• Journal of Communications and Networks
• /
• 제18권3호
• /
• pp.429-438
• /
• 2016

In this paper, we investigate an interference mitigation scheme by antenna selection in device-to-device (D2D) communication underlaying downlink cellular networks. We first present the closed-form expression of the system achievable rate and its asymptotic behaviors at high signal-to-noise ratio (SNR) and the large antenna number scenarios. It is shown that the high SNR approximation increases with more antennas and higher ratio between the transmit SNR at the base station (BS) and the D2D transmitter. In addition, a tight approximation is derived for the rate and we reveal two thresholds for both the distance of the D2D link and the transmit SNR at the BS above which the underlaid D2D communication will degrade the system rate. We then particularize on the small cell setting where all users are closely located. In the small cell scenario, we show that the relationship between the distance of the D2D transmitting link and that of the D2D interfering link to the cellular user determines whether the D2D communication can enhance the system achievable rate. Numerical results are provided to verify these results.

• 대한치과의사협회지
• /
• 제56권9호
• /
• pp.479-490
• /
• 2018

3D printing technology supporting the specific patient medical services is actively being implemented in dentistry. The purpose of this study is to introduce the legal and institutional considerations to the medical practitioners in dentistry who must observe when they manufacture medical devices using 3D printers, and to provide a ways to activate and enhance their utilization in the domestic approval point of view for medical devices. Through the public data of government agencies and related organizations, the statutory system and compliance matters related to the manufacture of 3D printing medical devices have been examined and reviewed for the government's improvement efforts. Through the study, the government has been actively improving the system and making policy, but the active interest and participation of medical professionals and related workers are continually required to solve the problems which are scattered. 3D printing technology is expected to be more frequently utilized in the field of dentistry in near future. Therefore, it is essential to establish measures to improve the regulation through continuous cooperation with the related ministries with the long-term point of view enhancing smooth entry to the market for the medical devices by taking data from the continued research.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2007년도 학술대회 1부
• /
• pp.1006-1011
• /
• 2007

Active Appearance Models은 객체의 모델링에 널리 사용되며, 특히 얼굴 모델은 얼굴 추적, 포즈 인식, 표정 인식, 그리고 얼굴 인식에 널리 사용되고 있다. 최초의 AAM은 Shape과 Appearance가 하나의 계수에 의해서 만들어 지는 Combined AAM이였고, 이후 Shape과 Appearance의 계수가 분리된 Independent AAM과 3D를 표현할 수 있는 Combined 2D+3D AAM이 개발 되었다. 비록 Combined 2D+3D AAM이 3D를 표현 할 수 있을지라도 이들은 공통적으로 2D 영상을 사용하여 모델을 생산한다. 본 논문에서 우리는 stereo-camera based 3D face capturing device를 통해 획득한 3D 데이터를 기반으로 하는 3D AAM을 제안한다. 우리의 3D AAM은 3D정보를 이용해 모델을 생산하므로 기존의 AAM보다 정확한 3D표현이 가능하고 Alignment Algorithm으로 Inverse Compositional Image Alignment(ICIA)를 사용하여 빠르게 Model Instance를 생산할 수 있다. 우리는 3D AAM을 평가하기 위해 stereo-camera based 3D face capturing device로 촬영해 수집한 한국인 얼굴 데이터베이스[9]로 얼굴인식을 수행하였다.

• Journal of Information Processing Systems
• /
• 제17권3호
• /
• pp.505-517
• /
• 2021

This research presented an implementation of autostereoscopic virtual three-dimensional (3D) button device as non-contact style. The proposed device has several characteristics about visible feature, non-contact use and artificial intelligence (AI) engine. The device was designed to be contactless to prevent virus contamination and consists of 3D buttons in a virtual stereoscopic view. To specify the button pressed virtually by fingertip pointing, a simple deep learning network having two stages without convolution filters was designed. As confirmed in the experiment, if the input data composition is clearly designed, the deep learning network does not need to be configured so complexly. As the results of testing and evaluation by the certification institute, the proposed button device shows high reliability and stability.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.763-764
• /
• 2013

A three-dimensional image capturing device and its signal processing algorithm and apparatus are presented. Three dimensional information is one of emerging differentiators that provides consumers with more realistic and immersive experiences in user interface, game, 3D-virtual reality, and 3D display. It has the depth information of a scene together with conventional color image so that full-information of real life that human eyes experience can be captured, recorded and reproduced. 20 Mega-Hertz-switching high speed image shutter device for 3D image capturing and its application to system prototype are presented[1,2]. For 3D image capturing, the system utilizes Time-of-Flight (TOF) principle by means of 20MHz high-speed micro-optical image modulator, so called 'optical resonator'. The high speed image modulation is obtained using the electro-optic operation of the multi-layer stacked structure having diffractive mirrors and optical resonance cavity which maximizes the magnitude of optical modulation[3,4]. The optical resonator is specially designed and fabricated realizing low resistance-capacitance cell structures having small RC-time constant. The optical shutter is positioned in front of a standard high resolution CMOS image sensor and modulates the IR image reflected from the object to capture a depth image (Figure 1). Suggested novel optical resonator enables capturing of a full HD depth image with depth accuracy of mm-scale, which is the largest depth image resolution among the-state-of-the-arts, which have been limited up to VGA. The 3D camera prototype realizes color/depth concurrent sensing optical architecture to capture 14Mp color and full HD depth images, simultaneously (Figure 2,3). The resulting high definition color/depth image and its capturing device have crucial impact on 3D business eco-system in IT industry especially as 3D image sensing means in the fields of 3D camera, gesture recognition, user interface, and 3D display. This paper presents MEMS-based optical resonator design, fabrication, 3D camera system prototype and signal processing algorithms.

• 한국통신학회논문지
• /
• 제38A권4호
• /
• pp.371-380
• /
• 2013

셀룰러 인프라 구조에 기반하여 셀룰러 스펙트럼을 공유하여 사용하는 D2D (Device-to-Device) 통신은 몇 가지 장점이 있지만, 셀룰러 네트워크 사용자와 동일한 자원을 사용하므로 간섭이 생기는 큰 문제점이 있다. 특히, 다중 셀에서 셀 경계 D2D 사용자와 셀룰러 사용자 간의 간섭 문제는 셀의 중심부에서보다 훨씬 강도가 높게 발생한다. 따라서, 본 논문에서는 인접한 셀들의 중심에 위치한 SRN (Shared Relay Node)이 셀룰러 링크와 D2D 링크 사이에 발생하는 간섭을 효율적으로 관리하는 새로운 방식을 제안한다. 제안하는 SRN은 기존 Type II 릴레이와 같이 데이터 재전송 역할을 수행할 뿐만 아니라, 추가적으로 간섭 관리를 위한 기능을 수행하기 때문에 몇 가지 기능이 새롭게 정의된다. 셀룰러 링크와 D2D 링크 사이에 간섭 관리를 위한 구체적인 방법으로 본 논문에서는 셀 경계영역 사용자들의 간섭 회피를 위한 SRN 기반 자원할당 방법을 제안하고 이들의 성능을 모의실험을 통해 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.78-80
• /
• 2006

Mouse is widely used in multimedia education. However, using mouse is not easy for user to get exact three dimentional (3D) user input and to manipulate delicately as the user can not know the surface information of virtual objects, which are typical drawbacks of using mouse in multimedia education, especially in 3D multimedia contents authoring. In this paper, haptic device is introduced to the 3D multimedia education. The haptic device provides 3D user's input information as well as haptic information of virtual objects such as surface textures, collisions and etc. which thus allow to enhance the task efficiency in multimedia education. Simple experiment results are presented to show the positive results of using the haptic device in multimedia education.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.635-641
• /
• 2009

본 논문에서는 다양한 휴대형 단말기기의 플랫폼 친화적이며 컨텐츠 개발의 신속성, 확장성 및 용이성이 고려된 3D 컨텐츠 플랫폼 엔진과 Application Frame 기술을 Convergence하였으며, Mobile Device에 탑재 가능한 3D 그래픽 사용자 인터페이스(GUI)의 시제품을 제작 및 응용하고, Mobile Game 등 컨텐츠의 개발을 효과적으로 빠르고 쉽게 구현할 수 있는데 필요한 3D GUI 객체(widget) 및 툴킷을 포함하는 Frame을 표준화 하는데 기본이 되는 연구를 하였다.

• 인터넷정보학회논문지
• /
• 제20권3호
• /
• pp.69-75
• /
• 2019

The safety and performance of medical device software is managed through life-cycle processes, which represent the entire process of research and development (R&D). The life-cycle process of medical device software is represented by an international standard called IEC 62304, ISO/IEC 12207. In order to license the product, the manufacturer must have document artifacts that comply with the IEC 62304 standard. However, these standards only describe the content of the activity and do not provide a method or procedure for documentation. Therefore, this paper suggests R&D documentation guidelines that assist medical device software developers to have R&D documents conforming to the standards. For this purpose, this study identifies the requirements related to documentation among the requirements existing in the standard and extracts them in the form of guidelines showing only the core information of the requirements. In addition, through the Web framework implemented based on this research, the developer can evaluate whether the technical documents are written in accordance with the R&D document guidelines. Medical device software manufacturers can efficiently produce high-quality research and development documents through R&D documentation guidelines, and they can have standards-compliantresearch and development documentation required for licensing procedures.

• Journal of information and communication convergence engineering
• /
• 제20권3호
• /
• pp.143-152
• /
• 2022

The ongoing adoption of 5G will increase the data traffic, throughput, multimedia services, and power consumption for future wireless applications and services, including sensor and mobile networks. Multipath fading on wireless channels also reduces the system performance and increases energy consumption. To address these issues, device-to-device (D2D) and cooperative communications have been proposed. In this study, we propose two inter-clustering models using the relay selection method to improve system performance and increase energy efficiency in cooperative D2D networks. We develop two inter-clustering models and present their respective algorithms. Subsequently, we run a computer simulation to evaluate each model's outage probability (OP) performance, throughput, and energy efficiency. The simulation results show that inter-clustering model II has the lowest OP, highest throughput, and highest energy efficiency compared with inter-clustering model I and the conventional inter-clustering-based multirelay method. These results demonstrate that inter-clustering model II is well-suited for use in 5G overlay D2D and cellular communications.