• 벤처혁신연구
• /
• 제2권1호
• /
• pp.1-11
• /
• 2019

다양한 연구기관에서 4차 산업혁명을 이끌 핵심기술로 AI, IoT, Blockchain 등의 기술과 더불어 3D 프린팅 기술을 들고 있다. 3D 프린팅은 전통적인 생산방식인 subtractive manufacturing(SM)과는 대조적으로 additive manufacturing(AM)으로 그 영향력이 매우 커 혁명이라는 용어를 사용하기도 한다. 이에 본 연구에서는 3D 프린팅 산업의 특성을 경제 관점, 생산 관점, 마케팅 관점에서 전통적인 방식과 비교하여 분석하였다. 이후 비즈니스 생태계 구축 측면에서 쟁점을 분석하였다. 끝으로 향후 연구를 위한 아젠더를 제시하였다. 본 연구는 실무적으로는 3D 프린팅을 둘러싼 핵심적인 이슈 파악 및 향후 적용을 위한 단초를 제공하였다. 학문적으로는 기존의 연구 이슈에 대해 쟁점을 정리함으로써 향후 연구를 위한 틀을 제시하였다. 향후 연구에서는 이러한 논의를 토대로 실제 사례를 중심으로 실증적인 분석이 뒷받침될 필요가 있다.

• 한국CDE학회논문집
• /
• 제21권3호
• /
• pp.215-223
• /
• 2016

The low price around 1000 USD makes consumer 3D printers as a new additive manufacturing platform for the personal manufacturing where consumers can make and sell their own products. To allow the consumers to design and manufacture their products, not only economic 3D printers but also supporting information systems for their design and manufacturing are essential. This study suggests an extended product data management (PDM) system that can support both the design and manufacturing of personal products with consumer 3D printing services. This extended PDM system helps consumer designers use advanced PDM technologies for their design and connected 3D printing services with Internet of Things (IoT) technology for realization of their products. As a result, the proposed system supports the consumer designers a seamless integrated product development and manufacturing environment supported by PDM and consumer 3D printing services.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.15-20
• /
• 2015

After the US government declared 3D printing technology a next-generation manufacturing technology, there have been many practical studies conducted to expand 3D printing technology to manufacturing technologies, called AMERICA MAKES. In particular, the Keck Center, located at the University of Texas at El Paso, has studied techniques for easily combing the 3D stacking process with space mobility and expanded these techniques to simultaneous staking techniques for multiple materials. Additionally, it developed convergence manufacturing techniques, such as direct inking techniques, in order to produce a module structure that combines electronic circuits and components, such as CUBESET. However, in these studies, it is impossible to develop a unified system using traditional independent through simple sequencing connections. This is because there are many problems in the integration between the stacking modeling of 3D printers and post-machining, such as thermal deformations, the precision accuracy of 3D printers, and independently driven coordinate problems among process systems. Therefore, in this paper, the integration method is suggested, which combines these 3D printers and subsequent machining process systems through an Internet-based cloud. Additionally, the sequential integrated system of a 3D printer, an NC milling machine, machine vision, and direct inking are realized.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
• /
• pp.198-202
• /
• 2008

대규모 3D 컴퓨터애니메이션의 제작공정은 제작기술의 발전과 예산의 대규모화로 인해 그 구조가 더욱 복잡화, 세분화, 되고 있으며, 프로덕션타입, 제작규모, 제작방식과 같은 유형에 따라 제작 파이프라인의 형태가 다양하게 변화되고 있다. 하지만, 소규모 제작업체에서는 제작 파이프라인의 개념과 그 구성에 대한 변화와 발전이 미비하여 이에 대한 재조명이 필요할 때이다. 이러한 연구의 배경을 주목하여 본 연구는 국내 소규모 3D애니메이션의 제작 파이프라인에 대한 이해를 돕고, 소규모 국내 프로덕션 실정에 맞는 3D애니메이션 제작 파이프라인의 구성 방안을 모색 하고자하는데 그 목적을 가진다. 본 연구에서 제시하는 소규모 3D애니메이션의 제작 파이프라인 구성 모델과 방법론은 프로젝트의 성향이나 주변 환경에 따라 충분히 변화 가능한 것이기 때문에 절대적인 것만은 아니며, 3D 컴퓨터애니메이션 제작 파이프라인의 구성을 위해서는 그 목적을 충분히 이해하고, 프로덕션내의 작업자간의 정보의 공유가 충분히 이루어질 수 있도록 소규모 프로덕션의 환경을 고려하여 상황에 맞추어 구성 할 수 있는 방법이 될 것이라고 생각한다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.235-240
• /
• 2008

PSC box girder bridges are built through the repetitive manufacturing process of concrete segment. However, during the initial segment manufacturing stage, design change may occur frequently due to design errors and interferences between components, resulting in the extension of segment manufacturing period. This paper aims to verify the manufacturing process of PSC box girder segment by 3D simulation technique. All the components of a segment were modelled and assembled by simulation technique and then, some design errors were found and revised appropriately to optimize the manufacturing process of segment. Consequently, 3D simulation technique would be promising to improve the quality of the segment and to reduce its manufacturing time and cost.

• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.100-107
• /
• 2017

3D printing is a technology that converts a computer-generated 3D model into a real object with additive manufacturing technology. A majority of 3D printing technologies uses one material, and this is considered a limitation. In this study, we developed a multi-material 3D printer by adopting dual resin vat and cleaning system with DLP (Digital Light Processing) 3D printing technology. The developed multi-material DLP 3D printer is composed of a manufacturing system, cleaning system, transporting system, and automatic resin recharging system. Various 3D structures were 3D printed with two materials, thus demonstrating the potential. Printing performance of the multi-material DLP 3D printer was studied by performing a comparative surface roughness test and tension test on specimens composed of one material as well as those composed of two materials.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.9-15
• /
• 2017

In hot forming process, the dies in which excessive worn or crack occurs is reused after repair. Generally hot forming dies are recycled through a welding repair method. Welding repair methods are highly dependent on the skills of engineer. It causes process defects such as dimensional defects and structural defects. Recently, the metal 3D printing method has been applied to the repair of used dies. The aim of this study is to evaluate the wear characteristics of AISI H13 tool steel repaired by 3D printing method. Three kinds of wear specimens were fabricated by using 3D printing, welding, and initial material. A pin-on-disk wear test was carried out to evaluate the wear characteristics. From the result of wear test, the wear characteristics of 3D printing method was superior to that of the welded material, and was similar to that of the initial material.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.1-8
• /
• 2022

Fused deposition modeling (FDM), based on stacking a continuous filament of polymer or composite materials, is well matured and is thus widely used in additive manufacturing technology. To advance FDM-based 3D printing technology, the mechanical properties of additively manufactured composite materials must be improved. In this study, we proposed a novel FDM 3D printing process using metal wire-polymer composites, enabling enhanced mechanical properties. In addition, we developed a new type FDM filament of copper wire wrapped in nylon material for stable 3D printing without thermal damage during the printing process. After FDM printing of the copper wire-nylon composite filament, we conducted a tensile test to investigate the mechanical behavior of the printed composite materials. The experimental results confirmed that the tensile strength of the 3D-printed metal wire-polymer composites was higher than that of the conventional single polymer material. Thus, we expect that the FDM printing process developed in this study may be promising for high-load-bearing applications.

• 한국압력기기공학회 논문집
• /
• 제17권2호
• /
• pp.75-82
• /
• 2021

The 3D printing technology is one of the fourth industrial revolution technology that drives innovation in the manufacturing process, and should be applied to nuclear industry for various purposes according to the manufacturing trend change. In nuclear industry, it can be applied to manufacture obsolete items and new designed parts in advanced reactors or small modular reactors (SMRs), replacing the traditional manufacturing technologies. A gate valve body was manufactured, which was obsolete in nuclear power plant, using DED(Directed Energy Deposition) metal 3D printing technology after restoring design characteristics including 3D design drawing by reverse engineering. The 3D printed valve body was assembled with commercial parts such as seat-ring, disk, stem, and actuator for performance test. For the valve assembly, including 3D printed valve body, several tests were performed, including pressure test, end-loading test, and seismic test according to KEPIC MGG and KEPIC MFC. In the pressure test, hydraulic pressure of 391kgf/cm² was applied to 3D printed valve body, and no leak was detected. Also the 3D printed valve assembly was performed well in end-loading and seismic tests.

• Design & Manufacturing
• /
• 제11권1호
• /
• pp.30-33
• /
• 2017

In this study, the mold technology for manufacturing of porous implant was investigated. Firstly, we considered the concept of insert molding technology with 3D printing of porous inert part. The part on implant was designed in the end region of the implant. And then main implant bodies were manufactured using conventional machining method. The other porous parts were designed and optimized with molding simulation. As the feature size of porous implant was so small that perfect feature of it using 3D printing technology could not be obtained. So, we proposed another scheme for manufacturing of the porous implant in the replace of the former approach. Polymer mold cores with 3D printing technology were considered. The effects of addictive manufacturing process parameters on the properties of mechanical and dimensional accuracy were investigated. Direct 3D printed polymer mold cores were designed and manufactured under the simulation of thermal and molding analysis. It was shown that 3D printed mold core with polymer could be adapted to the injection molding for porous implant.