in urban excavation sites nearby the existing structures. In this case, soil nailing system with relatively short length of nails could be efficiently adopted as an alternative method. The general soil nailing support system, however, may result in excessive deformations particularly in an excavation zone of the existing weak subsoils. Pretensioning the soil nails then, could play important roles in reducing deformations mainly in an upper part of the nailed-soil excavation system as well as improving local stability. In the present study, the analytical procedure and design technique are proposed to evaluate maximum pretension force and stability of the pretensioned soil nailing system. Also proposed are techniques to determine the required thickness of a shotcrete facing and to estimate probability of a failure against the punching shear. The predicted results are compared with the limited measurements obtained from the excavation site constructed by using the pretensioned soil nails. Based on the proposed procedure and technique, effects of the radius of a influence circle and dilatancy angle on the thickness of a shotcrete facing, bonded length and safety factors are analyzed. In addition, effects of the reduction of deformations expected by pretensioning of the soil nails are examined in detail throughout an illustrative example and FLAC$^{2D}$ program analysis.s.