• 동력기계공학회지
• /
• 제14권3호
• /
• pp.5-12
• /
• 2010

The purpose of this study is to analyze heterogeneous distribution of branch-like structure at downstream region of inner spray. The previous many studies about diesel spray structure have yet stayed in the analysis of 2-D structure, and there are very few of informations which are concerned with 3-D analysis of the structure. The heterogeneous distribution of droplets in inner spray affects the mixture formation of diesel spray, and also the combustion characteristics of the diesel engines. Therefore, in order to investigate 3-D structure of evaporative spray the laser beam of 2-D plane was used in this study. Liquid fuel was injected from a single-hole nozzle (l/d=5) into a constant-volume vessel under high pressure and temperature in order to visualize the spray phenomena. The incident laser beam was offset on the central axis. From the images analysis taken by offset of laser beam, we examine formation mechanism of heterogeneous distribution by vortex flow at the downstream of the diesel spray. As the experimental results, the branch-like structure formed heterogeneous distribution of the droplets consists of high concentration of vapor phase in the periphery of droplets and spray tip of branch-like structure. Also the 3-D spatial structure of the evaporative diesel spray can be verified by images obtained from 2-D measurement methods.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.201-202
• /
• 2017

In this paper, we classify 3D printer technologies which are becoming a recent issue, and analyzed the features and limitations of the technology. As a result, we can see that there is no 3D printer technology that can produce a completely free-curved architectural structure. In order to construct a completely free-curved architectural structure with a 3D printer, it is necessary to draw up a new concept technique that complements the drawbacks of the two methods.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.170-176
• /
• 2005

Analysis of structures which are composed of numerous repeated unit structures can be simplified by using homogenized properties. If the unit structure is repeated in one direction, the whole structure may be regarded as a beam. Once the effective stiffness is obtained from the analysis of the unit structure in a proper way, the effort for the detail modeling of the global structure is not required, and the real structure can be replaced simply with a beam. This study proposes a kinematical periodicity constraint to be imposed on the FE model of the unit structure, which improves the accuracy of the effective stiffness. The method is employed to a one dimensionally arrayed 3D structure containing periodically repeated un-symmetric holes. It is demonstrated that the deformation behavior of the homogenized beam agrees well with that of the real structure.

• 항공우주시스템공학회지
• /
• 제11권1호
• /
• pp.28-34
• /
• 2017

유한요소해석을 이용하여 이물질이 고무 오링과 구조물에 미치는 영향과 성능을 연구했다. 오래전부터 2D 해석을 이용하여 초탄성 오링을 연구해왔다. 오링 설계 시, 접촉응력은 중요한 설계 요소이다. 접촉 응력이 가해진 압력보다 낮으면 누수, 진동, 소음, 출력 저하의 원인이 된다. 이 연구에서는 초탄성 오링을 2D와 3D로 해석하고 결과를 비교한다. 2D와 3D의 접촉 응력 결과는 거의 비슷하게 나타난다. 이물질이 있는 오링은 3D로 모델링해야하는데 모든 방향의 접촉 응력을 고려해야하기 때문이다. 3D 해석에서 간극을 달리하여 10가지 경우로 나누어 이물질이 오링과 구조물에 미치는 영향을 확인했다. 또한 접촉 응력이 가해진 압력보다 높은지 확인하였다. 따라서, 이물질이 포함된 오링은 3D 모델로 해석되어야하며 이러한 결과는 오링 설계에 포함된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권3호
• /
• pp.55-63
• /
• 2022

모듈러 지중아치 구조는 시공과정이 단순하며 강재와 콘크리트를 이용하여 시공 및 공용 중에 발생하는 단면력에 대하여 효과적으로 저항할 수 있는 구조로 제안되어 15m 이하의 지간에 대하여 3차원 구조해석 및 실험을 통하여 구조적 거동이 평가되었다. 일반적으로 지중아치와 터널 등의 구조해석의 경우 2차원이나 3차원 구조해석 방법이 적용될 수 있다. 하지만, 모듈러 지중아치 구조의 구조적 안전성 평가를 위하여 2차원이나 3차원 구조해석 방법을 적용할 경우 구조해석을 위한 모형화가 어렵고, 해석시간이 과도하게 오래 걸릴 수 있으므로, 모듈러 지중아치 구조의 설계과정에서 필요한 구조 안전성 및 토압 등을 고려한 구조해석 방법으로는 합리적이지 않을 수 있다. 또한, 사전에 결정된 단면이 적용가능한 지간에 대하여 모듈러 지중아치 구조를 구성하는 경우 지간과 하중조건에 따른 단면과 구조적 안전성만을 평가하는 것이 합리적일 수 있다. 따라서, 본 연구에서는 효율적인 구조 안전성 평가를 위하여 프레임 요소를 이용한 구조해석 모델을 제안하고, 2차원 구조해석모델과 프레임 요소를 이용한 간략해석모델의 구조해석 결과를 비교하였으며, 간략해석 방법을 이용하여 20m지간의 모듈러 지중아치구조의 구조적 안전성을 평가하였다.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.618-625
• /
• 2011

This paper presents a double excited three degree-of-freedom (3DOF) motor. The proposed 3DOF motor is designed with a laminated structure, making it easy to manufacture. In addition, it has windings on the stator and rotor, and does not require an expensive permanent magnet. We explain the structure, principle of motion, and design of the proposed motor, and perform an analysis of the static characteristics using the two- and three-dimensional finite element methods (3D FEM). The feasibility of 3D FEM analysis is confirmed by comparing the 3D FEM analysis and experimental results for the rolling and pitching motion. We also confirm the occurrence of holding torque in every motion.

• 농약과학회지
• /
• 제7권1호
• /
• pp.1-11
• /
• 2003

새로운 농약을 탐색하고 개발하는데 있어서 고효율 유기함성 (HTOS) 기술과 고효율 검색 (HTS) 기술 등의 발전과 더불어 컴퓨터 화학을 이용한 분자설계 (CAMD) 방법으로 보편화되고 있는 비교 분자장 분석(CoMFA)과 비교 분자 유사성 지수분석(CoMSIA) 등, 3D QSAR 기법들을 위시하여 분자 홀로그램 구조 - 활성관계 (HQSAR) 분석방법 등, QSAR 기법들을 요약하고 그 활용 사례들을 간략하게 소개하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권2호
• /
• pp.25-29
• /
• 2006

Analysis of structures which are composed of numerous repeated unit structures can be simplified by using homogenized properties. If the unit structure is repeated in one direction, the whole structure may be regarded as a beam. Once the effective stiffness is obtained from the analysis of the unit structure in a proper way, the effort for the detail modeling of the global structure is not required, and the real structure can be replaced simply with a beam. This study proposes a kinematical periodicity constraint to be imposed on the FE model of the unit structure, which improves the accuracy of the effective stiffness. The method is employed to a one dimensionally arrayed 3D structure containing periodically repeated unsymmetrical holes. It is demonstrated that the deformation behavior of the homogenized beam agrees well with that of the real structure.

• 한국BIM학회 논문집
• /
• 제4권3호
• /
• pp.1-9
• /
• 2014

As BIM application continues to increase in civil engineering, in this study, 3D information model for RC(Reinforced Concrete) bridge pylon was developed and verified its effectiveness at the structural-design stage. To define 3D information model of RC A-Type pylon, characteristics of pylon were analyzed and 3D model structure was constructed. The 3D information model, one of the core product of BIM, manages all information generated during all life-cycle of a structure and consequently maximizes the efficiency of utilizing information. Also, this study proposes interface module between input data in structural analysis and 3D model of RC pylon. The module can create the input data for non-linear structural analysis. It is essential to study on method of developing 3D information model and propose a structural analysis model by utilizing 3D model for the effective use of BIM techniques in construction industry. The results of this study can be used as the base data for developing the 3D information model of RC pylon in the structural analysis field.

• 한국자동차공학회논문집
• /
• 제20권3호
• /
• pp.67-76
• /
• 2012

In this paper, collision analysis of the full rake for the Next Generation High-speed EMU is conducted using a 3D/1D hybrid model, which combines 3-dimensional (3D) front-end structure of finite element model and 1-dimensional (1D) multi-body dynamics model in order to analyze train collision with a standard 3D deformable obstacle. The crush forces, passengers' accelerations and energy absorptions of a full rake train can be easily obtained through a simulation of a 1D dynamics model composed of nonlinear springs, dampers and masses. Also the obtained simulation results are very similar to those of a 3D model if an overriding behavior does not occur during collision. The standard obstacle in TSI regulation has been changed from a rigid body to a deformable body, and therefore 3D collision simulations should be conducted because their simulation results depends on the front-end structure of a train. According to the obstacle collision analysis of this study, the obstacle collides with the driver's upper structure after overriding over the front-end module. The 3D/1D hybrid model is effective to evaluate a main energy-absorbing module that is frequently changed during design process and reduce the need time of the modeling and analysis when compared to a 3D full car body.