• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.751-756
• /
• 2002

Since the operation of the first satellite-based navigation services, satellite positioning has played an increasing role in both surveying and navigation, and has become an indispensable tool for precise relative positioning. However, in some situations, e.g. at a low angle of elevation, the use of satellites for navigation is seriously restricted because obstacles like buildings and mountains can block signals. As a mean to resolve this problem, the quasi-zenith satellite system has been proposed as a next-generation satellite navigation system. Quasi-zenith satellite is a system which simultaneously deploys several satellites in a quasi-zenith geostationary orbit so that one of the satellites always stay close to the zenith if viewed from a specific point on the ground of East Asia. Thus, if a position measurement function compatible with GPS is installed in the quasi-zenith and stationary satellites, and these satellites are utilized together with the GPS, four satellites can be accessed simultaneously nearly all day long and a substantial improvement in position measurement, especially in metropolitan areas, can be achieved. The purpose of this paper is to evaluate the effectiveness of quasi-zenith satellite system on positioning accuracy improvement through simulation by using precise orbital information of the satellites and a three-Dimensional digital map. Through this simulation system, it is possible to calculate the number of simultaneously visible satellites and available area of the positioning without the need of actual observation.

• Journal of Industrial Convergence
• /
• v.20 no.7
• /
• pp.57-64
• /
• 2022

There are various structures in the underground space, and the structures is managed as 3D data in Integrated Underground Geospatial Map Management System(IUGMMS). The worker transmits and updates the integrated map including the changed underground geospatial data to IUGMMS with the completed book submission program. However, there is a problem in that the transmission time and the update time is delayed because the size of the integrated map file is large. In this paper, we try to extract and transmit only the changed integrated map by obtaining and comparing each spatial characteristic information of the integrated map. As a result of the experiment, the transmission time of the suggestion method is short and the update time is also short than the transitional method because the suggestion method transmits only the integrated map including the changed underground geospatial data. As a result, it was possible to reduce the delay time in transmitting and updating the changed integrated map.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8C
• /
• pp.788-799
• /
• 2007

This paper presents a watermarking method for copyright protection and illegal copy prevention of mobile 3D contents. The proposed method embeds copyright information and user's phone number into spatial domain and encryption domain of mobile animation data based on Buyer-Seller watermarking protocol. Furthermore, we insert user's operation key so that only authorized user can play 3D animation game in mobile device. We implemented the proposed method by using mobile animation tool, G3-SDK. From experimental results, we verified that the proposed method is capable of copyright protection and illegal copy prevention since the watermark can be well extracted against geometrical attacks, such as noise addition, data accuracy variableness and data up/down scaling.

• Journal of Korean Association for Spatial Structures
• /
• v.24 no.1
• /
• pp.47-55
• /
• 2024

The aim of this study is to evaluate the possibility of damage to cultural assets resulting from vibrations generated by construction vehicle traffic. The cultural heritage's natural vibration frequency was determined to be 150Hz by measurement. The damping ratios were calculated as 4.7% using the logarithmic decrement approach and 4.3% using the half-power method. The vibration measurements obtained during vehicle operation indicated that, despite an increase in vehicle velocity of up to 15 km/h, the vibrations remained below the detectable level of 0.13 mm/sec. When the road is curved and the terrain is sloped, a suitable speed for vehicle operation was found to be around 17 km/h, at which point vibrations were seen. The highest recorded vibration amplitude at this velocity was 0.217 mm/sec, which remains below the stringent regulation limit of 2 mm/sec. Thus, it can be concluded that there is no actual harm caused by vibrations.

• Journal of Korea Spatial Information System Society
• /
• v.12 no.1
• /
• pp.18-27
• /
• 2010

In u-GIS environment, GeoSensor environment requires that dynamic data captured from various sensors and static information in terms of features in 2D or 3D are fused together. GeoSensors, the core of this environment, are distributed over a wide area sporadically, and are collected in any size constantly. As a result, storage space could be exceeded because of restricted memory in DSMS. To solve this kind of problems, a lot of related studies are being researched actively. There are typically 3 different methods - Random Load Shedding, Semantic Load Shedding, and Sampling. Random Load Shedding chooses and deletes data in random. Semantic Load Shedding prioritizes data, then deletes it first which has lower priority. Sampling uses statistical operation, computes sampling rate, and sheds load. However, they are not high accuracy because traditional ones do not consider spatial characteristics. In this paper 'Pre-Filtering based Post Load Shedding' are suggested to improve the accuracy of spatial query and to restrict load shedding in DSMS. This method, at first, limits unnecessarily increased loads in stream queue with 'Pre-Filtering'. And then, it processes 'Post-Load Shedding', considering data and spatial status to guarantee the accuracy of result. The suggested method effectively reduces the number of the performance of load shedding, and improves the accuracy of spatial query.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.10
• /
• pp.563-572
• /
• 2015

The purpose of this study was to model the effect of flushing discharge on algae removal by multi-purpose weir operation in Yeongsan River (Seungchon Weir) using a 3-dimensional (3D) model. The chlorophyceae Eudorina sp. formed bloom in May 2013. Flushing discharge was conducted in two different ways for algal bloom reduction. To elucidate the spatial variability, a high-resolution 3D model, ELCOM-CAEDYM, was used to simulate the spatial variations of water quality and chl-a over a month. The results showed that ELCOM-CAEDYM could reproduce highly spatially resolved field data at low cost, and showed very good performance in simulating the pattern of algal bloom occurrence. The effect of each flushing discharge operation was analyzed with the results of modeling. The results of case 1, flushing discharge using an open movable weir, showed that the algal bloom between the Seochang Bridge and the Hwangryong River junction is rapidly flushed after operating the movable weir, but the residual algae remained in the weir pool as the discharge decreased. However, the results of case 2, fixed weir overflow with a small hydropower stop, showed that most of the algae was removed after flushing discharge and the effect of algae removal was much bigger than that in case 1, as per modeling results and observed data.

• Spatial Information Research
• /
• v.20 no.2
• /
• pp.1-11
• /
• 2012

In the current construction planning and designing process, an architectural miniature model was designed to verify the interior or exterior spatial sense of a building structure, but building of the miniature model is demand much more effort and time; in addition to this it has limitation to identify interior information of the building. For a complement of it, CAD would be used in the existing planning and designing process to visualize the building information, but its visualization is not satisfactory for the 3D volume which could be easily verified with the miniature model. CAD is the specific software for designing building structures and the 3D results are usually rendered on 2D monitor screen. Therefore, there is a shortage of cognitive immersion for the 3D space. In this paper, we introduce the conversion process of BIM shape data into the Augmented Reality contents by using a series of softwares. As a result of modification on construction plan or design we reduced the cost and time to reconstruct the final visualization. We have shown that the interior or exterior information of the building structures are easily visualized with BIM shape data on augmented reality environment. Several proposed interaction methods, such as rem oval of building components, and slice-cut operation, provide the user for the effective manipulation of models on the augmented reality environment.

• Journal of Korea Game Society
• /
• v.11 no.6
• /
• pp.103-113
• /
• 2011

In this paper, we propose gesture recognition based 3D Serious Games to prevent dementia. These games are designed to enhance the effect of preventing dementia by helping increase brain usage and physical activities of users by the entire body gesture recognition. The existing cameras used for gesture recognition technology are limited in terms of recognition ratio and operation range. For more stable recognition of the body gestures, we recognized users with a 3D depth camera, obtained joint data of users, and analyzed joint motions to recognize gestures of the body. Game contents were designed to practice memory, reasoning, calculation, and spatial recognition focusing on the atrophy of brain cells as a major cause of dementia. Game results of each user were saved and analyzed to measure how their recognition skills improved.

• Spatial Information Research
• /
• v.15 no.2
• /
• pp.169-180
• /
• 2007

Applicability of Land-based MMS(Mobile Mapping System) having been increased gradually as digitalization of administrative operation and construction of integrated systems of the government and provincial government are growing up. As these requirements, the case can be occurred that the facilities should be surveyed rapidly in the specific area. At this case, the real time field processing method is more necessary than the post processing method and data processing speed should be an essential element as important as accuracy. In this study, the two space intersection methods used in photogrammetry were programmed and compared with each other to select more proper method for the three dimensional positioning in the field processing. Especially, at the analytic space intersection, the traditional close range terrestrial photogrammetry was modified and applied to that to adapt to MMS's characteristics that camera position and attitude are changed according to the vehicle movement. As a result, the difference of the accuracy between two methods is not significant but at the calculation time, the analytic space intersection is faster three times than the space intersection using collinearity condition.

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.89-97
• /
• 2018

The purpose of this reaserch is to analyze the charateristics of water quality in space through the operation of ARA River in Artificial Rivers of the Brackish Water Zone. The spatial distribution measured water temperature and salt levels for the surface, middle and deep layers by dividing the four areas of Incheon, Sicheon, Gyeyang and Gimpo. Water temperature did not vary much by water depth and branch, and its purpose is to maintain stable water environment through correlation analysis and operation. To examine the temporal and spatial distribution patterns of the Arachon, we measured DO on the Incheon branch, Sicheon, Gyeyang and Gimpo branch twice a month, and on the surface, the temperature level, The water temperature did not vary much by depth and location, and the water temperature in January and March tended to rise from Incheon to Gimpo, with the average difference of 1.1 degrees during the same period. The salinity difference between Incheon and Gimpo sites was 3.3 psu deep and 5.4 psu deep. In particular, floodgates from July to September are found to be less than 10psu overall, which is considered to be a gas due to the effects of floods and the inflow of Gulpo Stream. D.O. is located in some areas due to summer rains. The hypoxic layer has been identified.Analysis of seasonal data shows that water temperature and DO are strongly correlated in autumn. It was found that the water temperature and salt levels in the fall showed a weak correlation.