• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.90-95
• /
• 2017

Recently, smaller and lighter products have become of interest in industry applications that increasingly demand thin plate joints of thickness 1.0 mm or less using friction stir welding. In this study, high frequency spindles that run at 3,500-6,500 rpm are introduced for thin friction stir-welded plates. Weldability tests are performed for the butt-joint method of Al5052-H32 alloy of 1.0 mm thickness under 3,500-6,500 rpm spindle revolution with 250-400 mm/min feed speed. An optical microscope was used to analyze the bid structure of the welded zone and stir zone. The tensile-strength and hardness of the welded zone were then measured.

• 방사선산업학회지
• /
• 제5권4호
• /
• pp.313-316
• /
• 2011

[$^{18}F$]FDG (2-[$^{18}F$] Fluoro-2-deoxy-D-Glucose), which is required Automated Synthetic Module for production, is most often used Radiopharmaceuticals in nuclear medicine. In this study, an Automated Synthesis Module was developed to produce FDG in two consecutive time when F-18 feds continuously by modifying a domestic FDG Automated Synthetic Module on structural geometry and control system. The results were showed that the Average Synthesis Yields on the developed Automated Synthetic Module were $45{\pm}3%$ (n=20), $50{\pm}3%$ (n=20) respectively. The Quality Control results, such as Radio TLC, Radiochemical purity, Gamma-counter, pH, LAL Test, Micro bacteria test, showed in same level with domestic [$^{18}F$]FDG Auto-Synthetic modules. Therefore, if some features were improved by considering the components life time and appearance, commercial sales can be expected because of low price and easy maintenance compared with foreign products.

• 대한기계학회논문집A
• /
• 제26권9호
• /
• pp.1736-1745
• /
• 2002

The objective of this study is to predict the roll wear in hot rod rolling process. In this study hot rod rolling process for round and oval passes has been investigated. In order to predict the roll wear, the wear model is reformulated as an incremental form and then wear depth of roll is calculated at each deformation step on contact area using the results of finite element analysis, such as relative sliding velocity and normal pressure at contact area. Archard's wear model was applied to predict the roll wear. To know the thermal softening of DCI (Ductile Cast Iron) roll according to operating conditions, high temperature micro hardness test is executed and a new wear model has been proposed by considering the thermal softening of DCI roll expressed in terms of the main tempering parameter curve. 3D wear program developed in this study might be used for adjusting the gap of rolls to set up a suitable rolling schedule for keeping dimensional tolerance of the product.

• 약학회지
• /
• 제22권4호
• /
• pp.201-206
• /
• 1978

The analysis of elemental sulfur by polarography has already been reported in the literature. Only a discussion of the more important factors influencing the analysis is here presented. (1) The effects of pH on the reduction of elemental sulfur are pronounced and the use of buffered solutions for the analysis of elemental sulfur is necessary. The authors found that a pH of 4-6 was found to be reproducible polarograms by use of D.C. polarograph. However, in alkali solvents the plateau of elemental sulfur has a pronounced dip if the concentration of sulfur is as much as 30ppm. (2) A.C. polarographic method shows a very high sensitivity in the case of sulfur reduction, so that the very low concentration of sulfur can easily be determined (about 1ppm). (3) The characteristics of sulfur wave can be formulated according to Stackelberg-Hauck-Hans equation. It was found that the curve of the peak potential of elemental sulfur in A.C. polarography versus logarithm of sulfur concentration was obtained to be straight line with the slope of 29.6 millivolts. This result was well agreed with theoretical consideration. (4) It was assumed that this polarographical methods were applicable to micro-analysis of elemental sulfur in crude oil and its petrochemical products, precipitated sulfur, and sulfur ointments with accuracy and rapidity.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권11호
• /
• pp.521-527
• /
• 2002

The Hemodialysis system is the device for the patients who have suffered from end stage renal failure as the kidney which removes the waste products in a human body. The existing hemodialysis is based on a 8-bit micro-controller and it is not a touch-screen type but a manual type. This paper is focused on hemodialysis system based on high control and expension embedded system. The whole system consists of main control unit and sub control unit(dialysis control unit, blood control unit, monitoring control unit, networking unit). The dialysis control unit, blood control unit, monitoring control unit are processed by 3 microcontrollers and network unit is for monitoring a renal failure patient's condition. For the evaluation of the system performance, the saline was pured into blood unit and then water removal rate, conductivity and temperature of hemodialysis liquid were measured 10 times in an each state suing the UF pump in the fluid unit varing the quantity of saline to 1000cc, 2000cc, 3000cc and 4000cc. As a result, the rates of water removal are 98.6% in condition of 000cc saline, 96.9% in 2000cc, 98.9% in 3000cc and 98.3% in 4000cc. The conductivities of hemodialysis liquid are 99.6% in the first to third condition and 99.7% in the forth condition. The temperatures of hemodialysis liquid are 99.8% in the first to third condition and 99.6% in th forth condition.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권9호
• /
• pp.1341-1350
• /
• 2009

Dietary lipids are rapidly hydrolysed and biohydrogenated in the rumen resulting in meat and milk characterised by a high content of saturated fatty acids and low polyunsaturated fatty acids (PUFA), which contributes to increases in the risk of diseases including cardiovascular disease and cancer. There has been considerable interest in altering the fatty acid composition of ruminant products with the overall aim of improving the long-term health of consumers. Metabolism of dietary lipids in the rumen (lipolysis and biohydrogenation) is a major critical control point in determining the fatty acid composition of ruminant lipids. Our understanding of the pathways involved and metabolically important intermediates has advanced considerably in recent years. Advances in molecular microbial technology based on 16S rRNA genes have helped to further advance our knowledge of the key organisms responsible for ruminal lipid transformation. Attention has focused on ruminal biohydrogenation of lipids in forages, plant oils and oilseeds, fish oil, marine algae and fat supplements as important dietary strategies which impact on fatty acid composition of ruminant lipids. Forages, such as grass and legumes, are rich in omega-3 PUFA and are a useful natural strategy in improving nutritional value of ruminant products. Specifically this review targets two key areas in relation to forages: i) what is the fate of the lipid-rich plant chloroplast in the rumen and ii) the role of the enzyme polyphenol oxidase in red clover as a natural plant-based protection mechanism of dietary lipids in the rumen. The review also addresses major pathways and micro-organisms involved in lipolysis and biohydrogenation.

• Restorative Dentistry and Endodontics
• /
• 제33권3호
• /
• pp.246-257
• /
• 2008

이 연구의 목적은 3차원 유한요소분석법을 사용하여 교합력의 위치와 방향이 상악 제2소구치의 치경부 복합레진 수복물의 응력분포에 미치는 영향에 대해 평가해 보고자 하였다. 발치된 상악 제2소구치를 이용하여 micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium)로 스캔한 후 HyperMesh Ver 6.0 (Altair Engineering, Inc., Troy, USA)와 3D-DOCTOR (Able Software Co., Lexington, MA, USA)로 3차원 유한요소 모형을 제작하였다. 제작된 소구치 모형에 쐐기형 와동을 형성하고 탄성계수가 서로 다른 혼합형 복합레진과 흐름성 복합레진으로 각각 수복하였다. 수복 후 설측교두의 협측사면 세 위치에 각각 수직, 20도, 40도의 각도로 하중을 가한 후 응력분포를 ANSYS Ver. 9.0 (Swanson Analysis Systems. Inc., Houston, USA) 프로그램을 이용하여 인장 응력의 분포를 분석한 바 하중 위치와 관계없이 하중방향의 각도가 증가할수록, 또한 수복재료의 탄성계수가 높을수록 인장응력도 증가하는 것으로 보아 교합력의 방향과 수복재료의 탄성계수가 치경부 수복물의 응력분포에 중요한 영향을 미치는 요소로 사료된다.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2008년도 Spring Scientific Meeting(the 129th) of Korean Academy if Conservative Dentistry
• /
• pp.246-257
• /
• 2008

이 연구의 목적은 3차원 유한요소분석법을 사용하여 교합력의 위치와 방향이 상악 제2소구치의 치경부 복합레진 수복물의 응력분포에 미치는 영향에 대해 평가해 보고자 하였다. 발치된 상악 제2소구치를 이용하여 micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium)로 스캔한 후 HyperMesh Ver 6.0 (Altair Engineering, Inc., Troy, USA)와 3D-DOCTOR (Able Software Co., Lexington, MA, USA)로 3차원 유한요소 모형을 제작하였다. 제작된 소구치 모형에 쐐기형 와동을 형성하고 탄성계수가 서로 다른 혼합형 복합레진과 흐름성 복합레진으로 각각 수복하였다. 수복 후 설측교두의 협측사면 세 위치에 각각 수직, 20도, 40도의 각도로 하중을 가한 후 응력분포를 ANSYS Ver 9.0 (Swanson Analysis Systems. Inc., Houston, USA) 프로그램을 이용하여 인장 응력의 분포를 분석한 바 하중 위치와 관계없이 하중방향의 각도가 증가할수록, 또한 수복재료의 탄성 계수가 높을수록 인장응력도 증가하는 것으로 보아 교합력의 방향과 수복재료의 탄성계수가 치경부 수복물의 응력분포에 중요한 영향을 미치는 요소로 사료된다.

• 한국식품영양과학회지
• /
• 제41권12호
• /
• pp.1758-1763
• /
• 2012

본 연구의 목적은 곰취(Ligularia fischeri)와 한대리곰취(Ligularia fischeri var. spicifoprmis) 정유의 향취 및 화학성분을 비교하는데 있다. 곰취와 한대리곰취의 정유 함량은 각각 0.12%와 0.04%였으며, 역치수준은 각각 0.01%와 0.1%였다. 향수개발전문가에 의해 평가된 곰취 정유의 향취는 citrus, coniferous, green, oily, smoky, wet하였던 반면 한대리곰취 정유의 향취는 balsam, earthy, oily, wet하여 매우 상이하였다. 곰취 정유에는 총 19종의 화학성분이 검출되었는데 탄화수소가 14종(75%), 알코올이 4종(20%), 아세테이트가 1종(5%)이었으며, 주된 화학성분은 L-${\beta}$-pinene(36.02%), D-limonene(25.64%), ${\alpha}$-pinene(24.85%), ${\beta}$-phellandrene(5.39%), 3-carene(3.77%), ${\alpha}$-phellandrene(2.05%)이었다. 한대리곰취 정유에는 총 25종의 화학성분이 검출되었는데 탄화수소 17종(68%), 알코올 4종(16%), 아세테이트 3종(12%), 질소화합물 1종(4%)이었으며, 주된 화학성분은 D-limonene(39.80%), L-${\beta}$-pinene(35.43%) ${\alpha}$-pinene(11.94%), 3-carene(3.70%), ${\beta}$-cubebene(3.51%), ${\beta}$-phellandrene(2.38%)이었다. 한대리곰취 정유에서는 ${\rho}$-cymene, ${\gamma}$-muurolene, ${\gamma}$-cadinene, germacrene D, ingol 12-acetate, butyl 9,12,15-octadecatriene과 nimorazole이 미량 검출되었으나, 곰취 정유에서는 이러한 화학성분들이 검출되지 않았다. 본 연구의 결과 각각 독특한 향취를 갖는 곰취와 한대리곰취 정유는 향장산업제품 개발을 위한 소재로 활용될 수 있을 것이라 판단된다.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.1-33
• /
• 1997

The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.