• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.83-91
• /
• 2017

In case of estimation of settlement for the piled-raft foundation, it is necessary to consider interaction among raft, piles and soil. But, simple analytic methods usually are not applicable to considering this complicated interaction. In this study, a computer-based approximate analytic method, HDPR, was developed in consideration of above mentioned interaction in order to analysis of settlement for the piled-raft foundation. The finite element method was applied to raft analysis by means of the Mindlin plate theory, and soil and piles were modeled as springs which were connected with their raft. The linear spring which can consider multi layered soil and the non-linear spring were applied to soil springs and pile springs, respectively. The raft-piles-soil interaction was reflected to each spring. In order to verify the developed analytic method, it was compared and analyzed with 3D FEM analysis, existing approximate analytic method and site monitoring data. As a result, the developed analytic method showed reasonable results of settlement estimations of raft and piles for each case. From a practical point of view, it is confirmed that this analytic method is able to apply for analysis and design of the piled-raft foundation.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.203-210
• /
• 2007

This paper treats optimal route safety assessment system at seaway based on weather forecasting data through INMARSAT. Since early times, captain have been sailing to select the optimum route considering the weather, ship loading status condition and operational scheduling empirically. However, it is rare to find digitalized onboard route support system whereas weather facsimile or wave and swell chart are utilized for the officer, based on captain's experience. In this paper, optimal route safety assessment system which is composed of voyage efficiency and safety component is introduced. Optimum route minimized ETA(estimated time of arrival) and fuel consumption that shipping company. and captain are requiring to evaluate for efficient voyage considering speed loss and power increase based on wave added resistance of ship. In the view point of safety, seakeeping prediction is performed based on 3 dimensional panel method Basically, the weather forecast is assumed to be prepared previously in order to operate this system.

• The Korean Journal of Emergency Medical Services
• /
• v.12 no.1
• /
• pp.27-41
• /
• 2008

Purpose : With increasing number of school accidents, it is crucial to find out necessity of first aid training among school health educator. This study has been conducted to have an clear idea on the demands and necessity for first aid training and what kind of training is most required from school health educator. Method : In this study, questionnaires from 87 school health educator in elementary, middle and high school health educator in the city D were analyzed. The survey was carned out from May 26, 2008 to June 7, 2008 and from the collected data, frequency, independent two samples t-test, paired T-test, one way ANOVA and pearson's correlation were conducted with SPSS 14.0. Result: 1. 51.61 % of nurse-teachers experienced emergency situations and the relations between the necessity they felt from experiencing those situations and demands for first aid training were not statistically meaningful(t=1.87, p= .175). 2. Necessity and demands for the first-aid training were checked with three point scale and there were statistical significance between the two with $2.44{\pm}.47$ and $2.24{\pm}.47$ respectively(t=3.275, p= .000). 3. 86.20%(75 persons) of the respondents have had received first aid training and the training they received were CPR 82.75%(72 persons), primary survey 81.60%(7l persons), contact to 911 79.30%(69 persons) and wounds treatment(lacerated wounds, bum and chilblains) 75.86%( 66 persons) in order. 4. As for the questions that ask on confidence of first-aid treatment, 80% answered they are confident on some limited kinds of treatments, 16% said they are confident and 4% answered they lack confidence. As for the treatment that they can show the highest confidence, wounds treatment topped the list with 93.24%, nose bleeding and removing foreign substance, and stanching followed the list with 82.43% and 81.08% respectively. 5. 97.67% of respondents said they were willing to take training and 89.62% answered to take the training to deal with emergency situations that are taking place in their schools. As for the question that asks for the most wanted treatments, CPR topped the list with 32.18%(28 persons) and treatment for obstruction of airway and shock followed the list with 35.63%(31 persons) and 27.59%(24 persons). Conclusion : Currently, first aid treatment has been centered on CPR, primary survey, contact to 119 and wounds treatment. However, since most of school health educator are fairly confident with wounds treatment, stanching and other first aids, in future training it will be more desirable to focus on CPR and treatment for obstruction of airway and shock that were shown to be most wanted by school health educator.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3C
• /
• pp.143-155
• /
• 2006

SPT-Uphole tomography method was introduced for the evaluation of near subsurface shear wave velocity (Vs) distribution map. In SPT-Uphole method, SPT (Standard Penetration Test) which is common in geotechnical site investigation was used as a source and several surface geophones in line were used as receivers. Vs distribution map which is the triangular shape around the boring point can be developed by tomography inversion. To obtain the exact travel time information of shear wave component, a procedure using the magnitude summation of vertical and horizontal components was used based on the evaluation of particle motion at the surface. It was verified that proposed method could give reliable Vs distribution map through the numerical study using the FEM (Finite Element Method) model. Finally, SPT-Uphole tomography method was performed at the weathered soil site where several boring data with SPT-N values are available, and the feasibility of proposed method was verified in the field.

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.2
• /
• pp.5-16
• /
• 2009

Against the backdrop of the increasing trend towards economic globalisation, many international firms are indicating that decisions on how to enter foreign markets remains one of the key strategic challenges confronting them. Despite the rich body of literature on the topic, the fact that these challenges have continued to dominate global marketing strategy discourses point to someevident lacunae. Accordingly, this paper considers the variables, categorised in terms of firm contexts (standardisation, market research, competition, structure, competitive advantage) and host country-contexts (economic development, cultural differences, regulation and political risk), which influence the degree of involvement of UK companies in overseas markets. Following hypotheses were drawn from literature review: H1: The greater the level of competition, the higher the degree of involvement in the overseas market. H2: The more centralised the firm's organisation structure, the higher the degree of involvement in the overseas market. H3a: The adoption of a low cost-approach to competitive advantage will lead to a higher degree of involvement. H3b: The adoption of an innovation-approach to competitive advantage will lead to a higher degree of involvement. H3c: The adoption of a market research approach to competitive advantages will lead to a higher degree of involvement. H3d: The adoption of a breadth of strategic target-approach to competitive advantage will lead to a lower degree of involvement. H4: The higher the degree of standardisation of the international marketing mix the higher the degree of involvement. H5: The greater the degree of economic development in the host market, the higher the degree of involvement. H6: The greater the cultural differences between home and host countries, the lower the degree of involvement. H7: The greater the difference in regulations between the home country and the host country, the lower the degree of involvement. H8: The higher the political risk in the host country, the lower the degree of involvement. A questionnaire instrument was constructed using, wherever possible, validated measures of the concepts to serve the aims of this study. Following two sets of mailings, 112 usable completed questionnaires were returned. Correlation analysis and multiple regression analysis were used to analyze data. Statistically, the paper suggests that factors relating to the level of competition, competitive advantages and economic development are strong in influencing foreign market involvements. On the other hand, unexpectedly, cultural factors (especially individualism/collectivism and low and high power distance dimensions) proved to have weak moderating effects. The reason for this, in part, is due to the pervading forces of globalisation and the attendant effect on global marketing. This paper has contributed to the general literature in a way that point to two mainimplications. First, with respect to research on national systems, the study may hold out some important lessons especially for developing nations. Most of these nations are known to be actively seeking to understand what it takes to attract foreign direct investment, expand domestic market and move their economies from the margin to the mainstream global economy. Second, it should be realised that competitive conditions remain in constant flux (even in mature industries and mature economies). This implies that a range of home country factors may be as important as host country factors in explaining firms' strategic moves and the degree of foreign market involvement. Further research can consider the impact of the home country environment on foreign market involvement decisions. Such an investigation will potentially provide further perspectives not only on the influence of national origin but also how home country effects are confounded with industry effects.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.12
• /
• pp.431-438
• /
• 2020

In this paper, the method to extract lip contour by multiple threshold is proposed. Spyridonos et. el. proposed a method to extract lip contour. First step is get Q image from transform of RGB into YIQ. Second step is to find lip corner points by change point detection and split Q image into upper and lower part by corner points. The candidate lip contour can be obtained by apply threshold to Q image. From the candidate contour, feature variance is calculated and the contour with maximum variance is adopted as final contour. The feature variance 'D' is based on the absolute difference near the contour points. The conventional method has 3 problems. The first one is related to lip corner point. Calculation of variance depends on much skin pixels and therefore the accuracy decreases and have effect on the split for Q image. Second, there is no analysis for color systems except YIQ. YIQ is a good however, other color systems such as HVS, CIELUV, YCrCb would be considered. Final problem is related to selection of optimal contour. In selection process, they used maximum of average feature variance for the pixels near the contour points. The maximum of variance causes reduction of extracted contour compared to ground contours. To solve the first problem, the proposed method excludes some of skin pixels and got 30% performance increase. For the second problem, HSV, CIELUV, YCrCb coordinate systems are tested and found there is no relation between the conventional method and dependency to color systems. For the final problem, maximum of total sum for the feature variance is adopted rather than the maximum of average feature variance and got 46% performance increase. By combine all the solutions, the proposed method gives 2 times in accuracy and stability than conventional method.

• Journal of Animal Science and Technology
• /
• v.45 no.4
• /
• pp.509-516
• /
• 2003

Growth curves were estimated for 1083 female Korean cattle raised in Daekwanryeong branch, National Livestock Research Institute (NLRI). Comparisons were made among various growth curve models for goodness of fit for the growth of the cows. Estimated growth curve functions were $W_t=370.2e^{-2.208e^{-0.00327t}$ for Gompertz model, for von Bertalanffy model, and $W_t=341.2(1+5.652e^{-0.00524t})^{-1}$ for Logistic model. Ages at inflection estimated from Gompertz model, von Bertalanffy model and Logistic model were 242.2 days, 191.5 days, and 330.5 days respectively, body weight at inflection were 136kg, 115kg, and 170kg, and daily gain at inflection were 0.445kg, 0.451kg, and 0.446kg. The predicted weights by ages from Gompertz model, von Bertalanffy model, and Logistic model were onsistently overestimated at birth weight and underestimated at 36 month weight. The von Bertalanffy model which had a variable point of inflection fit the data best.

• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.635-649
• /
• 2007

Geochemical composition, stable isotopes $({\delta}^{18}O,\;{\delta}D,\;{\delta}^{34}S)$ and noble gases(He, Ne and Ar) of nine hot spring water and three groundwater for five hot springs(Jukam, Hwasun, Dokog, Jirisan, Beunsan) from the Honam area were analyzed to investigate the hydrogeochemical characteristics and the hydrogeochemical evolution of the hot spring waters, and to interpret the source of sulfur, helium and argon dissolved in the hot spring waters. The hot spring waters show low water temperature ranging from 23.0 to $30.5^{\circ}C$ and alkaline characteristics of pH 7.67 to 9.98. Electrical conductivity of hot spring waters is $153{\sim}746{\mu}S/cm$. Groundwaters in this area were characterized by the acidic to neutral pH range$(5.85{\sim}7.21)$, the wide electrical conductivity range $(44{\sim}165{\mu}S/cm)$. The geochemical compositions of hot spring and groundwaters can be divided into three water types: (1) $Na-HCO_3$ water type, (2) Na-Cl water type and (3) $Ca-HCO_3$ water type. The hot spring water of $Ca-HCO_3$ water type in early stage have been evolved through $Ca(Na)-HCO_3$ water type into $Na-HCO_3$ type in final stage. In particular, Jurim alkaline(pH 9.98) hot spring water plotted at the end point of $Na-HCO_3$ type in the Piper diagram is likely to arrive into the final stage in geochemical evolution process. Hydrogen and oxygen isotopic data of the hot spring water samples indicate that the hot spring waters originated from the local meteoric water showing latitude and altitude effects. The ${\delta}^{34}S$ value for sulfate of the hot spring waters varies widely from 0.5 to $25.9%o$. The sulfur source of most hot spring waters in this area is igneous origin. However, The ${\delta}^{34}S$ also indicates the sulfur of JR1 hot water is originated from marine sulfur which might be derived ken ancient seawater sulfates. The $^3He/^4He\;and\;^4He/^{20}Ne$ ratios of the hot spring waters range from $0.0143{\times}10^{-6}\;to\;0.407{\times}10^{-6}\;and\;6.49{\sim}584{\times}10^{-6}$, respectively. The hot spring waters are plotted on the mixing line between air and crustal components. It means that the He gas in the hot spring waters was mainly originated from crustal sources. However, the JR1 hot spring water show a little mixing ratio of the helium gas of mantle source. The $^{40}Ar/^{36}Ar$ ratios of hot spring water are in the range from $292.3{\times}10^{-6}\;to\;304.1{\times}10^{-6}$, implying the atmospheric argon source.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.2
• /
• pp.183-190
• /
• 2015

Objective : Walking with a Material handling is an activity frequently undertaken by agricultural workers in Korea, due to the nature of their work. This study aimed to investigate differences in biomechanical variables according to the mechanical alignment of the lower limbs when walking with a heavy load, and to use this as basic data in the design of various working environments to reduce the skeletomuscular burden on the knee joint. Method : The study subjects comprised of 22 right-foot dominant adult men and women aged between 20 and 23 years. The subjects were divided into a varus or valgus group according to the mechanical alignment of the lower limb by using radiographic findings. The subjects walked without any load and with a load of 10%, 20%, or 30% of their body weight held in front of them. The Kwon3d XP program was used to calculate biomechanical variables. Results : The flexion/extension moment of the knee joint showed a decreasing trend with increased load, irrespective of the mechanical alignment of the lower limb, while the varus group did not show normal compensatory action when supported by one leg at the point of maximum vertical ground reaction force. In addition, in terms of the time taken, subjects showed no difficulties in one-foot support time up to 20%/BW, but at 30%/BW, despite individual differences, there was an increase in single limb. The increased load resulted in a decrease in the ratio of standing phase to ensure physical stability. The valgus group showed a trend of increasing the stability of their center of mass with increasing load, through higher braking power in the early standing phase. Conclusion : In conclusion, although there was no statistical difference in biomechanical variables according to the mechanical alignment of the lower limbs, the varus group showed a more irregular walking pattern with a Material handling than the valgus group, partially proving the association between lower limb alignment and walking with a Material handling.

• Journal of the Korean Home Economics Association
• /
• v.11 no.4
• /
• pp.399-413
• /
• 1973

A Study of the Abilities of House-keeping of Korean Female Students. We tend to have much trouble in doing house-keeping with the lack of practical experience in our daily life in this age of information because we learn more things by vicarious experiences with the help of communication media such as radio, T.V. The purpose of this study is to contribute to the education of house-keeping and teaching of home economics which are essential to female students who will become good house-wives and good members of families. In this thesis, the fundamental items of every day life such as food, costume, and home management were made out in a questionnaire with a view to evaluating the abilities of students' house keeping by these data. A random sample was taken composing of juniors and seniors with the sample size, n = 581, out of the universities and Colleges in Korea ; i.e., Yonsei Univ., Korea Univ., Ewha Univ., Sukmyong Univ., Sung Shim Womans' College (at choon chun), Duk Sung Womans' College, etc. It is to be noted that home economics majors were excluded. The results are as follows 1. Out of the total 25 fundamental items about food the average ability in the case of "I can" is only 11 items, "I have experience" 7 items, and "I have no experience" 7 items. 2. Out of the total 20 fundamental items about costume the average ability, in the case of "I can" is 4 items, and "I have experience" 8 items, and "I have no experience" 8 items. 3. Out of the total 20 fundamental items about home management, the average ability, in the case of "I can" is 5-items. "I have experienc" 8-items, and "I have no experience" 6-items. The following conclusions have been reached on the basis of the above survey : a) On the whole students are poorest at practical house-keeping. b) It is to be pointed our that female students have little experience to participate in practical house keeping every daily life c) Female students are apt to have the self-confidence that they can carry on the house-keeping well. d) One may emphasize the point which tends to be neglected in home-education : each house wife should have the ability of practical house-keeping, mutual under-standing among family members, a sense of responsibility, coorperation and services as a good member of family.