• 패션비즈니스
• /
• 제21권6호
• /
• pp.87-105
• /
• 2017

In the fashion industry, 2D apparel CAD technology has already matured and various 3D apparel CADs have been introduced and are available for users. In the fourth industrial revolution era, the 3D apparel technology will be highlighted, and the research of 3D apparel CAD will be much more emphasized upon. Currently, various 3D apparel CAD have been developed and commercialized due to the rapid development of technology. However, in reality, the analysis and discussions about its problems and the improvements for clothing from a user's perspective have not been carried out yet. The purpose of this study was to provide the reference information about 3D apparel CAD for users by studying and comparing the characteristics of 3D apparel CAD. The 3D apparel CAD, DC Suite and CLO3D were selected for technical comparative study. The 3D apparel CAD mainly includes 3D body system, garment pattern system and garment simulation system and so on. It was compared and analyzed; the problem was presented, and the directions of improvement were put forth.

• 한국의류산업학회지
• /
• 제11권1호
• /
• pp.112-120
• /
• 2009

The purpose of this study is to develop Andongpo apparel pattern design connected with the Apparel CAD system. It includes pattern making, grading, marking program. In this study, it will be able to make apparel pattern quickly and accurately by using Apparel CAD system. The results were as following : Computerization of the pattern making process is expected to provide higher accuracy and efficiency in apparel pattern making for narrow and expensive Andongpo. ESMOD pattern making method was selected as basic pattern. Tailored jacket patterns were developed for Andongpo. Refer to and . The jacket patterns developed is automatically depicted by inputting consumer's body size. Tailored jacket patterns for Andongpo were marked by using marking program in Apparel CAD system. The efficiency of marking appeared of 70% or more in Andongpo jacket patterns. This results is showed it has an effect on narrow and expensive Andongpo. 3tailored jacket patterns will be able to make a simulation by 3D Apparel CAD system. The results of this study is expected to provide higher consumer's satisfaction and internet brand launching. In addition, encouraging majority of the young to participate in using CAD program for Andongpo is regarded as beneficial for the reinforcement of competitiveness of traditional clothing business.

• 대한가정학회지
• /
• 제35권5호
• /
• pp.249-264
• /
• 1997

The purpose of this study was to provide the reference information for user and potential users of apparel CAD system is Korea. Two interviews were carried out for the study. The apparel CAD system of Assyst, Gerber and Yuka was selected for technical comparative study. The results were as follows: 1. The future development of the apparel CAD system is the transfer of the developed pattern design from a 3D design system and of CIM concept. 2. The share of data is working closely in a module function. So the Assyst system provide connectivity and communication between all apparel CAD system's module and other automation programs. This system is suitable for CIM production line. 3. The Gerber system is developed the Apparel CAD system which is given by the CAM system's technical ability. This system is given high insurance of ability to the service and data transportation with other systems from users in the Korea. 4. The Yuka system is developed pattern making by the Apparel CAD system. This system's different methods which is compared with other systems are the split grading and auto pattern making. So this system is suitable for users which want to product many items and a little amount garment by using the Apparel CAD system.

• 한국의류학회지
• /
• 제35권9호
• /
• pp.1112-1124
• /
• 2011

The development of computer graphics and Internet technology has created a 3D Web-based virtual world that has transformed the global fashion industry environment. In this study, the application cases of 3D virtual fashion education were analyzed to discuss the necessity and application of a 3D apparel CAD curriculum as part of a special education for global fashion talent at Korean fashion-related colleges. Prior studies, literature, photo data and Internet data (in and out of Korea) were used for this study. The demonstration case studies were conducted for the virtual fashion education 'SLCC 2007' of Buffalo State College (U.S.), 'Ratava's Line (2004)' of SFU/FIT Collaborative Design Project (Canada and U.S.) and '2011 Graduation Fashion Show' of Ueda Fashion College (Japan). The results of the study show that the 3D apparel CAD system (as a core technology of the IT fashion industry) would allow the current mass production concept to change to a new paradigm of 'mass customization' along with new fashion business types that include global fashion companies and Web-based Internet, mobile and virtual-world shopping malls. In addition, it appears that the system should be included in the curriculum of fashion-related colleges and institutes to educate technical designers for the global fashion industry and global fashion talent with comprehensive system operation and management ability, and to promote single proprietor companies.

• 패션비즈니스
• /
• 제16권4호
• /
• pp.137-151
• /
• 2012

This study aims to use the avatar sizing system of the 3D apparel CAD program instead of the existing 3D body scanners, and to commercialize 3D personal avatars. Towards these ends, the study examined a difference between a 3D avatar and actual body was determined to verify the 3D avatar sizing system. For the experiment, three subjects were selected, were measured as they were, and were made to undergo 3D body scanning and photographing. Then, using avatar sizing system on the 3D apparel CAD program, three types of virtual bodies, namely 3D avatars. The 3D avatar and actual body measurements were compared, and 3D avatars and 3D body-scanned shapes were likewise compared. As a result, the three types of actual bodies and their 3D avatars that were created based on the sizing system of the 3D apparel CAD program were overall similar. but, the thin body-YY type and the normal body-A type were different from their avatars. In the case of type B, who had a bulging abdomen, the 3D avatar was bigger than the actual body as measured. Also, in all body shapes, the girths around the chest, waist and abdomen were produced with exaggerated muscular amounts compared to their actual muscular amounts.

• 한국의류산업학회지
• /
• 제14권6호
• /
• pp.992-1000
• /
• 2012

This study develops a traditional green fabric pattern design through an apparel CAD system. The method used simulated stage costumes and evaluated the consumer satisfaction connected with a 3D fitting system. The results are as follows. Computerization of the pattern making process can provide higher accuracy and efficiency in apparel pattern making and marking for green fabrics. A Stage costumes design was developed; subsequently, the developed dress patterns are automatically depicted to the input of the body size of the consumer and marked using marking program. This results show that it has an effect on narrow and expensive green fabrics. Stage costumes design can make a simulation by a 3D Fitting system. The results of this study can provide higher consumer satisfaction through a survey of 30 consumers. Stage costumes should attract the sympathy of the spectators. The Acceptance of Andong region's traditional beauty is required. We found that a relationship of performance and clothes, physical functionality and beauty of costumes, possibility of commercialization, and the possible use of a 3D Fitting system use are evaluated. A continuous study of regional culture resources is required since there is a significant possibility for the long-term development of stage clothes.

• 패션비즈니스
• /
• 제15권5호
• /
• pp.103-114
• /
• 2011

During a wearer's movement, the apparel fabric layers collide each other in a highly complicated manner. The collision involves cloth-cloth, and cloth-body collision. The diversity of the textile fabrics, including silk, wool, cotton, and other synthetic fibers, together with the complex details of the apparel construction, makes the collision and other calculation procedure involved in the 3-dimensional clothing software system much more complicated. Therefore, there is a need to measure the behavior of the fabrics during the fabric collision cycles. In this study, as a first step, static measurements pertinent to the factors governing the appearance of the apparel fabrics were implemented. The drape profile, stiffness(Sd and Sf), tensile properties, thickness, and the air permeability were measured. The correlation between the parameters were calculated and reviewed. It is found that there is a high correlation of 0.97 between the actual fabric drape parameters and the 3D virtual fabric drape parameters. The measured drape coefficients of the fabrics show relatively good correlation with the measured fabric stiffness.

• 복식
• /
• 제59권8호
• /
• pp.26-36
• /
• 2009

The aim of this study is to be the fundamental study for virtual clothing system of the future through a comparative analysis of the difference between a virtual frill skirt and a real frill skirt using a 3-dimensional Apparel cad system. Satin was selected as a comparative fabric of the real skirt and virtual skirt. And compared skirts are frilled 1.5widths, 2widths, and 2.5widths. In case of 1.5widths frilled, the real skirts and virtual skirts showed no significant difference except in shirring frill expression. However, in case of 2widths frilled, and 2.5widths frilled skirts, significant differences in the extent of frill flattening, the sectional diagram of the bottom hem, and the skirt shape. The virtual skirt showed that as its multiple proportion of frill increased, the sidelines of the skirt drooped and excessively extended, and collision detection that the belt was twisted and torn apart arose. Furthermore, not only the frill but also the shape of the skirt was transformed, and the bottom hems were widened back and forth, and the sectional diagram of the bottom hems were transformed into rounded shapes.

• 한국의류학회지
• /
• 제18권1호
• /
• pp.43-56
• /
• 1994

The Purpose of this study was to utilize of CAD System in pattern making process for women's apparel. The automation by the use of CAD System provides the higher accuracy and efficiency in pattern making process. AccuMark 300 System was used. for .this study. The results from this study were as follows . 1. New size spec chart and grading pitch chart were developed based on the data analysis and fitting tests for female college students. 2. New jacket block was developed based on the torso length sloper 3. Automatic grading of jacket block have been developed by creation and modification of grading rules of block pattern. 4. Pattern Design Systyem(P/D/S) were enabled to be constructed directly form a block pattern by modifications to existing styled pattern. 5. Original master pattern was generated by P/D/S menu option. 6. Production pattem added seam allowance, notchs was generated by P/D/S menu option. 7 Interative maker making process have enabled to save a wide range of time and space. 8. Measurement of garment by P/D/S measuring tools is to utilize in garment costing, quality control.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.142-144
• /
• 2003

3차원 apparel CAD system개발에 있어서 직물의 드레이프 모사가 걸림돌이 되어왔다. 최근 컴퓨터의 속도 개선으로 인해 정적 드레이프의 경우 데이블 보 문제와 같이 적절한 시간내에 드레이프 모사가 이루어지고 있다. 그러나 드레이프는 cloth와 body간의 충돌 검사에 많은 시간이 소요되므로 virtual fashion show와 같이 인체가 운동하는 동적 드레이프의 경우는 아직도 어려운 문제이다. (중략)