• 한국의류산업학회지
• /
• 제10권3호
• /
• pp.385-388
• /
• 2008

Four kinds of PET fabrics were coated with Copper and Nickel by electroless chemical plating, and the electromagnetic wave shielding effectiveness for those samples have been examined. The shielding effectiveness showed between 90 dB and 70 dB, and it related to the fabric structure, such as cover factor and cloth density. The dense fabric structure showed the better shielding effect.

• 패션비즈니스
• /
• 제19권5호
• /
• pp.1-16
• /
• 2015

The appearances and geometry structures of knitted fabrics have important effects on their functions as textile fabrics. Structural design of the woven fabric, prior to the manufacturing processes in the weaving mill, often leads to a similar predictable appearance in the final outcome with the corresponding weave design. The increase of the employment of elastic textile yarns in knitting fabrics for comfort stretch or outdoor sports wear knit products has, however, resulted in difficulties in predicting the final appearance of the knit structure design. Due to the stretchability and exceptional recovery behavior of the elastic yarns such as polyurethane elastomeric yarns, the appearance of the final product often differs from the initial knit design. At textile CAD program for preparing tricot knit designs has been employed in this study to predict the two dimensional appearance of the design. The similarities between the designs and corresponding knit products seem to be acceptable for the two-dimensional textile CAD program in this study. However, when elastomeric yarns are partially employed in the polyester filament tricot product, a considerable amount of departure from the design is apparent due to the constriction and/or deformation of property differences in the elastomeric yarns and polyester filament yarns. Therefore, another purpose of this study is to measure the departure of the final tricot product from the initial tricot design, especially in the case employing elastomeric yarns in the knit structure together with regular polyester filament yarns. For measuring the three-dimensional departure, a 3D scanning system has been used for the mesh reconstruction of the fabric specimen. Hopefully, the result from this study will be used as a guide to modify and improve the current textile CAD program proposed for the two-dimensional simulation of the tricot.

• 한국염색가공학회지
• /
• 제7권4호
• /
• pp.87-96
• /
• 1995

Colorant concentrates are prepared by use of concentration method of colorants extracted from Sappan wood using met hanol. Dyeabilities and fastness properties of silk fabrics dyed with concentrate of Sappan wood are investigated.The results obtained are as follows; 1. The storage stability of colorant concentrate is poor as concentration is excess. 2. Because the colors of dyeings are different with mordants, aluminium acetate, copper acetate, chromium alum and tin chloride are used in order to obtain reddish color. 3. The optimum dyeing temperature and dyeing time are 6$0^{\circ}C$ and 60 min, respectively. 4. Dry cleaning fastness is very good, and light fastness and washing fastness are low. 5. The dyeing method is simple owing to usehess of colorant concentrate prepared without extraction of colorant every time.

• 한국의류산업학회지
• /
• 제24권4호
• /
• pp.451-459
• /
• 2022

This study aimed to develop a a custom-made dress form for draping using a live model's 3D body scan obtained from an entry-level 3D handheld scanners, 3D modeling software and 3D printing technology. A female subject was recruited whose body size fell under the normal (N) body shape criteria suggested by KS K 0051. First, the handheld scanner reduced the length of the legs in scanning, but most of the scanning operations between the neck and crotch levels were conducted accurately. Therefore, this study was designed to develop a torso dress form. The full body 3D scan was edited into a torso shape using ZBrush® software. Using Rhinoceros^® and Materialise's Magics software, a 3D body scan was modeled so that the user could fit two types of mannequin stands (one with a neck fixation from above and one with an insert from below) to the dress form. The body scan was divided into 9 pieces to fit the printable size of the Stratasys 3D printer Fortus 250mc, and the cross-sectional distance from the center to the periphery was downsized by 2 mm. After outputting the dress form scan file with a 3D printer, the dress form was manufactured by the first covering it with a 4 oz nonwoven pad and the second covering with a single jersey material.

• 한국의류산업학회지
• /
• 제14권6호
• /
• pp.992-1000
• /
• 2012

This study develops a traditional green fabric pattern design through an apparel CAD system. The method used simulated stage costumes and evaluated the consumer satisfaction connected with a 3D fitting system. The results are as follows. Computerization of the pattern making process can provide higher accuracy and efficiency in apparel pattern making and marking for green fabrics. A Stage costumes design was developed; subsequently, the developed dress patterns are automatically depicted to the input of the body size of the consumer and marked using marking program. This results show that it has an effect on narrow and expensive green fabrics. Stage costumes design can make a simulation by a 3D Fitting system. The results of this study can provide higher consumer satisfaction through a survey of 30 consumers. Stage costumes should attract the sympathy of the spectators. The Acceptance of Andong region's traditional beauty is required. We found that a relationship of performance and clothes, physical functionality and beauty of costumes, possibility of commercialization, and the possible use of a 3D Fitting system use are evaluated. A continuous study of regional culture resources is required since there is a significant possibility for the long-term development of stage clothes.

• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.676-682
• /
• 2008

In this study a guideline of the 3D-fit pattern for the ECG(electrocardiogram) measurement of elderly's u-healthcare clothes was proposed. In the screening test of the ECG measurement band, ECG peak band was observable at the band pressure of 0.20 kPa. By employing a 3D body image, tight-fit 3D patterns were made at two different reduction rates of 21%(pattern 1) and 33%(pattern 2), and corresponding pressure of both of the clothes were 0.25 kPa and 0.54 kPa, respectively. Typical waves of ECG were found in both stationary and moving position. In terms of the subjective evaluation of the u-healthcare clothes when worn, it was confirmed that reduction pattern 1(0.25 kPa) conveyed comfortable clothing pressure and pleasantness, which is very close to the result of screening test of ECG band experiment. As results, it is recommended that reduction rate should be adjusted, so that clothing pressure is about 0.2 kPa for the elderly's comfortable and efficient u-healthcare clothes.

• 한국의류산업학회지
• /
• 제15권2호
• /
• pp.247-255
• /
• 2013

This study develops size sections and specifications for females 7-18 years old. The specifications will contribute to the development of precise virtual models that represent basic data for the size alteration of 3D virtual models. A total of 33 items from the $5^{th}$ Size Korea data set were adopted and analyzed. Two representative factors (Obesity and Height Factors) were identified through a factor analysis of the 33 items. Waist circumference and stature were selected as representative variables for Obesity and Height Factors, respectively, and conducted cross tabulations between waist circumference and height for the age groups of 7-12 and 13-18 year-olds. Size sections were developed for the development of 3D models based on the results. A regression analysis then developed size specifications for each section with independent variables of waist circumference and height as well as dependent variables of reference body size. Subsequently, Obesity Factors were better explained by waist circumference and Height Factors were better explained by stature. Finally, size specifications for each section were developed.

• 한국의류산업학회지
• /
• 제22권6호
• /
• pp.826-833
• /
• 2020

When it is necessary to wear masks for long periods, such as during the current COVID-19 pandemic, the essential function of masks to prevent contamination (or transmission to others) as well as comfortableness are important. For this study, we used three-dimensional (3D) facial measurements of adult women to compile basic face shape data for designing comfortable and effective masks. This study analyzed the 3D facial data of 127 subjects in their 20s to 30s of the 6th Size Korea. Factor analysis of the survey data produced seven factors that formed the composition of adult female faces. These factors combined to produce three facial types: square (long face and a large lower middle face), oval (smallest central and lower body in the middle), and triangle (short face with a small central and lower large nose). These types reflect that the facial types of adult women show the differences in the nose angle, nose length, bitragion-subnasal arc, bitragion-menton arc. Therefore, properly fitting masks for fine dust particle filtration require 3D customization of a mask's breathing apparatus to fit differently shaped central and lower face parts that interfere with mask fit.

• 패션비즈니스
• /
• 제27권6호
• /
• pp.1-17
• /
• 2023

This study aimed to develop a modern textile design based on the formability of Frank Stella's paintings and to develop and present a fashion design that combines modern sensibility as a 3D virtual clothing program. The formative characteristics of Frank Stella's work were 'unity due to regular stripes', 'asymmetry due to geometric surface division', and 'decorabilitydue to colorful use'. Based on this, costume patterns and textiles based on Frank Stella's paintings were developed and six 3D virtual fashion design works were produced. The conclusion was as follows. First, it was confirmed that Frank Stella's work has a very wide range of applications to fashion products as abstract expression and minimal simplicity coexist visually. Second, various colors and forms of Frank Stella's paintings could be developed using textiles with visual formability, and originality as a fashion work applied with paintings could be maximized. Third, the development of 3D fashion using virtual programs had the ease of time efficiency, cost reduction, and spatiotemporal expansion of work processing compared to the actual costume production process. In addition, the simulation of 3D virtual wear made it easy to modify and recover the position of the textile to be applied to the costume and create a new design in the process of transforming the position of various textiles. It is expected that this study results will be used as basic data for the future conversion content industry in the painting and fashion industries.

• 한국의류산업학회지
• /
• 제19권3호
• /
• pp.312-319
• /
• 2017

The purpose of this study was to develop a customized wrist brace using 3D scanner and 3D printer. This study included in-depth interviews with people who had wrist pain and ever used wrist braces. The wrist brace has been designed and modeled by the CAD program after 3D scanning the wrist of subjects. Based on the results of the in-depth interviews on wrist brace users and design investigation in the market, a prototype of the wrist brace has been created. The wrist brace does not compress the hand and is easy to put on. In addition, it is adjustable to the wrist of users, allowing them to move his or her wrist without any restrictions. A computer-modeling program produced solid files for the design of the wrist brace after 3D scanning ten subjects' hands. It features a lattice-patterned surface, a velcro adjustment and trimming to smoothen the surface. PLA filaments were used to 3D print the wrist brace. As for the assessment, the wrist brace has been evaluated to be easy to put on and adjust to user's wrist. However, when it comes to appearance and comfortability, it was rated 3.0 or slightly above. This is because 3D printing materials are firm and not flexible compared to other materials such as neoprene or stretchable bands.