• Journal of Radiation Protection and Research
• /
• v.41 no.2
• /
• pp.167-171
• /
• 2016

Background: TlBr is of considerable technological importance for radiation detection applications where detecting high-energy photons such as X-rays and ${\gamma}$-rays are of prime importance. However, there were few reports on investigating optical properties of TlBr itself for deeper understandings of this material and for making better radiation detection devices. Thus, in this paper, we report on the optical characterizations of TlBr single crystals. Spectroscopic ellipsometry (SE) and photoluminescence (PL) measurements at RT were performed for this work. Materials and Methods: A 2-inch TlBr single crystalline ingot was grown by using the vertical Bridgman furnace. SE measurements were performed at RT within the photon energy range from 1.1 to 6.5 eV. PL measurements were performed at RT by using a home-made PL system equipped with a 266 nm-laser and a spectrometer. Results and Discussion: Dielectric responses from SE analysis were shown to be slightly different among the different samples possibly due to the different structural/optical properties. Also from the PL measurements, it was observed that the peak intensities of the middle samples were significantly higher than those of the other two samples. With the given values for permittivity of free space (${\varepsilon}_0=8.854{\times}10^{-12}F{\cdot}m^{-1}$), thickness (d = 1 mm), and area ($A=10{\times}10mm^2$) of the TlBr sample, capacitances of TlBr were 6.9 pF (at $h{\nu}=3eV$) and 4.4 pF (at $h{\nu}=6eV$), respectively. Conclusion: SE and PL measurement and analysis were performed to characterize TlBr samples from the optical perspective. It was observed that dielectric responses of different TlBr samples were slightly different due to the different material properties. PL measurements showed that the middle sample exhibited much stronger PL emission peaks due to the better material quality. From the SE analysis, optical, dielectric constants were extracted, and calculated capacitances were in the few pF range.

• KSBB Journal
• /
• v.31 no.4
• /
• pp.277-283
• /
• 2016

In this system, rice cells were genetically modified to express human cytotoxic T-lymphocyte antigen 4-immunoglobulin (hCTLA4Ig) using RAmy3D promoter induced by sugar depletion. Even though the target protein fused with signal sequence peptide, plant cell wall can be a barrier against secretion of recombinant proteins. Therefore, hCTLA4Ig can be trapped inside cell wall or remained in intracellular space. In this study, to enhance the secretion of hCTLA4Ig from cytoplasm and cell walls into the medium, permeabilizing agents, such as dimethyl sulfoxide (DMSO), Triton X-100 and Tween 20, were applied in transgenic rice cell cultures. When 0.5% (v/v) of DMSO was added in sugar-free medium, intracellullar hCTLA4Ig was increased, on the other hand, the secreted extracellular hCTLA4Ig was lower than that of control. DMSO did not give permeable effects on transgenic rice cell cultures. And Triton X-100 was toxic to rice cells and also did not give enhancing permeability of cells. When 0.05% (v/v) Tween 20 was added in rice cell cultures, however, intracellular hCTLA4Ig was lower than that of control cultures. And the maximum 44.76 mg/L hCTLA4Ig was produced for 10 days after induction, which was 1.4-fold increase compared to that of control cultures. Especially, Tween 20 at 0.05% (v/v) showed the positive effect on the secretion of hCTLA4Ig though the decrease of intracellular hCTLA4Ig. Also, Tween 20 as a non-toxic surfactant did not affect the cell growth, cell viability and protease activity. In conclusion, secretion of hCTLA4Ig could be increased by enhancing permeability of cells regardless of the cell growth, cell viability and protease activity.

• Journal of Families and Better Life
• /
• v.28 no.1
• /
• pp.131-143
• /
• 2010

The purpose of this study is to understand the living culture of transnational married women and to analyze the out door play of children in their hometown. The data was collected through observation from 27th June to 7th July 2008 in Jian, Jilin Province China. The children's play and lifestyles were observed, and data pertaining to the culture of the people were collected by a teacher and staff. We also visited the residents for housing information. The results are given below. 1. They dressed in Korean clothes on festive days and the boys put on a hood. They had eating habits which included cooking for themselves or buying semi-manufactured goods but did not use, instant food. The housing habits involved a combination of cooking and heating by Korean floor heating system(Ondol). They utilized outdoor space to grow vegetables. Those with a fulltime job(teacher) preferred to live in an apartment but an apartment was too expensive. Public utility charges and traffic expenses were cheap. 2. The main festive days are the lunar New Year's Day and Chuseok. The children returned home and enjoyed the festive day with their parents. The language used are Korean language and Chinese. Some Korean words and phrases in Jian Joseonjok have different meanings as compared to how they are used in Korea. A capping ceremony did not to celebrate becoming an adult from an adolescent. Couples performed a wedding ceremony at a wedding hall attended by their parents and invited relatives from both families. The relatives gave the couple a wedding gift. They did not go on a wedding trip as it was not affordable but instead spent their wedding night at a hotel in this culture. When someone dies, they bury the body after cremation. They perform a memorial service for three years on the birthday of the departed. They have a banquet on the 60th birthdays with their relatives and neighbours and are typically presented with a carp for longevity. 3. They understand capitalism and therefore send their children to school to improve their social position. The Korean and Chinese languages are required subjects in school. The students choose a second language(English or Russian). They prefer English class but at the time of this study an English class was not offered at the school in Jian Joseonjok. Therefore the children entered a Chinese school. 4. The children play outdoor games such as Y$\acute{a}$o J$\grave{i}\bar{a}$(要家), X$\grave{i}$ang g$\grave{i}$(象棋), T$\grave{i}\grave{a}$o p$\acute{i}$ j$\grave{i}$n(r)(跳皮節), D$\grave{o}$uch ing g$\grave{u}$n 凍冷根, B$\bar{e}$i B$\bar{e}$i 背背, and soccer. They play games according to the season.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.3
• /
• pp.87-94
• /
• 2002

Recently, there have been numerous attempts to expand the traditional temporary soil nailing system into a permanent wall. Two reasons for this include the soil nailed system's advantage of efficient and economic use of subgrade space and its ability to decrease the total construction cost. However, the systematic and logical design approach has not been proposed yet. The permanent soil nailing wall system, which utilizes precast concrete from soil nailing system, is already used in many countries, but the study of cast-in-place concrete lacing or rigid walls in bottom-up construction of traditional soil nailing walls is imperfect and insufficient. In this paper, various laboratory model tests have been carried out to investigate the influence of parameters, including stiffness of the rigid wall to the soil nailing structure with respect to failure mode, displacement patterns and tensile forces at the nail head in several levels of load. Then, the variation of earth pressure distribution on the soil nailing wall, built with a rigid front plate, is sought through different levels of surcharge load and tensile forces at the nail head.

• Journal of Convergence for Information Technology
• /
• v.10 no.3
• /
• pp.7-15
• /
• 2020

As the paradigm shifts from treatment and provider-centered healthcare to prevention and consumer-centered healthcare, the integration of ICT convergence technology is calling for an era of digital healthcare industry revival in the Fourth Industrial Revolution. It is possible to provide individual customized medical services utilizing various medical data, and it is possible to provide various medical services that transcend time and space through integration with other industries. Such digital healthcare includes health, nutrition, exercise, and patient care, while the digital healthcare industry includes healthcare and IT related to medical devices, medical information systems, and healthcare platforms that can provide personal health and medical information. Due to the social demands of the aging and the increase of chronic diseases, digital healthcare is considered as an important policy in the fourth industrial revolution in Korea. In order for the digital healthcare industry to contribute to the prolongation of human life and the improvement of quality of life, it is urgent to develop related infrastructures, legal institutions, and prepare policies. In addition, it is important to activate convergent education to foster talents who will lead the digital healthcare industry. The purpose of this study was to examine the trends of the digital healthcare industry in the era of the fourth industrial revolution and the direction of government R & D policies, and to derive directions and suggestions for future development.

• Journal of Climate Change Research
• /
• v.8 no.4
• /
• pp.305-312
• /
• 2017

We aimed at investigating the difference in $N_2O$ emission factors of chemical and organic fertilizers and identifying the main factors influencing annual fluctuations in $N_2O$ emission. We conducted two-year experiments in 2016 and 2017 in an agricultural field planted with sweet potato (Ipomoea batatas). Treatments included chemical NPK fertilizer (NPK) and chicken compost application at $10\;ton\;ha^{-1}$, $20\;ton\;ha^{-1}$, and $30\;ton\;ha^{-1}$ rates (CK1, CK2 and CK3). Control was also employed with no addition. Results showed that $N_2O$ emission rates were significantly related with soil water status and soil available N contents. Significant correlation between % water filled pore space (WFPS) and $N_2O$ emission was observed only when the %WFPS was greater than 40% and during the initial stage of the experiment (<60 d). Comparison of the emission factors in 2016 and 2017 showed us that the emission factor was greater in 2016 when the %WFPS was maintained higher by 16.5% compared to that in 2017. In 2016, the emission factor of organic fertilizer was higher than that of chemical fertilizer, while in 2017, the pattern was reversed. Annual variability in $N_2O$ emission could also be originated from the available N contents remaining in soil after being taken up by plants. If we apply excessive N fertilizer, the soil would contain excess amount of N which was not uptaken by plants, leading to a huge increase in $N_2O$ emission. This case would overestimate emission factor, which was the case for the organic fertilizer in 2016. Over-fertilization should be avoided when we set up an experiment to determine $N_2O$ emission factor.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.249-256
• /
• 2022

The implant prosthesis of anterior maxilla requires careful consideration in planning. In order to satisfy both esthetic and functional needs of a patient, fusion of intra-oral scan in Cone-beam computed tomography (CBCT) and facial scan can be considered. Bony structures and soft tissues captured in CBCT and occlusal surfaces of intra oral scan were incorporated into personal characteristics from facial scan. The patient had insufficient buccal bone on maxillary anterior area. The maxillary implants could not be placed on the most ideal position. However, the "top down" approach completed by computer-generated arranging of teeth in implant planning and surgery with surgical guide resulted in esthetically and functionally satisfying result regardless of the limitation. Careful diagnosis with digital technique and the usage of surgical guide resulted in successful surgery and esthetic restoration. The temporary fixed prostheses were designed, restored and evaluated. The patient was not satisfied with the first design of temporary prosthesis, which showed uneven space distribution between teeth due to the position of maxillary implant. The design was modified by changing proximal emergence contours and line angle to alter the perceived since of incisors. The patient was satisfied with the new design of provisional restoration. A digital occlusion analyzer (Arcus Digma II, KaVo, Leutkirch, Germany) was used to measure inherent condylar guidance and anterior guidance of a patient to provide a definitive prosthesis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1577-1585
• /
• 2022

As the interest in the 4th industrial revolution and metaverse increases, metaverse with multi edge structure is proposed and noted. Metaverse is a structure that can create digital doctor-like system through a large amount of image processing and data transmission in a multi edge system. Since metaverse application requires calculating performance, which can reconstruct 3-D space, edge hardware's insufficient calculating performance has been a problem. To provide streamable AI software in runtime, image processing, and data transmission, which is edge's loads, needs to be lightweight. Also lightweight at the edge leads to power consumption reduction of the entire metaverse application system. In this paper, we propose collaborative edge-cloud image processing with remote image processing method and Region of Interest (ROI) to overcome edge's power performance and build streamable and runtime executable AI software. The proposed structure was implemented using a PC and an embedded board, and the reduction of time, power, and network communications were verified.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.2
• /
• pp.147-154
• /
• 1999

This study was carried out to obtain reasonable management method of salt-affected soil for ecological restoration in the reclaimed land. Chemical properties of reclaimed soil was investigated base on reclamation years. Ionic acitivity in soil and satruration extract were analyzed to estimate the effect of salt interception by planting ground treatment. The soil porperties of reclaimed land was saline-sodic soil with $11.3dSm^{-1}$ of electrical conductivity, 34.8% of exchangeable sodium percent in first reclamation year. Electrical conductivity, exchangeable sodium and exchangeable chlorine were remarkedly decreased during six years after reclamation but chemical properties of reclaimed soil was unsuitable status for tree growth. Exchangeable sodium perecnt was higher in the neighborhood parks and street tree sites than in the buffer green spaces and was higher in subsoil than in topsoil of profile in all sites. Content of soduim, chloride and sulfate in saturation extract were more than other ions. Content of soduim and chloride were higher in the neighborhood parks and street tree sites than in the buffer green spaces and were higher in subsoil than in topsoil. Content of calcium plus magnesium of soil was higher in the buffer green space than in the neighborhood park and street tree but content of calcium and magnesium in saturation extract were higher, as result from exchangeable sodium, in the neighborhood parks and street tree sites than in the buffer green spaces. Concentration of salt in soil showed the difference with mounding height and planting ground treatment. The lowest concentration of salt appeared in buffer green spaces and street tree sites was the highest. Salt interception by mounding height in the same planting ground treatment was more effective 120cm of mounding height than 70cm of mounding height.

• Korean Journal of Poultry Science
• /
• v.21 no.1
• /
• pp.1-19
• /
• 1994

This study was carried out to investigate the effects of shperical surface of eggs tray and eggshell on breaking strength of eggs for the development of a new egg tray design to prevent eggshell breakage. The results obtained were as follows: 1. According to the results obtained from investigation on the types of 22 egg trays collected from 9 countries(USA, Italy, France, Thailand, Japan, Netherland, Russia, Korea and Swiss), all egg trays except those from Korea were different in their types. 2. According to the determination of breaking strength for 4 pilot egg trays, type B and D were high in breaking strength. Trays B and D which would fit with the spherical surface of egg so that they could increase breaking strength were most recommendable. Breaking strength was not increased even though egg tray was strong. Thickness of eggshell of experimental eggs used in this experiment have no significance (P>0.05). 3. When eggs are packed and transported in egg tray, the breaking strength will depend on how much spherical surface of egg are covered by the spherical surface of the egg tray. Therefore, the inner spherical surface of egg tray must fit to the outer spherical surface of eggs when the egg tray is manufactured. 4. At present, there is only one type of egg tray being used in Korea despite the various egg sizes. In order to minimize the eggshell breakage, however, proper sizes or types of egg trays should be developed for each different categories of the egg size.