• Progress in Medical Physics
• /
• v.12 no.2
• /
• pp.185-191
• /
• 2001

The virtual compensator which are realized using a multileaf collimator(MLC) and three-dimensional radiation therapy Planning(3D RTP) system was designed. And the feasibility study of the virtual compensator was done to verify that it can do the function of the conventional compensator properly. As a model for the design of compensator, styrofoam phantom and mini water phantom were prepared to simulate the missing tissue area and the calculated dose distribution was produced through the 3D RTP system. The fluence maps which are basic materials for the design of virtual compensator were produced based on the dose distribution and the MLC leaf sequence file was made for the realization of the produced fluence map. Ma's algorithm were applied to design the MLC leaf sequence and all the design tools were programmed with IDL5.4. To verify the feasibility of the designed virtual compensator, the results of irradiation with or without a virtual compensator were analyzed by comparing the irradiated films inserted into the mini water phantom. The higher dose area produced due to the missing tissue was removed and intended regular dose distribution was achieved when the virtual compensator was applied.

• Food Science and Biotechnology
• /
• v.18 no.1
• /
• pp.162-166
• /
• 2009

This study evaluated glucose effect on Listeria monocytogenes survival under gamma irradiation and NaCl stress. L. monocytogenes in phosphate buffered saline (PBS) plus glucose (0-4%) was treated with gamma irradiation (0-0.5 kGy), and the samples were then exposed to NaCl (0-9%) in tryptic soy agar plus 0.6% yeast extract. $D_{10}$ and $t_{3D}$ values were determined, and a model for prediction of $D_{10}$ values was developed. Cell counts of L. monocytogenes reduced as irradiation dose increased, and L. monocytogenes in PBS (no glucose) was more sensitive to irradiation and NaCl compared to those in PBS (2 or 4% glucose). $D_{10}$ values were 0.07-0.1, 0.12-0.16, and 0.13-0.15 kGy for 0, 2, and 4% glucose, respectively. The $t_{3D}$ values were 0.22-0.3 (0% glucose), 0.35-0.48 (2% glucose), and 0.40-0.44 (4% glucose). A model performance was acceptable. These results indicate that glucose in foods would increase the resistance of L. monocytogenes to gamma irradiation and NaCl stress.

• Biomolecules & Therapeutics
• /
• v.10 no.1
• /
• pp.37-42
• /
• 2002

Brain drug targeting through the blood-brain barrier (BBB) in vivo is possible with peptidornirnetic monoclonal antibodies that undergo receptor-mediated transcytosis through the BBB. Monoclonal antibody to the rat transferrin receptor, such as the OX26 was studied in rats as a transport vector through BBB on the transferrin receptor. But, OX26 is not an effective brain delivery vector in mouse. In the present studies, rat monoclonal antibody, 8D3 to the mouse transferrin receptor were evaluated for brain drug targeting vector intransgenic mouse model. Pharrnacokinetic parameters in plasma and organ uptakes were determined at varioustimes after i.v. bolus injection of [$^{}125}I$] 8D3 in Balb/c mice. Brain uptake of [$^{}125}I$] 8D3 was also studied with an internal carotid artery perfusioncapillary depletion method. After i.v. injection of [$^{}125}I$] 8D3, plasma concentrations declined biexponentially with elimination half lift of approximately 2.2 hours. Brain uptake of [$^{}125}I$] 8D3 was $0.50{\pm}0.09$ persent of injected dose per g brain after 2 hours i.v. injection. After perfusion 5 min the apparent volume of distibution of [$^{}125}I$] 8D3 in brain was $22.3 {\mu}l/g,$ which was 4.8 fold higher than the intravascular volume. These studies indicate rat monoclonal antibody to the mouse transferrin receptor, 8D3 may be used for brain drug targeting vector in mice.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.2
• /
• pp.511-517
• /
• 2016

Scabraside D, a sulfated triterpene glycoside extract from sea cucumber Holothulia scabra, shows various biological activities, but effects on human cholangiocarcinoma cells have not previously been reported. In the present study, we investigated the activity of scabraside D against human cholangiocarcinoma (HuCCA) both in vitro and for tumor growth inhibition in vivo using a xenograft model in nude mice. Scabraside D ($12.5-100{\mu}g/mL$) significantly decreased the viability and the migration of the HuCCA cells in a dose-dependent manner, with 50% inhibitory concentration (IC50) of $12.8{\pm}0.05{\mu}g/mL$ at 24 h. It induced signs of apoptotic cells, including shrinkage, pyknosis and karyorrhetic nuclei and DNA fragmentation on agarose gel electrophoresis. Moreover, by quantitative real-time PCR, scabraside D effectively decreased Bcl-2 while increasing Bax and Caspase-3 gene expression levels suggesting that the scabraside D could induce apoptosis in HuCCA cells. In vivo study demonstrated that scabraside D (1 mg/kg/day, i.p. for 21 days) significantly reduced growth of the HuCCA xenografts without adverse effects on the nude mice. Conclusively, scabraside D induced apoptosis in HuCCA cells and reduced the growth of HuCCA xenographs model. Therefore, scabraside D may have potential as a new therapeutic agent for cholangiocarcinoma.

• Journal of Environmental Health Sciences
• /
• v.44 no.6
• /
• pp.524-538
• /
• 2018

Objective: This study aimed to identify the size distributions of particulate matter emitted during 3D printing according to operational conditions and estimate particle inhalation exposure doses at each respiratory region. Methods: Four types of printing filaments were selected: acrylonitrile-butadiene-styrene (ABS), polylactic acid (PLA), Laywood, and nylon. A fused deposition modeling (FDM) 3D printer was used for printing. Airborne particles between 10 nm and $10{\mu}m$ were measured before, during, and after printing using real-time monitors under extruder temperatures from 215 to $290^{\circ}C$. Inhalation exposures, including inhaled and deposited doses at the respiratory regions, were estimated using a mathematical model. Results: Nanoparticles dominated among the particles emitted during printing, and more particles were emitted with higher temperatures for all materials. Under all temperature conditions, the Laywood emitted the highest particle concentration, followed by ABS, PLA, and nylon. The particle concentration peaked for the initial 10 to 20 minutes after starting operations and gradually decreased with elapsed time. Nanoparticles accounted for a large proportion of the total inhaled particles in terms of number, and about a half of the inhaled nanoparticles were estimated to be deposited in the alveolar region. In the case of the mass of inhaled and deposited dose, particles between 0.1 and $1.0{\mu}m$ made up a large proportion. Conclusion: The number of consumers using 3D printers is expected to expand, but hazardous emissions such as thermal byproducts from 3D printing are still unclear. Further studies should be conducted and appropriate control strategies considered in order to minimize human exposure.

• Korean Journal of Veterinary Research
• /
• v.44 no.3
• /
• pp.323-327
• /
• 2004

The purpose of the present experiment was to investigate the micronuclei(MN) frequency in cytokinesis-blocked(CB) cells after various doses of gamma-rays in pig (Landrace, male, 3-month-old) and so to contribute to the clarification of the question whether these species are suitable as a target organism in the test system. The frequencies of binucleated cells, and gamma-ray-induced MN in CB cells at several doses were measured in three donors. The peaks of binucleated lymphocyte formation(22%) were found at a concentration of 2% phytohaemagglutinin(PHA) and $4{\mu}g/ml$ Cytochalasin B(Cyt-B) in pig at 72 hours after incubation. Measurements performed after irradiation showed a dose-related increases in MN frequency in each of the donors studied. When analysed by linear-quadratic model the line of best fit was $y=0.0183D+0.0124D^2+0.0133$(y = number of MN/CB cells and D=irradiation dose in Gy). In conclusion, the results demonstrate that it appears feasible to use pig as target organisms in the micronucleus test to estimate the cytogenetic damage caused by ionizing radiations or, potentially, chemical compounds.

• Journal of the Korean Vacuum Society
• /
• v.6 no.S1
• /
• pp.96-109
• /
• 1997

In order to simulate the corrosion behavior of Zr-4 alloy in pressurized water reactors it was implanted (or bombarded) with 190ke V $Zr^+\; and \;Ar^+$ ions at liquid nitrogen temperature and room temperature respectively up to a dose of $5times10^{15} \sim 8\times10^{16} \textrm{ions/cm}^2$ The oxidation behavior and electrochemical vehavior were studied on implanted and unimplanted samples. The oxidation kinetics of the experimental samples were measured in pure oxygen at 923K and 133.3Pa. The corrosion parameters were measured by anodic polarization methods using a princeton Applied Research Model 350 corrosion measurement system. Auger Electron Spectroscopy (AES) and X-ray Photoelectric Spectroscopy (XPS) were employed to investigate the distribution and the ion valence of oxygen and zirconium ions inside the oxide films before and after implantation. it was found tat: 1) the $Zr^+$ ion implantation (or bombardment) enhanced the oxidation of Zircaloy-4 and resulted in that the oxidation weight gain of the samples at a dose of $8times10^{16}\textrm{ions/cm}^2$ was 4 times greater than that of the unimplantation ones;2) the valence of zirconium ion in the oxide films was classified as $Zr^0,Zr^+,Zr^{2+},Zr^{3+}\; and \;Zr^{4+}$ and the higher vlence of zirconium ion increased after the bombardment ; 3) the anodic passivation current density is about 2 ~ 3 times that of the unimplanted samples; 4) the implantation damage function of the effect of ion implantation on corrosion resistance of Zr-4 alloy was established.

• Progress in Medical Physics
• /
• v.28 no.3
• /
• pp.106-110
• /
• 2017

The variable density phantom fabricated with varying the infill values of 3D printer to provide more accurate dose verification of radiation treatments. A total of 20 samples of rectangular shape were fabricated by using the $Finebot^{TM}$ (AnyWorks; Korea) Z420 model ($width{\times}length{\times}height=50mm{\times}50mm{\times}10mm$) varying the infill value from 5% to 100%. The samples were scanned with 1-mm thickness using a Philips Big Bore Brilliance CT Scanner (Philips Medical, Eindhoven, Netherlands). The average Hounsfield Unit (HU) measured by the region of interest (ROI) on the transversal CT images. The average HU and the infill values of the 3D printer measured through the 2D area profile measurement method exhibited a strong linear relationship (adjusted R-square=0.99563) in which the average HU changed from -926.8 to 36.7, while the infill values varied from 5% to 100%. This study showed the feasibility fabricating variable density phantoms using the 3D printer with FDM (Fused Deposition Modeling)-type and PLA (Poly Lactic Acid) materials.

• The Korean Journal of Physiology and Pharmacology
• /
• v.26 no.5
• /
• pp.335-345
• /
• 2022

Pyroptosis is an inflammatory form of programmed cell death that is linked with invading intracellular pathogens. Cardiac pyroptosis has a significant role in coronary microembolization (CME), thus causing myocardial injury. Tanshinone IIA (Tan IIA) has powerful cardioprotective effects. Hence, this study aimed to identify the effect of Tan IIA on CME and its underlying mechanism. Forty Sprague-Dawley (SD) rats were randomly grouped into sham, CME, CME + low-dose Tan IIA, and CME + high-dose Tan IIA groups. Except for the sham group, polyethylene microspheres (42 ㎛) were injected to establish the CME model. The Tan-L and Tan-H groups received intraperitoneal Tan IIA for 7 days before CME. After CME, cardiac function, myocardial histopathology, and serum myocardial injury markers were assessed. The expression of pyroptosis-associated molecules and TLR4/MyD88/NF-κB/NLRP3 cascade was evaluated by qRT-PCR, Western blotting, ELISA, and IHC. Relative to the sham group, CME group's cardiac functions were significantly reduced, with a high level of serum myocardial injury markers, and microinfarct area. Also, the levels of caspase-1 p20, GSDMD-N, IL-18, IL-1β, TLR4, MyD88, p-NF-κB p65, NLRP3, and ASC expression were increased. Relative to the CME group, the Tan-H and Tan-L groups had considerably improved cardiac functions, with a considerably low level of serum myocardial injury markers and microinfarct area. Tan IIA can reduce the levels of pyroptosis-associated mRNA and protein, which may be caused by inhibiting TLR4/MyD88/NF-κB/NLRP3 cascade. In conclusion, Tanshinone IIA can suppress cardiomyocyte pyroptosis probably through modulating the TLR4/MyD88/NF-κB/NLRP3 cascade, lowering cardiac dysfunction, and myocardial damage.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.28 no.1
• /
• pp.135-149
• /
• 2002

To date, research on the regulation of melanogenesis has focused on factors which affect tyrosinase, the rate-limiting enzyme in the melanogenic pathway, by searching for chemicals which competitively inhibit tyrosinase function. Many types of tyrosinase inhibitors have been developed, but no satisfactory results have been made clinically until now, To find a new whitening agent, which effectively inhibits melanogenesis, we synthesized several compounds and selected compounds by cell-based assay system. Finally, 3, 4, 5-trimethoxy cinnamaie thymol ester(TCTE, Melasolv) was selected and the effects of TCTE on melanogenesis were investigated. Treatment of mouse-derived melanocyte melan-a cells with TCTE results in a marked down-regulation of tyrosinase activity. 80% decrease of tyrosinase activity occurs with 30uM TCTE treatment for 72 hours without affecting cell growth. The inhibition of tyrosinase activity is dose-dependent and melanin content was also decreased to 40%. From the in vitro tyrosinase assay using cell extract, TCTE does not act as a direct inhibitor of the enzyme. Treatment of melan-a cultures with TCTE blocks the increase in tyrosinase activity by either forskolin, 3-isobutyl-1-methtyl-xanthine. TCTE decreased the expression of tyrosinase, TRP-1 without effects on TRP-2 protein expression through the down regulation of tyrosinase and TRP-1 mRNA. From the results of cAMP immunoassays, intracellular levels of the cyclin nucleotide are unaffected in cells treated with TCTE. The inhibitory effects of melanin synthesis were also shown in reconstitute human epidermis model by topical application. These findings suggest that TCTE can be used for studying the regulation of melanogenesis and depigmenting agent.