• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.308-309
• /
• 2018

Construction automation is needed to improve construction productivity. 3D printing is a key technology of the 4th industrial revolution, and when applied to the construction field, the ripple effect is very large. In this paper, we propose a 3D printing method that can predict the 3D printing process and estimate the construction duration for each process. Through literature review and expert consultation, eight 3D printing activities for structure work were derived. Construction duration and cost estimation for each activity will be needed in the future research.

• Current Optics and Photonics
• /
• v.4 no.6
• /
• pp.545-550
• /
• 2020

We propose a hole-filling method to solve discontinuous depth representation and to reduce the visible seams and cracks that cause the limitation of the viewing angle of the three-dimensional (3D) image in the multilayer type 3D display system. The occlusion and the disocclusion regions between layers, such as the visible seams and cracks, are a major bottleneck of the multilayer type 3D display system to represent a volumetric 3D image by stacking multiple images. As a result, in the reconstructed 3D image, the visible seams and cracks appear as brighter overlapping and undesirable cut-off. In order to resolve the problems above, we applied the depth-fused effect to the sub-depth map generating algorithm and improve the viewing characteristics of the multilayer type 3D display. The experimental demonstrations are also provided to verify the proposed scheme.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.276-279
• /
• 2003

The superconducting synchronous machine(S.S.M) including generator and motor has different electromagnetic structure from the conventional machine. With the help of superconductor having much higher operating current density than normal conductor, S.S.M can eliminate most of iron core filling inside of the conventional machine. This air-cored structure could be analysed and designed theoretically based on 2-dimensional(2-D) magnetic field distribution assuming that the windings are extended infinitely toward the axial direction. However the actual structure of S.S.M has the end regions interconnecting the straight parts of the same cross-section with the 2-D model. Therefore, this actual 3-D model has smaller field distribution than the 2-D model. In this paper, we consider the effect of the end regions on the output of a HTS model motor and suggest more accurate design approach through comparison of 2-D and 3-D magnetic field analysis.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.293-299
• /
• 2023

In recent years, with the rapid development of real-time rendering technology, the quality of the images produced by real-time rendering has been improving, and its application scope has been expanded from games to animation and advertising and other fields. This paper analyses the development status of real-time rendering technology in 3D animation by investigating the 3D animation market in China, which concludes that the number of 3D animations in China has been increasing over the past 20 years, and the number of 3D animations using real-time rendering has been increasing year by year and exceeds that of 3D animations using offline rendering. In this study, a real-time rendering and offline rendering 3D animation are selected respectively to observe the screen effect of characters, special effects and environment props, and analyse the advantages and disadvantages of the two rendering technologies, and finally conclude that there is not much difference between real-time rendering 3D animation and offline rendering 3D animation in terms of quality and the overall sense of view, and due to the real-time rendering of the characteristics of the WYSIWYG, the animation designers can better focus on the creation of art performance. Real-time rendering technology has a good development prospect and potential in 3D animation, which paves the way for designers to create 3D content more efficiently.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.4
• /
• pp.473-481
• /
• 2012

For a mesa-isolated small geometry SOI MOSFET, the potentials in the silicon film, front, back, and side-wall oxide layers can be derived three-dimensionally. Using Taylor's series expansions of the trigonometric functions, the derived potentials are written in terms of the natural length that can be determined by using the derived formula. From the derived 3-D potentials, the minimum values of the front and the back surface potentials are derived and used to obtain the closed-form expressions for the front and back gate threshold voltages as functions of various device parameters and applied bias voltages. Obtained results can be found to explain the drain-induced threshold voltage roll-off and the narrow width effect of a fully depleted small geometry SOI MOSFET in a unified manner.

• YAKHAK HOEJI
• /
• v.40 no.3
• /
• pp.340-342
• /
• 1996

To investigate the antialopecic effect of N-4-salicylomide-2-amino-6-piperidinopyrimidine 3-oxide(SALMI) and its salt on the hair of black mouse (C57BL/6), this study was carrie d out. When salmi and its salt in ethanol solution were administered to the black mouse (C57BL/6) by route of skin, both of them promoted the growth of hair.

• Structural Engineering and Mechanics
• /
• v.70 no.5
• /
• pp.571-589
• /
• 2019

This paper aims to develop a quasi-3D shear deformation theory for the study of bending, buckling and free vibration responses of functionally graded (FG) sandwich thick plates. For that, in the present theory, both the components of normal deformation and shear strain are included. The displacement field of the proposed model contains undetermined integral terms and involves only four unknown functions with including stretching effect. Using Navier's technique the solution of the problem is derived for simply supported sandwich plate. Numerical results have been reported, and compared with those available in the open literature were excellent agreement was observed. Finally, a detailed parametric study is presented to demonstrate the effect of the different parameters on the flexural responses, free vibration and buckling of a simply supported sandwich plates.

• Structural Engineering and Mechanics
• /
• v.78 no.4
• /
• pp.439-453
• /
• 2021

In this work, quasi three-dimensional (quasi-3D) shear deformation theory is presented for bending and dynamic analysis of functionally graded (FG) plates. The effect of varying material properties and volume fraction of the constituent on dynamic and bending behavior of the FG plate is discussed. The benefit of this model over other contributions is that a number of variables is diminished. The developed model considers nonlinear displacements through the thickness and ensures the free boundary conditions at top and bottom faces of the plate without using any shear correction factors. The basic equations that account for the effects of transverse and normal shear stresses are derived from Hamilton's principle. The analytical solutions are determined via the Navier procedure. The accuracy of the proposed formulation is proved by comparisons with the different 2D, 3D and quasi-3D solutions found in the literature.

• Structural Engineering and Mechanics
• /
• v.66 no.3
• /
• pp.317-328
• /
• 2018

In this paper, a new refined quasi-three-dimensional (3D) shear deformation theory for the bending analysis of functionally graded plate is presented. The number of unknown functions involved in this theory is only four against five or more in the case of the other shear and normal deformation theories. Due to its quasi-3D nature, the stretching effect is taken into account in the formulation of governing equations. In addition, the effect of different micromechanical models on the bending response of these plates is studied. Various micromechanical models are used to evaluate the mechanical characteristics of the FG plates whose properties vary continuously across the thickness according to a simple power law. The present theory accounts for both shear deformation and thickness stretching effects by a parabolic variation of displacements across the thickness, and the zero traction boundary conditions on the top and bottom surfaces of the plate without using shear correction factors. The problem is solved for a plate simply supported on its edges and the Navier solution is used. The results of the present method are compared with others from the literature where a good agreement has been found. A detailed parametric study is presented to show the effect of different micromechanical models on the flexural response of a simply supported FG plates.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.2
• /
• pp.153-162
• /
• 2016

In this study, we investigated the moisturizing effects of collagen extract from jellyfish. The mositurizing effects were measured by the caspase 14 expression, filaggrin, hyaluronan synthase-3 (HAS-3), aquaporin-3 (AQP-3) and desmocollin (DSC). As a results, effect of caspase 14 mRNA expression of collagen extract are similar to that of retinoic acid (RA) which is a reference control. And the collagen extract showed inhibitory of filaggrin, HAS-3, AQP-3 and DSC mRNA expression of 211.7%, 139.9%, 212.5% and 116.8% respectively, at the concentration of 2%. Therefore, our study suggested that jellyfish collagen extract has considerable potential as a cosmetics ingredient with moisturizing effect.