• 한국수자원학회논문집
• /
• 제47권7호
• /
• pp.599-614
• /
• 2014

본 연구에서는 삼각형 및 사각형 혼합격자의 적용이 가능하도록 기 개발된 2차원 유한체적모형의 계산속도를 개선하기 위해 모형의 병렬화를 수행하였다. 모형의 병렬화를 위해 코어 수의 제약에 자유로운 MPI 기법을 이용하였고, 프로그램 내의 흐름률 및 계산시간간격의 계산영역에 대해 논블록킹 점대점통신을 이용하였다. 병렬화 된 개발모형의 기존모형에 대한 계산결과의 일치성을 검증하고, 계산시간에 대한 성능향상도와 효율성을 검토하기 위해, $90^{\circ}$의 만곡이 존재하는 L자형 실험하도에 대한 댐 붕괴해석과 자연하천인 Malpasset 댐의 붕괴사상에 대해 모형을 적용하였다. 또한 격자수에 따라 4개의 Case로 구분하여 각각 모의함으로써, 입력규모의 크기에 따른 계산시간의 성능향상도를 함께 검토하였다. 분석결과 병렬화 모형에 의한 모의 결과는 기존모형 및 실측치와 비교하여 만족할 만한 정확도를 확보하였고, 기존모형에 대비해 약 3배 정도의 계산시간에 대한 성능이득을 얻을 수 있었다. 또한 입력자료 규모에 대한 Case별 모의 결과를 통해 적절한 입력자료의 규모와 프로세스 개수를 사용하는 것이 통신부하를 최소화할 수 있는 방안임을 확인할 수 있었다.

• 한국측량학회지
• /
• 제27권5호
• /
• pp.555-563
• /
• 2009

모바일 매핑 시스템 또는 로봇이 GPS (Global Positioning System)와 다중 스테레오 카메라만 탑재 할 경우, V-SLAM(Vision based Simultaneous Localization And Mapping)에 의한 카메라 외부표정과 3차원 데이터를 GIS데이터와 연계 또는 카메라 외부표정의 누적에러를 제거하기 위해 극부 카메라 좌표계에서 GPS (Global Positioning System) 좌표계로 변환이 필요로 한다. 이 요구사항을 만족시키기 위해, 본 논문은 GPS와 V-SLAM에 의한 3쌍의 카메라의 위치를 이용하여 GPS좌표계에서 카메라 자세를 계산하는 새로운 방법을 제안하였다. 제안한 방법은 간단한 4단계로 구성되어 있다; 1)각 3개의 카메라 위치에 기반한 두 평면 법선벡터가 병렬이되도록 하는 사원수 (quaternion)를 계산한다, 2) 계산된 사원수를 통하여 V-SLAM에 의한 3개의 카메라 위치를 변환한다, 3) 변환된 위치에서 두번째 또는 세번째 점이 GPS에 의한 점과 일치하도록 하는 두번째 사원수를 계산한다, 4)두 사원수의 곱을 통하여 최종 사원수 결정한다. 최종 사원수는 극부 카메라 좌표계에서 GPS좌표계로 변환할 수 있다. 추가적으로, 촬영된 물체 위치에서 카메라를 보는 시야각을 기반으로 물체의 3차원좌표 갱신방법을 제안하였다. 본 논문은 제안한 방법을 시뮬레이션과 실험을 통하여 증명하였다.

• 정보처리학회논문지D
• /
• 제14D권3호
• /
• pp.303-310
• /
• 2007

정보시스템 장애는 단순한 소프트웨어 오류에서부터 프로그램 시험 미비, 물리적인 방재시설 미비 등 다양하다. 비록 장애가 사소하더라도 그 결과는 엄청난 피해를 야기 시키기도 한다. 최근에는 이런 문제를 해결하는데 있어 단순한 외부 보안시스템만으로는 어렵게 되었다. 이제는 기업의 전반적인 정보기술에 대해 위험과 관련된 종합적인 대응책 수립과 적절한 대응이 필요한 시점에 도래하였다. 이와 관련하여 본 논문에서는 조직체 내에서 IT자원에 대한 무결성, 가용성, 기밀성을 고려하여 조직 내부와 외부에서 발생할 수 있는 각종 정보 및 시스템과 데이터에 대한 통제는 물론이고 위험에도 대처 할 수 있는 종합적인 위험관리시스템을 모델링하기 위한 특성에 대해 연구하였다.

• 한국CDE학회논문집
• /
• 제15권2호
• /
• pp.94-105
• /
• 2010

Todays, there is fast transition about the new manufacturing IT methodologies from the conceptual phase into the practical application phase for the strengthening of enterprise competitiveness in manufacturing industry. One of those new methodologies is PLM (Product Life-cycle Management). PLM methodology consists of 3D CAD for the product design, PDM (Product Data Management) for the data management based on the collaboration platform and lastly DM (Digital Manufacturing). DM has evoluted from the stand-alone computer simulation of early 1980s, and now it covers the overall production development and production. Unfortunately, there exist serious critical problems about the actual application of DM for the real work. This is owing to the transition of the point of view from stand-alone type application (such as flow simulation or robot simulation) to that of business process about product development and production management. In this paper, we propose an application framework for the successful project with the digital manufacturing methodology with the concept of Information Strategy Planning, which enables the systematic diagnosis and the quantitative evaluation. Also, we introduce the actual practice of the proposing framework with the ISP project for 'Analysis & Simulation Technique of manufacturing process project' that is being conducted by Chungnam Techno Park.

• 한국가구학회지
• /
• 제28권4호
• /
• pp.371-379
• /
• 2017

This study established the scope of the main contents and interpretation of wooden product design using the CNC manufacturing technology as well as the basic concepts of which were defined, accordingly. After coming up with the definition of the CNC wood manufacturing technology from the academic point of view, a design study, using the practical CNC manufacturing technology, was conducted by analyzing and summarizing the contents of each process. In addition, data research and analysis including review on literatures and case studies of existing products were promoted besides design development through application of the design concepts, ergonomics, principle of molding, etc. Ultimately, this study suggested the step-by-step procedure in design drawing, 3D modeling, CAD/CAM data production, CNC manufacturing, and prototype completion together with figures. Through this, the study proposed a standard manufacturing guideline for wood product design using digital manufacturing technology. Base on such efforts, the advantages and points for improvement in product design using CNC manufacturing technology and the future direction of development were forwarded. Meanwhile, a prototype image that was developed through collaborative efforts between the academic circle and field workers was presented to help the case study on the wooden product design technique using CNC.

• 한국직업건강간호학회지
• /
• 제20권2호
• /
• pp.163-171
• /
• 2011

Purpose: This study is to investigate the job stress and presenteeism of nurses with work shift. Methods: The data were collected through questionnaires from 281 clinical nurses working for a university hospital located in D city from 13 to 28 of February, 2009. The data were analyzed by descriptive statistics, t-test, ANOVA, Scheffe verification test, Pearson correlation coefficient and multiple linear regression using SPSS/WIN 16.0. Results: The mean score of job stress was 3.47. Work overload and psychological burden scored the highest point as the sub-category of work stress factor. Work performance loss out of presenteeism showed 26.89 and perceived productivity, 79.79. Also 94.7% of respondents answered they had health problems. A significantly positive correlation was found among job stress, work performance loss and health issue. To determine the factors affecting presenteeism, work performance loss was associated with work overload and perceived productivity with interpersonal relationship conflict. Conclusion: Based on the findings of the study, job stress is positively correlated with work performance loss, and health problems. Therefore, health problems of nurses with work shift need to be considered and plans to manage their job stress affecting presenteeism need to be developed at an earlier stage.

• 한국유체기계학회 논문집
• /
• 제10권4호
• /
• pp.29-38
• /
• 2007

In this study, flow structure in a two-stage centrifugal compressor for a turbo-chiller with the refrigerant, R134a, was numerically investigated at the design point of the compressor using a commercial code. Flow characteristics in the passages of impeller, diffuser and return channel were analyzed in detail including velocity vector, secondary flow, Mach number and pressure contours in blade spanwise and meridional plane for each stage. The estimation on the one-dimensional output from the preliminary design and three-dimensional shape of the impeller blade and the meridional shape of the return channel were performed through the flow analysis, while some numerical schemes and techniques including Multiple Frames of Reference technique, real gas property data and inlet boundary condition changes, which were used in CFD, were compared with their features. The results will be used as reference data for a new design of 3-D impeller shape to improve R134a compressor performance.

• 한국측량학회지
• /
• 제38권5호
• /
• pp.467-476
• /
• 2020

Indoor space has been one of the focal points for geospatial research as various factors such as increasing demands for application and demand for adaptive response in emergencies have arisen. IndoorGML (Indoor Geography Markup Language) has provided a standardized method of representing the topological aspect of micro-scale environments, with its extensive specifications and flexible applicability. However, as more real-world problems and needs demand attention, suggestions to improve this standard, such as representing IndoorPOI (Indoor Points of Interest), have arisen. Hence, existing algorithms and functionalities that we use on perceiving these indoor spaces must also adapt to accommodate said improvements. In this study, we explore how to define spatial neighborhoods in indoor spaces represented by an integrated IndoorGML and IndoorPOI data. We revisit existing approaches to combine the aforementioned datasets and refine previous approaches to perform neighborhood spatial queries in 3D. We implement the proposed algorithm in three use cases using sample datasets representing a real-world structure to demonstrate its effectiveness for performing indoor spatial analysis.

• 방사선산업학회지
• /
• 제17권4호
• /
• pp.359-367
• /
• 2023

In this study, the function and purpose of the disposal cover, which is an engineering barrier installed to isolate the disposal vault of the near-surface disposal facility for radioactive waste from natural/man-made intrusion, and the design details of the demonstration facility for performance verification were described. The Demonstration facility was designed in a partially divided form to secure the efficiency of measurement while being the same as the actual size of the surface disposal facility to be built in the Intermediate & low-level radioactive waste disposal site of the Korea Radioactive Waste Agency (KORAD). The instruments used for measurement consist of a multi-point thermometer, FDR (Frequency Domain Reflectometry) sensor, inclinometer, acoustic sensor, flow meter, and meteorological observer. It is used as input data for the monitoring system. The 3D monitoring system was composed of 5 layers using the e-government standard framework, and was developed based on 4 components: screen, control module, service module, and DBIO(DataBase Input Output) module, and connected them to system operation. The monitoring system can provide real-time information on physical changes in the demonstration facility through the collection, analysis, storage, and visualization processes.

• 대한공간정보학회지
• /
• 제12권3호
• /
• pp.91-97
• /
• 2004

종래에 아날로그 방식의 사진측량에서는 중복된 영상을 도화기를 통해 표정과정을 거쳐 입체모델을 생성하고 이를 바탕으로 도화과정을 수행함으로써 최종도면을 획득하였다. 그러나 이러한 과정을 소형컴퓨터를 통해 일괄처리 함으로써 처리과정의 자동화를 꾀할 수 있으며 입체 모델은 생성하지 않고 해석적인 방법을 통해 3차원 수치자료를 쉽게 획득 할 수 있다. 따라서 본 연구는 수치영상을 이용하여 3차원 위치측정이 가능한 측량시스템을 구축하여 기준점 측량작업 및 촬영조건을 획기적으로 줄임으로써 보다 효율적으로 수치도면을 제작하는데 도움을 주고자 한다. 그 결과 비교적 저가의 디지털 카메라로 사진측량이 이루어지고 컴퓨터만으로도 수치도면을 작성할 수 있다. 따라서 소규모 지역에서는 일반측량보다 경제적으로 수치 도면을 작성할 수 있으므로 시설물 관리를 위한 도면제작 등에 활용 될 수 있을 것이다.