• Journal of Korean Society of Disaster and Security
• /
• v.13 no.2
• /
• pp.53-63
• /
• 2020

In this study, the two-dimensional flow analysis model Hydro_AS-2D model was used to simulate the situation of flooding in Seongsangu and Uichang-gu in Changwon in the event of rising sea levels and extreme flooding, and the results were expressed on three-dimensional topography and the optimal evacuation path was derived using BIM technology. Climate change significantly affects two factors in terms of flood damage: rising sea levels and increasing extreme rainfall ideas. The rise in sea level itself can not only have the effect of flooding coastal areas and causing flooding, but it also raises the base flood level of the stream, causing the rise of the flood level throughout the stream. In this study, the rise of sea level by climate change, the rise of sea level by storm tidal wave by typhoon, and the extreme rainfall by typhoon were set as simulated conditions. The three-dimensional spatial information of the entire basin was constructed using the information of topographical space in Changwon and the information of the river crossing in the basic plan for river refurbishment. Using BIM technology, the target area was constructed as a three-dimensional urban information model that had information such as the building's height and location of the shelter on top of the three-dimensional topographical information, and the results of the numerical model were expressed on this model and used for analysis for evacuation planning. In the event of flooding, the escape route is determined by an algorithm that sets the path to the shelter according to changes in the inundation range over time, and the set path is expressed on intuitive three-dimensional spatial information and provided to the user.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.451-454
• /
• 2007

There is an inseparable relation between human race and engineering work. As world developed into highly industrialized society, a diversity of large structures is being built up correspondently to limited topographical circumstance. Though large structures are national establishments which provide us with convenience of life, there are some disastrous possibilities which were never predicted such as ground subsidence and degradation. It is very difficult to analyze the volume of total metamorphosis with the relative displacement measurement system which is now used and it is impossible to know whether there is structural metamorphosis within a permissible range of design or not. In this research with an object of 13-year-old earthen dam, through generating point-cloud which has 3D spatial coordinates(x, y, z) of this dam by means of 3D Laser Scanning, we can get real configuration data of slanting surface of this dam with this method of getting a number of 3D spatial coordinates(x, y, z). It gives 3D spatial model to us and we can get various information of this dam such as the distance of slanting surface of dam, dimensions and cubic volume. It can be made full use of as important source material of reinforcement and maintenance works to detect previously the bulging of the dam through this research.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.1
• /
• pp.57-65
• /
• 2007

Shallow water waves are hindcasted from sea wind fields, which include wave transformations such as shoaling, refraction, diffraction, reflection and wave breaking. In case of estimating sea wind field in shallow water, the sea wind revised from free wind obtained by the typhoon model is widely used. However, this method is not able to consider the effect of land topography on the wind field, which will be important factor for shallow water wave forecasting and hindcasting. In this study, therefore, the effect of land topography on sea wind field in shallow water is investigated for shallow water wave forecasting and hindcasting with high accuracy. The 3-D MASCON model is introduced to consider the influence of land topography on the wind field. And, for two areas divided by the topographical characteristics, i.e. shielded and opened coastal areas, sea wind field is examined by comparison between initial wind field by typhoon model and modified wind field by 3-D MASCON model. Finally, applying these sea wind fields to SWAN model, the results of shallow water wave calculated in shielded and opened coastal areas are compared, and, also, the effect of MASCON model on shallow water wave forecasting and hindcasting is discussed.

• Spatial Information Research
• /
• v.20 no.6
• /
• pp.129-137
• /
• 2012

For construction project in extreme cold region, it is essential to establish basic data on the site such as topographical data from the early stage of construction of planning and designing, and it is needed to frequently perform site investigation when necessary. However, extreme cold regions are characteristic of being at long distance and difficult in approaching, and special regions such as Antarctica, in particular, are hard to conduct site investigation. Although a site investigation may be conducted, those who can visit Antarctica are sufficiently limited so that most of the staff may participate in construction without knowledge of the site and increase the risk of errors in decision making or designing. In order to resolve such problems, the authors in this study identified methods of building wide-area topographical data and bedrock classification data of exposed areas via remote sensing and of building precise topographical data on the construction site. Also, the authors attempted to present methods by which such data can be managed and visualized integrally via three-dimensional GIS technology and all the participants in construction can learn sense of field and conduct necessary analysis as frequent as possible. The areas around the Jangbogo Antarctic Station were selected to be the research area for conducting effective integrational management and three-dimensional visualization of various spatial data such as wide-area digital elevation model, ortho-images, bedrock classification data, local precise digital elevation model, and site images. The results of this study may enable construction firms to analyze local environments for construction whenever they need for construction in extreme cold regions and then support construction work including decision making or designing.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.1
• /
• pp.58-66
• /
• 2010

In this paper, we have constructed high-resolution topographical map of macro-tidal Malipo beach through integration of terrestrial LiDAR measurement and MBES survey data at inter-tidal zone. To acquire the enough information of inter-tidal zone, we have done terrestrial LiDAR measurement mounted on the roof of vehicle with DGPS through go-stop-scan method at the ebb tide and MBES depth surveying with tide gauge and eye staff measurement for tide correction and MSL calculation at the high tide all together. To integrate two kinds of data, we have unified the vertical coordination standard to Incheon MSL. The mean error of overlapped inter-tidal zone is about 2~6 cm. To verify the accuracy of terrestrial LiDAR, RTK-DGPS measurement have done simultaneously and the difference of Z value RMSE is about 4~7 cm. The resolution of Malipo topographical map is 50 cm and it has constructed to DEM (Digital Elevation Model) based on GIS. Now it has used as an input topography information for the storm-surge inundation prediction models. Also it will be possible to use monitoring of beach process through the long-term periodic measurement and GIS-based 3D spatial analysis calculating the erosion and deposition considering with the artificial beach transition and coastal environmental parameters.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.232-238
• /
• 2007

In this research, we constructed a 3D riverbed surveying system that is able to acquire the topographical information of a riverbed in real-time. The system consists of a RTK-GPS receiver and a echo sounder for collecting simultaneously the position and the water depth information of riverbed. A program for data composition and transformation was designed to generate the 3D coordinates by combining data of a GPS receiver and a echo sounder and made GIS database construction easy. We extracted TIN, digital elevation model and cross sectional maps of the riverbed by using GIS software from 3D data constructed through test surveying. It was shown that the accuracy of the result was RMS error of 0.069m when compared with the existing methods which use a total station and staffs. It is expected that the 3D riverbed surveying system wiil be able to be utilized to various surveying for water resources management in rivers, sea, dams, storing reservoirs and so forth.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.105-115
• /
• 2008

In this study, we wished to forecast the damage district by tsunami's occurrence. For this, we analyzed tsunami that can happen in our country's neighborhood coast using past data, and established tsunami's scenario by imagination with analysis result. we created a 3D topographical model about study area and analyzed an inundation area by achieving simulation by scenario. Also, we produced an imaginary inundation map by overlaying the simulation results on digital map. This study result might be utilized as infra-technology for operation of tsunami's forecast/alarm system and establishment of disaster prevention policy.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2004

It's a very meaningful experimental study to image restoration of ancient villages vanished at the real life spatial world. Focused on Cheung-Pyung Lake around where most part were flooded by the Chung-Ju large dam founded in early 1980s, we used remote sensing technique in this study in order to restore topographical features before the flood with 3 dimensional effects. It was gathered comparatively good satellite photos and remotely sensed digital images, then its made a new color image from these and the topographical map which had been made before filled water. This task was putting together two kinds of different timed images. And then, we generated DEM(digital elevation model) including the outskirts of that area as harmonizing current contour lines with the map. That could be a perfect 3D image of Cheung-Pyung around before when it had been flood by making perspective images from all directions, north, south, east and west, for showing there in three dimensions. Also, flying simulation we made for close visiting can bring us to experience their real space at that time.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.95-106
• /
• 2015

Unused land is a new load of building and a linear improvement, expanding the loss of function of the road abandoned road construction sites, as well as existing roads is possible additional advantage. However, some space is overcharge checkpoints, materials yard, make this vehicle utilization and maintenance of the unfavorable situation, as vehicle rest area but unused land most of the space required for the use of the system management plan. We are analyzed the location, topographical features, cultural property and in the space which is geospatail open platform set up to classify the type of unused land. Depending on the type of unused land using the geospatial open platform performs a 3D model and a proposed model development and application taking into account the environment and landscape. To derive the Gangwon development Plan and design of future route unused land was becoming helps you make better use of unused land.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.261-264
• /
• 2007

In this study, I wished to forecast damage district by tsunami's occurrence. For this, analyzed tsunami that can happen in our country's neighborhood sea area using past data, and established tsunami's scenario by imagination with analysis result. I created 3D topographical model about study area and analyzed inundation area by achieving simulation by scenario. Also, result of simulation does overlay with digital map and manufactured imagination inundation map. This study result may offer as basic data for operation of tsunami's forecast/alarm system and making of disaster prevention policy.