• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.783-786
• /
• 2004

We have developed a 470 x 235ppi poly-Si TFT LCD with a novel pixel arrangement, called HDDP (Horizontally Double-Density Pixels), for high-resolution 2D and 3D autostereoscopic display. 3D image quality is especially high in a lenticular-lens-equipped 3D mode because both horizontal resolution and vertical resolution are high, and because these resolutions are equal. 3D and 2D images can be displayed simultaneously in the same picture. In addition, 3D images can be displayed anywhere and 2D characters can be made to appear at different depths with perfect legibility. No switching of 2D/3D modes is necessary, and the design's thin and uncomplicated structure makes it especially suitable for mobile terminals.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.77-80
• /
• 2004

In this study the spatial distribution characters of burnt forest site was first considered by analyzing spatial data and monitoring forest landscape before/after lire to restore the site. Then suitable tree species on each forest site should be selected through the weighted score analysis of GIS analysis methods. Finally. the best forest stand arrangement method could be simulated on the system for the advanced reforestation technology in Korea. For this purpose, the virtual reforestation system was implemented by using the concept of virtual GIS and CBD (Component Based Development) method. By use of this system the change of forest landscape of burnt forest area some years after reforestation practice could be detected and monitored by applying the site index and 3D modeling method.

• 한국CDE학회논문집
• /
• 제17권4호
• /
• pp.262-273
• /
• 2012

We present a novel GPU algorithm to compute outer cell boundaries of 3D arrangement subdivided by a given set of triangles. An outer cell boundary is defined as a 2-manifold surface consisting of subdivided polygons facing outward. Many geometric problems, such as Minkowski sum, sweep volume, lower/upper envelop, Bool operations, can be reduced to finding outer cell boundaries with specific properties. Computing outer cell boundaries, however, is a very time-consuming job and also is susceptible to numerical errors. To address these problems, we develop an algorithm based on GPU with a robust scheme combining interval arithmetic and multi-level precisions. The proposed algorithm is tested on Minkowski sum of several polygonal models, and shows 5-20 times speedup over an existing algorithm running on CPU.

• 한국조경학회지
• /
• 제27권3호
• /
• pp.18-31
• /
• 1999

The research deals with external space Seowon(lecture hall) dedicated to education and memorial rises in Sangju area of Choson Dynasty. Characteristics of Seowon as follow; 1. Seowon of Sangju area were built from the middle of 17C to the beginning of 18C. Ideological background of building functioning were grafted into the belief in the three God governing Childbirth, the theory of feng-shui(wind-and water-magic) which is in close connection with the principles of yin and yang, and confucianism and the philosophy of lao-tze and chung-tze. The formation of space were horizontally arrangement and vertical arrangement as the first-learning and then-ancestor shrine of Youngnam provinces. 2. Background and factors of site selection were applied geographical feature, tried to connect owner home town. 3. The shape of path of flow were simple of vertical and curved composition, were continued, were stabilized through composition of human scale's space by reasonable internal. A case of Sangju area, D/H ratio of the front area of buildings and courts was as follows. D/H=1>Hyangkyo> houses on the river>temples>lecture halls. D/H ratio ot the backside areas is as follows. D/H=1>Hyangkyo>houses on the river>lecture halls. 4. Inner garden were planted deciduous than evergreen trees with Lagerstroemia indica. Enclosed dominant trees were planted by Pinus densiflora, Querces seuata.construct GEM strain, and examined for the expression and functional stability in microcosms.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.281-285
• /
• 2001

This study was carried out to improve the performance of heat recovery device attached to exhaust gas flue connected to combustion chamber of greenhouse heating system. Three different units were prepared for the comparison of heat recovery performance; AB-type(control unit) is exactly the same with the typical one fabricated for previous study of analyzing heat recovery performance in greenhouse heating system, other two types(C-type and D-type) modified from the control unit are different in the aspects of airflow direction(U-turn airflow) and pipe arrangement. The results are summarized as follows; 1. In the case of Type-AB, when considering the initial cost and current electricity fee required for system operation, it is expected that one or two years at most would be enough to return the whole cost invested. 2. Type-C and Type-D, basically different with Type-AB in the aspect of airflow pattern, are not sensitive to the change of blower capacity with higher than $25\;m^{3}/min$. Therefore, heat recovery performance was not improved so significantly with the increment of blower capacity. This is assumed to be that air flow resistance in high air capacity reduces the heat exchange rate as well. Never the less, compared with control unit, resultant heat recovery rate in Type-C and Type-D were improved by about 5% and 13%, respectively. 3. Desirable blower capacity for these heat recovery units experimented are expected to be about $25\;m^{3}/min$, and at the proper blower capacity, U-turn airflow units showed better heat recovery performance than control unit. But, without regard to the type of heat recovery unit, it is recommended that comprehensive consideration of system's physical factors such as pipe arrangement density, unit pipe length and pipe thickness, etc., are required for the optimization of heat recovery system in the aspects of not only energy conservation but economic system design.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 1부
• /
• pp.161-168
• /
• 2006

본 연구는 공간적 정보의 청각적 제시 가능성을 확인하기 위해 머리전달함수(head-related transfer function: HRTF)를 통해 생성된 3D 사운드를 가상공간상 대상 위치의 직각형태(orthogonal pattern), 혹은 대각형태(diagonal pattern)의 조합으로 배열하여 투시장치(See-Through HMD)로 증강현실을 경험하고 있는 사용자 과제수행의 정확성을 측정하였다. 본 연구에서 실시한 실험들의 결과를 종합하면, 3D 사운드로 대상의 위치 정보를 제시할 때는 사용자로부터의 방향은 직각으로 위치시키는 정보 배열이 정확성을 확보할 수 있고, 또한 가상적 깊이를 이용하여 정보를 배열하는 것도 그 깊이를 구분할 수 있으나 정확성이 떨어짐을 확인하였다. 특히 보다 현실적인 과제 상황에서의 수행을 비교하기 위해 일차과제(primary task)를 하는 동안 제시된 청각자극 조건에서 이런 정확성의 차이가 마찬가지로 나타났다. 이런 결과를 통해 3D 사운드로 대상의 위치와 같은 공간적 정보를 제시 가능한 최적의 배열 형태를 제안하는데, 이는 어떤 패턴으로 정보를 구조화하여 제시하느냐에 따라 청각적 위치 정보 제시의 성공 여부가 결정된다는 것을 의미한다.

• 한국터널지하공간학회 논문집
• /
• 제18권6호
• /
• pp.569-579
• /
• 2016

국내 터널 갱구사면에 안정성을 확보하기 위한 사면보강은 앵커, 쏘일네일 및 록볼트 등을 이용한 다양한 공법이 사용되고 있다. 갱구 사면보강공법 및 보강재 배치, 보강재 길이 등을 선정하기 위해서는 시행착오법 등 시간이 많이 소요되기도 하며, 최적조건의 상태가 선정되었는지에 대한 검증이 쉽지 않은 경우도 발생한다. 본 연구에서는 FLAC3D 프로그램에 내장된 FISH 언어를 사용해서, 차분진화 알고리즘(DEA)을 적용한 최적화기법을 개발하였다. 갱구사면 보강공법 중에 쏘일네일링 공법에 대한 데이터베이스를 구축한 후, FLAC3D 해석을 통한 안전율 기반의 최적보강배치 계획을 선정할 수 있도록 하였다. 수치해석 결과, 완전조합(FC)에 비해서 DEA 기반의 최적화기법이 해석회수가 8배 정도 감소함을 확인하였다. 갱구 사면보강 설계 시 개발된 시스템을 활용하면, 최적보강배치 계획을 상대적으로 쉽게 선정할 수 있을 것으로 기대된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권2호
• /
• pp.264-270
• /
• 2011

본 연구는 직렬배열 상태에 놓인 3원주 주위의 유동장 특성을 PIV를 이용하여 파악한 것이다. 실험은 레이놀즈수 Re=$3.0{\times}10^3{\sim}5.0{\times}10^3$ 범위 내에서 수평간격비(P/D)를 P/D=1.25~3.75로 변화시켜가며 행하였다. 각각의 실험 파라메터에서 Strouhal 수, 와도변화, 순간 및 평균 속도벡터 및 속도분포를 측정하였으며 그 결과를 요약하면 다음과 같다. 3번째 원주 후방에서 측정한 Strouhal 수는 수평간격비 P/D에 따라 크게 3가지 영역으로 구분되며, 각 원주의 후류에서의 흐름 패턴은 이들 영역에 따라 달랐다. 각 원주 후방에서 시간평균 흐름은 거의 정체상태에 있었으며, 그 정체영역의 크기는 1번째, 2번째, 3번째 원주 순으로 작았다. 2번째 원주 전, 후방 영역에서는 받음각 미소 (${\alpha}= {\pm}5^{\circ}$)에 따라 서로 반대방향의 볼텍스가 형성했다.

• 한국산학기술학회논문지
• /
• 제10권6호
• /
• pp.1164-1169
• /
• 2009

본 논문에서는 자동화 모듈인 씨마트론 다이 디자인을 활용하여 자동차에 사용되는 브라켓을 3D로 설계를 하였다. 제품의 스탬핑을 원활하게 하기 위하여 스트립 레이아웃을 일부 수정하여 광폭 2열 2개 뽑기의 내측캐리어를 단 배열로 블랭크 레이아웃을 최적화하였다. 11개 공정으로 3D 설계를 완성하였다.

• BMB Reports
• /
• 제56권12호
• /
• pp.633-644
• /
• 2023

Epigenetic mechanisms, primarily mediated through histone and DNA modifications, play a pivotal role in orchestrating the functional identity of a cell and its response to environmental cues. Similarly, the spatial arrangement of chromatin within the three-dimensional (3D) nucleus has been recognized as a significant factor influencing genomic function. Investigating the relationship between epigenetic regulation and 3D chromatin structure has revealed correlation and causality between these processes, from the global alignment of average chromatin structure with chromatin marks to the nuanced correlations at smaller scales. This review aims to dissect the biological significance and the interplay between the epigenome and 3D chromatin structure, while also exploring the underlying molecular mechanisms. By synthesizing insights from both experimental and modeling perspectives, we seek to provide a comprehensive understanding of cellular functions.