• 한국정보통신학회논문지
• /
• 제11권8호
• /
• pp.1415-1423
• /
• 2007

본 연구에서는 GSM1900 주파수 대역을 위한 이동통신 기지국용 Isohybrid를 개발함으로써 시스템의 효율을 증가시켰으며 제품의 소형화 및 안정된 특성을 구현하였다. 결과로서 각각 Chip coupler type과 Hybrid coupler type의 Isohybrid transmitter combiner를 설계 및 제작하였고 Insertion loss는 Chip coupler type Isohybrid의 경우에 $3.29\;dB{\sim}3.47\;dB$로 측정되었으며 Hybrid coupler type의 경우에는 $3.17\;dB{\sim}3.42\;dB$로 측정되어 3.5 dB 미만을 만족하였다. ANT단과 Port단 사이의 Isolation은 Chip coupler type Isohybrid의 경우에 $24.23\;dB{\sim}29.98\;dB$로 측정되었으며 Hybrid coupler type의 경우에는 $26.28\;dB{\sim}36.91\;dB$로 측정되어 23 dB 이상의 우수한 특성을 확인하였다.

• 대한간호학회지
• /
• 제32권5호
• /
• pp.727-734
• /
• 2002

This study was to determine the effect of DHEA administration before, during, and after dexamethasone treatment on body weight and TypeI,II muscle weight of rat receiving dexamethasone treatment. Method: Wistar rats were divided into 6 groups: control(C), dexamethasone(D), DHEA administration for 3days after dexamethasone treatment for 7days(7D+3DH), dexamethasone treatment for 7days after DHEA administration for 3days(3DH+7D), DHEA administration during dexamethasone treatment for 4days after dexamethasone treatment for 3days(3D+4DDH), DHEA administration during dexamethasone treatment for 7days(7DDH). Dexamethasone was injected by subcutaneously daily at a dose of 5mg/kg. DHEA was orally administered daily at a dose of 5mg/kg for 7 days. Soleus(TypeI) muscle, and both plantaris and gastro- cnemius(TypeII) muscles were dissected on the 7th day of experiment. Result: Body weight of both 3DH+7D group and 3D+4DDH group increased significantly compared with that of 7D group. Body weight of 7D+3DH group decreased significantly compared with that of 7D group, 7DDH group, 3DH+7D group and 3D+4DDH group. Muscle weight of both plantaris and gastro- cnemius tended to decrease compared with that of 7D group. Muscle weight of 7DDH group, 3D+4DDH group and 3DH+7D group increased significantly compared with that of 7D+3DH group. Muscle weight of gastrocnemius of both 3DH+7D group and 3D+4DDH group increased significantly compared with that of 7D group. Conclusion: Based on these results, it can be suggested that DHEA administration before and during dexamethasone treatment can increase both body weight and mass of atrophied TypeII muscle induced by dexa- methasone treatment.

• 복식문화연구
• /
• 제24권3호
• /
• pp.315-323
• /
• 2016

The present study is intended to study sole types necessary for shoe designs for elementary school students that are in age groups in growth periods, and 3D midsole design utilizing 3D printing technology. This study analyzed data from the 3D measurement of the feet of 1,227 elementary school students aged 7-13 years residing in the capital region conducted as part of the 6th Anthropometry of Size Korea. In addition, 3D midsoles by sole type were designed utilizing a Rhino CAD, and midsole prototypes were output utilizing a Zortrax-M200 3D Printer. Through a cluster analysis of sole shapes by type, sole shapes were classified into three types. Type 1 has small values of foot lengths and foot breadths, with large toe 1 angles and high arch heights. Type 2 has intermediate values of foot lengths and foot breadths, with small toe 1 angles and high arch heights. Type 3 has large values of foot lengths and foot breadths with small toe 1 angles and low arch heights. On reviewing the results of design of 3D midsoles by sole type, it can be seen that the midsoles were designed according to characteristics by sole type. The results of the sole type analysis in the present study are expected to be meaningful as basic data for the development of shoe insoles for elementary school students.

• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.652-659
• /
• 2008

This study was designed to testify the possibility and devise the method to manipulate the 3D body scan data to produce rounded-belt pattern adaptable to hip-type variation of women in their 20's. The results of this research were as follows : Firstly, based on drop-value distribution of hip and waist girth, 151 subjects were classified into three hip-types; Type 1 (15.23%) was 'cylinder type', showing lowest drop-value, Type 2 (69.54%) was 'average type' and Type3 (15.23%) was 'hourglass type' showing highest drop-value. Secondly, using CAD program, design lines for round shape belt were set on the surface of 3D scan data of representative subject of each type. And divided 3D surfaces were flattened onto the plane by the internal tools of CAD program. The measure, 'lifting value of round belt pattern', implying the level of curve ratio of pattern was higher in back than front. This result might be linked to the fact that the hip part is more protruded than the abdomen part. And the measures also showed highest values in Type 3(hourglass type) and lowest in Type 1(cylinder type), meaning that the pattern of Type 3 showed more rounded shape than that of Type 1. This finding implied that round belt for body type having high drop-value should be shaped more curved. Thirdly, difference ratios of outline length and area between 3D curves(body surface) and 2D plane(pattern) were 4.5% and 1.3%, respectively. This result demonstrated and solidified the feasibility of designing digital garment pattern from 3D body scan data.

• BMB Reports
• /
• 제41권7호
• /
• pp.542-547
• /
• 2008

D-type cyclins control the onset of cell division and the response to extracellular signals during the G1 phase. In this study, we transformed a D-type cyclin gene, Nicta;CycD3;4, from Nicotiana tabacum using an Agrobacterium-mediated method. A predicted 1.1 kb cyclin gene was present in all of the transgenic plants, but not in wild-type. Northern analyses showed that the expression level of the Nicta;CycD3;4 gene in all of the transgenic plants was strong when compared to the wild-type plants, suggesting that Nicta;CycD3;4 gene driven by the CaMV 35S promoter was being overexpressed. Our results revealed that transgenic plants overexpressing Nicta;CycD3;4 had an accelerated growth rate when compared to wild-type plants, and that the transgenic plants exhibited a smaller cell size and a decreased cell population in young leaves when compared to wild-type plants.

• Journal of the Korean Wood Science and Technology
• /
• 제36권3호
• /
• pp.1-8
• /
• 2008

볼트 간격에 따른 국내산 낙엽송 집성재 이중 볼트접합부의 내력성능을 검토하기 위하여 휨 type 전단강도실험을 실시하였다. 전단시편은 강판삽입형 볼트접합부 시편으로서 볼트구멍은 볼트직경(12 mm, 16 mm), 볼트 개수(단일 볼트 : Control, 이중 볼트), 볼트 열 방향(섬유평행 : Type-A, 섬유직교 : Type-B) 그리고 볼트 간격(Type-A : 4 d, 7 d, Type-B : 3 d, 5 d)을 달리하여 제작하였다. 조건에 따른 볼트접합부의 강도성능과 파괴형상을 비교, 검토하였다. 설계표준(KBCS, 2000)시 볼트간격이 감소된 기준허용전단내력에 대한 저감계수를 산출하였다. 본 연구의 결과는 다음과 같다. 1) 단일 볼트접합부와 Type-A의 이중 볼트접합부의 볼트 한 개당 지압응력은 볼트의 직경, 볼트 간격과 비례 관계를 보여주었다. Type-B의 지압응력은 볼트의 직경이 증가할 때 감소하였고, 볼트 간격이 증가할 때 2~10% 정도 감소하였다. 2) 단일 볼트접합부와 Type-A의 이중 볼트접합부의 파괴형상은 연단거리 방향으로 할렬파단이 일어났다. Type-B의 경우 볼트간격이 3 d일 때 인장부위 볼트가 압축부위 볼트보다 더 굴곡되었고 인장부위볼트에서 할렬파단이 시작되었다. 5 d 시편의 경우 인장부위와 압축부위 볼트의 굴곡은 비슷하게 나타났으며, 압축부위볼트에서 할렬파단이 시작되었다. 3) 설계표준시 기준볼트 간격(Type A : 7 d, Type B : 5 d)에 따른 항복하중을 무차원화시켜 저감계수를 산출하였다. 12 mm 볼트접합부의 경우 Type-A인 볼트 간격 4d와 단일 볼트접합부의 저감계수는 각각 0.87, 0.55였고 Type-B인 볼트 간격 3 d와 단일 볼트접합부의 저감계수는 0.91, 0.55였다. 16 mm 볼트접합부의 경우 Type-A인 볼트 간격 4 d와 단일 볼트접합부의 저감계수는 0.96, 0.76이었고 Type-B인 볼트 간격 3 d, 단일 볼트접합부의 저감계수는 0.91, 0.77이었다.

• 한국작물학회지
• /
• 제30권3호
• /
• pp.217-222
• /
• 1985

초형이 다른 3종의 수도 Isogenic line(Open-Spread- 및 Broom-type)을 5수준의 이앙밀도(47.62, 22.22, 15.15, 15.11 및 8.33주/$m^2$)와 4수준의 시비조건(증비, 보비, 감비 및 무비)에 공시하여 얻은 수량자료를 Multiple regression polynomial 수식으로 고정하고 편미분하여 밀도와 시비및 밀도$\times$시비의 작용력을 해석하였다. 그 결과는 다음과 갈다. 1. 소식조건하에서의 밀도변동에 따른 수량 반응은 Broom-type이 가장 높고 예민하였다(도 1). 2. 이앙밀도의 작용력〔$\delta$f(D, F)/$\delta$D〕은 Open-, 및 Spread-type이 다비에서 높아지는 대신에Broom-type은 시비와 관계없이 소식 및 밀식에서 높은 경향이었다.(도 2). 3. 시비율의 작용력 〔$\delta$f(D, F)/$\delta$D〕은 0~1000kg/10a 범위로서 Open- 및 Spread-type에서는 밀식조건하에서 높았으나 Broom-type에서는 소식조건하에서 소비 및 다비의 작용력이 큰 경향이었다(도 3). 4. Broom-type의 소식조건하에서 밀도$\times$시비의 상호작용력 〔$\delta$$^2$F(D, F)/$\delta$D$\delta$F〕은 음성을 나타내었고, Open- 및 Spread-type은 표준 및 밀식과 증비 조건에서 양성을 나타내었다(도 4). 5. $m^2$당 11~14주의 소식조건하에서 추정되는 소요시비수준은 Open-type 이 1.3~1.5배비인 반면에 Broom-type은 1.5배비 이상의 수준인 것으로 판단되었다. 6. 소식에 의한 이앙노동의 생력화를 위해서는 다비수용이 가능한 Broom-type의 연구가 필요할 것으로 해석이 된다.

• Current Optics and Photonics
• /
• 제4권6호
• /
• pp.545-550
• /
• 2020

We propose a hole-filling method to solve discontinuous depth representation and to reduce the visible seams and cracks that cause the limitation of the viewing angle of the three-dimensional (3D) image in the multilayer type 3D display system. The occlusion and the disocclusion regions between layers, such as the visible seams and cracks, are a major bottleneck of the multilayer type 3D display system to represent a volumetric 3D image by stacking multiple images. As a result, in the reconstructed 3D image, the visible seams and cracks appear as brighter overlapping and undesirable cut-off. In order to resolve the problems above, we applied the depth-fused effect to the sub-depth map generating algorithm and improve the viewing characteristics of the multilayer type 3D display. The experimental demonstrations are also provided to verify the proposed scheme.

• 복식문화연구
• /
• 제30권3호
• /
• pp.403-413
• /
• 2022

The purpose of this study was to develop a 3D mesh-type impact protection pad with excellent motion adaptability and functionality by applying 3D printing technology. The hexagonal 3D mesh, which constitutes the basic structure of the pad, comprises two types: small and large. The bridge connecting the basic units was designed as the I-type, V-type, IV-type, and VV-type. After evaluating the characteristics of the bridge, it was found that the V-type bridge had the highest flexibility and tensile elongation. The hip joint pad and knee pad were completed by combining the hexagonal 3D mesh structure with the optimal bridge design. The impact protection pad was printed using a fused deposition modeling-type 3D printer with a filament made of thermoplastic polyurethane material, and the protection pad's performance was evaluated. When an impact force of approximately 6,500N was applied to the pad, the force attenuation percentage was 78%, and when an impact force of approximately 8,000N was applied, the force attenuation percentage was 75%. Through these results, it was confirmed that the 3D-printed impact protection pad with a hexagonal 3D mesh structure connected by a V-shaped bridge developed in this study can adapt to changes in the body surface according to movement and provides excellent impact protection performance.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.225-229
• /
• 2014

A reflection-type three-dimensional (3D) screen using retroreflector is proposed to improve the visibility of a projected 3D image while keeping its perspective. For the projection-type 2D display, the diffuser is used to represent the 2D scene, overcoming the limitation of the aperture of the projection lens set. If the diffuser is adopted for the projected 3D image, only 2D images sectioned and blurred should be displayed on the screen. The proposed screen can make the 3D image with the aperture limitation visible to be applied to the 3D image projection systems. The feasibility of the proposed screen is verified by experiments.