• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.3
• /
• pp.245-260
• /
• 2016

This study explored cases of 3D printing utilization in domestic and overseas fashion industries, and presented utilization strategies for fashion design departments in universities in future by grasping characteristics of newly appearing distribution types through 3D printing. Cases of producing costumes using 3D printing in fashion industry comprised a bikini using the material of Nylon12 that continuum fashion demonstrated, innovative 3D costumes by Iris Van Herpen, Tweed Suit using the material that Chanel manufactured with 3D printing technology, but they were limited to experimental fashion works due to limitations of 3D printer material and printing size. On the other hand, in fashion accessories, with jewelry and shoes at the head of the list, MCM and Kipling also demonstrated bags using this technology, and Elvis Pompilio and Gabriela Ligenza demonstrated 3D printing hat products as well. Except the above, as in glasses and neckties utilizing 3D printing, owing to reduced limitations of time, size and material, 3D printing was found to be utilized in fashion accessories other than costumes. Recently there has been a new consumption and distribution structure coming up focusing on 3D printing technology. That is, in overseas countries, content platforms sharing products modeled by oneself has rapidly appeared, and in our country as well, funnypoly, a 3D content platform appeared in 2015. The appearance of these new types of distribution structures means that the common people can produce design contents, and we believe that it may bring about a change in the traditional way of distribution structure. To walk in step with this change, it is believed that it is necessary for fashion design departments to raise college faculty members who can educate 3D printing, develop curriculum to educate 3D printing, and develop experiential programs connected with middle and high schools.

• Journal of Chest Surgery
• /
• v.14 no.3
• /
• pp.235-240
• /
• 1981

A total of 102 patients who had an Open Heart Surgery from April 1976 to July 1981 were reviewed. 55 paeitnts were congenital heart disease and 47 patients were acquired heart disease. Among SS patients of congenital heart disease, 18 T 0 F, 18 V S D, 8 A S D, and each one case of l\ulcorner 0 R V, Truncus arteriosus, Ebstein anomaly, Single ventricle, P D A, P 5, A S D + P 5, E C D, V 5 D + P D A, A - P window, D C R V were noted respectively. In 47 patients of acquired heart disease and one Ebstein patient, 46 prosthetic values were implanted: 17 had M V R, 4 had A V R, 2 had M V R + A V R, and 4 had M V R + T V R and one T V R. The operative mortality was 8.S% in acquired heart disease and 17% in congenital heart disease. The follow up period was between 6 months and 6 years. There were 3 cases of late mortality in acquired heart disease and one case in congenital heart disease.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.10
• /
• pp.4643-4646
• /
• 2016

The CC chemokine receptor 5 (CCR5) delta 32 allele results in a nonfunctional form of the chemokine receptor and has been implicated in a variety of immune-mediated diseases. $CCR5{\Delta}32$ may also predispose one to chronic liver disease or be linked with resistance to HBV infection. This study was undertaken to investigate any association between CCR5 polymorphism with resistance to hepatitis B or susceptibility to HBV infection. A total of 812 Iranian individuals were enrolled into two groups: HBV infected cases (n=357), who were HBsAg-positive, and healthy controls (n=455). We assessed polymorphisms in the CCR5 gene using specific CCR5 oligonucleotide primers surrounding the breakpoint deletion. Genotype distributions of the HBV infected cases and healthy controls were determined and compared. The CCR5/CCR5 (WW) and $CCR5/CCR5{\Delta}32$ (W/D) genotypes were found in (98%) and (2%) of HBV infected cases, respectively. The $CCR5{\Delta}32/{\Delta}32$genotype was not found in HBV infected cases. Genotype distributions of CCR5 in healthy controls were W/W genotype in (87.3%), W/D genotype in (11.2%) and D/D genotype in (1.5%). Heterozygosity for $CCR5/CCR5{\Delta}32$ (W/D) in healthy controls was greater than in HBV infected cases (11.2% vs 2%, p < 0.001). W/D and D/D genotypes were more prominent in healthy controls than in HBV infected cases. This study provides evidence that the $CCR5{\Delta}32$ polymorphism may have a protective effect in resistance to HBV infection at least in the Iranian population.

• The KIPS Transactions:PartD
• /
• v.15D no.4
• /
• pp.531-540
• /
• 2008

An Adaptive Random Testing(ART) is one of test case generation algorithms, which was designed to get better performance in terms of fault-detection capability than that of Random Testing(RT) algorithm by locating test cases in evenly spreaded area. Two ART algorithms, such as Distance-based ART(D-ART) and Restricted Random Testing(RRT), had been indicated that they have significant drawbacks in computations, i.e., consuming quadratic order of runtime. To reduce the amount of computations of D-ART and RRT, iterative partitioning of input domain strategy was proposed. They achieved, to some extent, the moderate computation cost with relatively high performance of fault detection. Those algorithms, however, have yet the patterns of non-uniform distribution in test cases, which obstructs the scalability. In this paper we analyze the distribution of test cases in an iterative partitioning strategy, and propose a new method of input domain enlargement which makes the test cases get much evenly distributed. The simulation results show that the proposed one has about 3 percent of improvement in terms of mean relative F-measure for 2-dimension input domain, and shows 10 percent improvement for 3-dimension space.

• The KIPS Transactions:PartD
• /
• v.17D no.1
• /
• pp.41-52
• /
• 2010

A relation between generated test cases and an original requirement is important, but it becomes very complex because a relation between requirement models and requirements are m-to-n in automatic test case generation based on models. In this paper, I suggest automatic generation technique for REED (REquirement EDitor), 1-to-1 requirement modeling tool. Test cases are generated though 3 steps, Coverage Target Generation, IORT (Input Output Relation Tree)Generation, and Test Cases Generation. All these steps are running automatically. The generated test cases can be generated from a single requirement. As a result of applying to three real commercial systems, there are 5566 test cases for the Temperature Controller, 3757 test cases for Bus Card Terminal, and 4611 test cases for Excavator Controller.

• Journal of Chest Surgery
• /
• v.11 no.1
• /
• pp.85-91
• /
• 1978

H.S. Lee, M.D., H.S. Yu, M.D. Esophageal perforation occurred rarely but often lead to a high mortality and morbidity. In the past, the main cause of esophageal perforation in Korea were instrumental perforation in patient with lye stricture of the esophagus. We experienced 9 cases of other forms of esophageal perforation from 1972 through 1977 and obtained the following results. 1. These 9 patients ranged from 10 months to 40 years in age at the time of admission. Six were women. 2. Causes of perforation are instrumental perforation in 3, foreign body perforation in 3, spontaneous perforation in 3 and one pneumatic esophageal perforation. 3. Perforation developed in a variety of locations in the esophagus. Three occurred in cervical part, two in the upper thoracic part, two in the lower thoracic part. 4. The main clinical symptoms and signs were dyspnea, subcutaneous emphysema, chest pain and fever. 5. Thoracic rentgenogram disclosed subcutaneous and mediastinal emphysema, widening of mediastinum and pleural effusion at the time of admission. 6. Complications of esophageal perforation were mediastinitis [7 cases], empyema [4 case], respiratory distress [4 cases] and sepsis [3 cases]. 7. In 3 deaths of the nine patients who sustained perforation of the esophagus, one was due to transfusion of infected blood and two of them were due to sepsis following empyema and mediastinitis. Early treatment [less than 24 hr] gave no hospital death, and good results obtained in the perforations of cervical and upper thoracic esophagus.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1850-1856
• /
• 1989

For determining motion/structure of a 3-D rigid object from point correspondences over two perspective views, a linear algorithm was developed in Refs. 3 and 4. This algorithm fails when the 3-D points under observation satisfy certain geometrical constraints, as demonstrated in Refs. 7 and 8. In the present paper, we show that the linear algorithm can be resurrected in these degenerate cases by adding additional lower order polynomial constraints to original equations.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.2
• /
• pp.192-205
• /
• 2011

This study analyzed the registration of patent and utility models by fashion firms in Korea. A total of 2,291 registration cases of IPC A41B-H from the period of 1996 to 2009 were collected by KIPRIS of the Korean Intellectual Property Organization (KIPO). All cases were analyzed by year to review the longitudinal trend and 481 cases of IPC A41B (shirts, underwear, baby linen, and handkerchiefs) and 1088 cases of IPC A41D (outerwear, protective garments, and accessories) were analyzed by content (provided benefit type and developing method), by detailed product items and the characteristics of the applicant. The results of this study were as follows: 1) Registration of IPC 41 increased steeply by the year (especially since 2006) and the patent registrations increased more than those in the utility model. 2) Analyzing the application content of A41B on the basis of benefit showed that 75% were to provide new functions and the rest were for health. In terms of the developing method, 83% of benefit provided by the application were by design development, 11.2% were by material, and the rest was by process, In the cases of IPC A41D, 23.6% were for safety and protection. In terms of the developing method, the process and material development were more frequently adopted than in the cases of A41B. 3) The major product types of A41B were socks, underwear, and infant wear, whereas gloves and parts of clothing were major items in A41D. 4) In terms of the characteristics of the applicant, registration by firms was greater for patents than for utility models and registration by foreigners increased in 2006 due to the complete opening of the retail market. 5) Fifteen universities registered for a total 57 cases and major applications were for IT related clothing or high-tech protective items.

• Journal of Biomedical Engineering Research
• /
• v.41 no.2
• /
• pp.75-83
• /
• 2020

In large-scale hospitals, the department of biomedical engineering should always provide quick repair service for damaged medical devices to guarantee continuous patient treatment. However, in actual circumstances, there are so many time-consuming issues that delays device repair for weeks or even months; therefore, it is required to prepare alternative ways for quick repair service. In this study, we first mentioned about the regulation issues in Korea about the 3D printing-based medical device repair, and then introduced the results of our preliminary study that evaluated the feasibility of 3D printing-based medical device repair before real-field application. Results of the study demonstrated that, in all of the 23 cases, parts for repair that were manufactured by 3D-printing were successfully fixed and connected to the main body of the original device, and showed sufficient rigidity for protecting internal parts of the device. Considering the experimental results, medical device repair by applying 3D printing technology can be a promising alternative in cases when regular repair process is not available or takes too much time.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.97-101
• /
• 2022

In this study we investigated the gas to solid heat transfer of bubbling fluidized bed bottom ash cooler installed at the Donghae power plant in South Korea. Several different analyses are done through 1-D calculations and 3-D CFD simulation to predict the bottom ash exit temperatures when it exits the ash cooler. Three different cases are set up to have consideration of unburnt carbon in the bottom ash. Sensible heat comparison and heat transfer calculation between the fluidization air and the bottom ash are conducted and 3-D CFD analysis is done on three cases. We have obtained the results that the bottom ash with unburnt carbon is exiting the ash cooler, exceeding the targeted temperature from both 1-D calculation and 3-D CFD simulation.