• International Journal of Computer Science & Network Security
• /
• v.23 no.1
• /
• pp.169-186
• /
• 2023

The research aimed to identify the effectiveness of an educational program using 3D glasses as a technological innovation on academic achievement and attitude towards elearning in science in the preparatory stage. The research relied on the analytical descriptive approach and the semi-experimental approach. The research tools were the achievement test and the scale of attitude towards e-learning. An educational program was designed and produced using 3D glasses. The study sample consisted of 60 students from the second grade in the preparatory stage at the Rural Jeddah School. The research concluded to the following results: There was a satistically sigificant difference at the level of sig. (0.05) among the -mean scores of the experiemtal and control group students in the post assessment atthe level of achievement in favor of the experiemental group and therewas a satistically sigificant difference at the level of sig. (0.05) among mean scores of the experiemtal and control group students in the post assessment at the level of attitude towards e-learning in favor of the experiemental group. And it was found that the positive effect of the 3D educational program for improving the level of achievement and the attitude towards e-learning for the students. The program allowed the experimental group students to practice self-learning, interaction, and achievement according to the individual differences among them.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.329-332
• /
• 2006

To study the effect of the macroscopic TVLEM(Three Vertical Line Element Model) which is developed in 2D, a bearing wall system is selected and 2D and 3D pushover analyses are carried out. In 2D model, the participating width of a flage wall to lateral resistance is modelled based on Paulay's effective width. From the comparisons of roof displacements, 2D model which uses the effective width of flange wall has better prediction and less analysis time than 3D model which has intrinsically the full width of the flange that causes higher stiffness and strength and shorter deformation capacity than 2D model.

• Geophysics and Geophysical Exploration
• /
• v.13 no.4
• /
• pp.397-406
• /
• 2010

Resistivity method is a practical and effective geophysical technique to detect leakage zones in embankment dams. Generally, resistivity survey conducted along the crest assumes that the embankment dam has a 2D structure. However, the 3D topography of the embankment distorts significantly resistivity data measured on anywhere of the dam. This study evaluates the influence from 3D effects created by specific dam geometry and effects of water level fluctuations through the 3D finite element modeling technique. Also, a comparison between different locations of survey line are carried out, and topographic correction technique is developed for the resistivity data obtained along the embankment dam. Furthermore, using synthetic resistivity data for an embankment dam model with leakage zone, detectability of leakage zones is estimated through 2.5D inversion.

• Journal of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.23-31
• /
• 1977

For the metal complex of $d^1$ configuration with the octahedrally coordinated ligands, the crystal field parameter, 10Dq, is calculated from first principles within the framework of the crystal field theory. With the point charge model, the configuration interaction is introduced by use of the Shull-L$\"{o}$wdin functions. Through the Integral Hellmann-Feynman Theorem, the higher order effect is visualized. It is found that the higher order effect on 10Dq is about $50{\%}$ of the first order effect. Since 3d function is angularly undistorted and radially equally distorted in $E_g\;and\;T_{2g}$ states, due to the octahedral potential, the calculated 10Dq is still the unique parameter for the splitting.

• Journal of the Korea Computer Graphics Society
• /
• v.4 no.1
• /
• pp.67-77
• /
• 1998

In this paper we describe a development of a multi user game using 3D graphics and multicasting. First, we represent a virtual reality world by 3D graphics technology. Next, we use computer communication technology for the purpose of interaction among multi users. As a result, multi users share 3D graphics objects and play games. The goal of this paper is a development of a system that enables multi users to play games sharing a virtual world represented by 3D graphics. We use the OpenInventor library and C++ language for 3D graphics scene representation, and IP multicasting protocols for computer communication. The system allows to use Polhemus Fastrak 3D input device that recognizes the 3D position and 3D orientation. As an example we present a game that demonstrates the effect of piano concert by multi piano players who are distributed in a computer network.

• Ocean Systems Engineering
• /
• v.6 no.3
• /
• pp.245-264
• /
• 2016

The iterative boundary element method (IBEM) developed originally before for cavitating two-dimensional (2-D) and three-dimensional (3-D) hydrofoils moving under free surface is modified and applied to the case of 2-D (two-dimensional) airfoils and 3-D (three-dimensional) wings over water. The calculation of the steady-state flow characteristics of an inviscid, incompressible fluid past 2-D airfoils and 3-D wings above free water surface is of practical importance for air-assisted marine vehicles such as some racing boats including catamarans with hydrofoils and WIG (Wing-In-Ground) effect crafts. In the present paper, the effects of free surface both on 2-D airfoils and 3-D wings moving steadily over free water surface are investigated in detail. The iterative numerical method (IBEM) based on the Green's theorem allows separating the airfoil or wing problems and the free surface problem. Both the 2-D airfoil surface (or 3-D wing surface) and the free surface are modeled with constant strength dipole and constant strength source panels. While the kinematic boundary condition is applied on the airfoil surface or on the wing surface, the linearized kinematic-dynamic combined condition is applied on the free surface. The source strengths on the free surface are expressed in terms of perturbation potential by applying the linearized free surface conditions. No radiation condition is enforced for downstream boundary in 2-D airfoil and 3-D wing cases and transverse boundaries in only 3-D wing case. The method is first applied to 2-D NACA0004 airfoil with angle of attack of four degrees to validate the method. The effects of height of 2-D airfoil from free surface and Froude number on lift and drag coefficients are investigated. The method is also applied to NACA0015 airfoil for another validation with experiments in case of ground effect. The lift coefficient with different clearance values are compared with those of experiments. The numerical method is then applied to NACA0012 airfoil with the angle of attack of five degrees and the effects of Froude number and clearance on the lift and drag coefficients are discussed. The method is lastly applied to a rectangular 3-D wing and the effects of Froude number on wing performance have been investigated. The numerical results for wing moving under free surface have also been compared with those of the same wing moving above free surface. It has been found that the free surface can affect the wing performance significantly.

• Geophysics and Geophysical Exploration
• /
• v.11 no.4
• /
• pp.286-301
• /
• 2008

When magnetotelluric (MT) data are obtained in vicinity of the coast, the sea can distort observed MT responses, especially those of deep part of subsurface. We introduce an iterative method to correct the sea effect, based on the previous topographic correction method which removes the distortions due to topographic changes in seafloor MT data. The method first corrects the sea effect in observed MT impedance, and then inverts corrected responses in a model space without the sea. Due to mutual coupling between sea and subsurface structure, the correction and inversion steps are iterated until changes in each result become negligible. The method is validated for 1-D and 2-D structure using synthetic MT data produced by 3-D forward modeling including surrounding seas. In all cases, the method closely recovers the given structure after a few iterations. To test the applicability of the proposed method to field data, we generate synthetic MT data for the Jeju Island whose 1-D conductivity structure is well known, using 3-D forward modeling. The distortions due to the surrounding sea start to appear below the frequency about 1 Hz, and are relatively severe in the electrical field perpendicular to the coastline because of the location of the observation sites. The proposed method successfully eliminates the sea effect after three iterations, and both 1-D and 2-D inversion of corrected responses closely recover the given subsurface structure of the Jeju Island model.

• Biomolecules & Therapeutics
• /
• v.29 no.3
• /
• pp.290-294
• /
• 2021

Extracellular beta amyloid (Aβ) plaques are the neuropathological hallmarks of Alzheimer's disease (AD). Accordingly, reducing Aβ levels is considered a promising strategy for AD prevention. 3'-O-acetyl-24-epi-7,8-didehydrocimigenol-3-O-β-D-xylopryranoside significantly decreased the Aβ production and this effect was accompanied with reduced sAPPβ production known as a soluble ectodomain APP fragment through β-secretases in HeLa cells overexpressing amyloid precursor proteins (APPs). This compound also increased the level of sAPPα, which is a proteolytic fragment of APP by α-secretases. In addition, 3'-O-acetyl-24-epi-7,8-didehydrocimigenol-3-O-β-D-xylopryranoside decreased the protein level of β-secretases, but the protein levels of A disintegrin and metalloproteinase (ADAM) family, especially ADAM10 and ADAM17, are increased. Thus, 3'-O-acetyl-24-epi-7,8-didehydrocimigenol-3-O-β-D-xylopryranoside could be useful in the development of AD treatment in the aspect of amyloid pathology.

• Molecular & Cellular Toxicology
• /
• v.4 no.2
• /
• pp.93-99
• /
• 2008

Human cyclin D3 gene (CCND3) located on 6p21.1 is important for the regulation of the G1-S phase transition of the cell cycle by modulating the activity of the cyclin-dependent kinases Cdk4 and Cdk6. Because little is known about the effect of cyclin D3 in various human cancers, we evaluated the intricate relationship between expression of cyclin D3 and the process of HCC development using immunohis tochemistry and TUNEL assay on 43 paraffin embedded tissues. Cyclin D3 immunoreactivity was more frequently observed in the tumors with high histologic grade and the tumors with metastasis, and more frequently expressed in HCCs with cirrhotic background and gain of 6p21.1 when compared with those with non-neoplastic tissue. Apoptotic cells were more common in tumor with cirrhotic background, amplification of 6p21.1 and expression of cyclin D3 when compared with HCCs with lower level of cyclin D3 expression. Also, we observed that some of the cyclin D3 positive cell and apoptotic cell were co-localized. From these results, it is suggested that over-expression of cyclin D3 may contribute to more rapid cell turn-over in the background of HCC, and balance between proliferation and apoptosis is a role in the progression of HCC with cirrhotic background.

• ETRI Journal
• /
• v.34 no.3
• /
• pp.388-398
• /
• 2012

Three-dimensional (3D) memories using through-silicon vias (TSVs) will likely be the first commercial applications of 3D integrated circuit technology. A 3D memory yield can be enhanced by vertical redundancy sharing strategies. The methods used to select memory dies to form 3D memories have a great effect on the 3D memory yield. Since previous die-selection methods share redundancies only between neighboring memory dies, the opportunity to achieve significant yield enhancement is limited. In this paper, a novel die-selection method is proposed for multilayer 3D memories that shares redundancies among all of the memory dies by using additional TSVs. The proposed method uses three selection conditions to form a good multi-layer 3D memory. Furthermore, the proposed method considers memory fault characteristics, newly detected faults after bonding, and multiple memory blocks in each memory die. Simulation results show that the proposed method can significantly improve the multilayer 3D memory yield in a variety of situations. The TSV overhead for the proposed method is almost the same as that for the previous methods.