• 한국도서관정보학회지
• /
• 제53권1호
• /
• pp.171-190
• /
• 2022

이 연구의 목적은 도서관학 5법칙을 통하여 초등학교 도서관 운영의 현황을 살펴보고 그 개선방안을 제시하는 것이다. 이를 위해 연구의 범위를 부산지역으로 하여 초등학교 도서관 304곳의 운영 현황을 분석하였고, 심층조사를 위하여 부산의 D초등학교 도서관을 사례로 살펴보았다. 부산지역 초등학교 도서관의 운영 현황은 2016~2021년 동안의 도서관 보유, 사서교사 배치, 장서, 연간 이용, 예산, 좌석 등으로 구분하여 분석하였다. 분석 결과, 특히 정규직 사서교사 배치율이 10.5%에 불과해 인력 부족 문제가 심각함이 드러났다. 사례연구에서는 랑가나단의 도서관학 5법칙 중 제1법칙과 제3법칙을 중심으로 부산 D초등학교 도서관 운영 현황을 조사하였다. 제1법칙에서는 열람방식, 입지, 이용시간, 가구, 직원의 측면으로 나누어 조사하였고, 제3법칙에서는 서가배열, 목록, 확장봉사, 도서선택 측면으로 나누어 조사하였다. 특히 한 학기 한 권 읽기용 도서로 50권 이상 복본이 있는 도서가 전체 장서의 4.8%를 차지하여 불균형한 장서 구성의 문제를 보였다. 연구의 결과, 개선방안으로 '사서교사 배치 확대', '리모델링을 통한 독서환경 구축', '균형 잡힌 장서개발'을 제시하였다.

• 한국강구조학회 논문집
• /
• 제22권1호
• /
• pp.99-108
• /
• 2010

본 연구는 구조상세설계와 모델링 단계에서 활용 가능한 철골 접합부 모델링 자동화 모듈의 개발을 목적으로 한다. 이를 위해 접합부의 구조해석 결과를 3D 모델링의 입력 변수와 표준접합상세지침을 고려하여 라이브러리 D/B로 구축하였다. 구축된 라이브러리 D/B를 접합부 3D 모델링 단계에서 활용하기 위하여 상용 S/W에서 제공하는 OpenAPI 함수를 이용하여 접합부 자동 생성 모듈을 개발하였다. 개발된 모듈을 검증하기 위해 6층 규모의 철골 오피스 구조물을 대상으로 접합부 모델링을 수행하였으며, 접합부 모델링 과정에 대해 기존 프로세스와 연구 프로세스의 비교를 통해 적용성과 효율성을 검증하였다.

• 미생물학회지
• /
• 제30권1호
• /
• pp.30-36
• /
• 1992

물오리나무의 뿌리혹에서 분기한 Frankia sp. SNU 014201 공생균주의 게놈내에 13.5 kb의 EcoRI, 18.0 kb 의 BamHI, 10.5 kb의 Bg/II, 4.5 kb의 KpnI 절편에 nif-H, D 유전자가 존재함을 확인하였다. 람다 파아지 EMBI3-BamHI arm을 사용하여 제조한 genomic library 에서 nif유전자를 포함하고 있는 14개의 재조합 파아지 클론을 선별하였다. 이들 중 Ahnif-12번 클론은 nif 유전자를 포함하고 있는 18kb 의 삽입 DNA 를 가지고 있었으며, 이중 7.9 kb 의 BamHI 절편내에 nif-H. D. K가 3.6kb 의 HindIII/KpnI 절편내에 nif D 의 일부와 H 가 위치하고 있었다. 따라서 이등 절편을 각각 subcloning 하고 제한효소 지도를 작성한 결과, Frankia sp. SNU 01420의 nif-H. D. K 유전자는 6.5 kb 의 Hind III/Bam HI 절편과 5.2 kb Sal/IBamHI 절편내에 연속 배열하고 있다.

• 한국문헌정보학회지
• /
• 제16권
• /
• pp.281-327
• /
• 1989

This dissertation is presented in two major parts. The first part presented in Chapter 3 attempts to verify the major hypothesis of the present study that the research and development laboratories(hereafter referred to R&D laboratories), establishd withine industrial firms to develop new technologies needed for their own industrial activities, may have another but very important functions to bring information on the externally generated technologies to attention of their respective management decision makers, eventually resulting in the transfer of technology; and such information functions of the R&D laboratories may be better performed by well-organised laboratories than by poorly-organised ones. The second part presented in Chapters 4, 5, 6 and 7 discusses, after the preceding hypotheses has been verified, some desirable situations of the R&D laboratories in facilitating the flow of information on new technologies developed in the world into their industrial firms, centering on the organisational positions and the major fields of interest of the person in charge of the R&D centers, services of the library and technological information office supporting the R&D laboratories, and frequencies of direct contacts of research and development workers with experts in the world and of participation in various conferences, seminars, workshops, exhibitions, etc. Now that there is no recognised instrument and method available for direct measurement of volume of technological information transfered into a particular industrial firm, the number of technologies introduced into a given firm is employed in the present study as an analogous parametre indicating volume of technological information transfered into the firm during a particular period of time. A logical attempt to justify the use of the indirect paramentre is made in Chapter two. vidences needed to verify the hypotheses of the present study are collected through the various publications of the Korea Industrial Research Institutes and other agencies and institutions related to industrial research activities, and through responses to the questionnaire posted to a sample of the 66 R&D laboratories on 6 May 1987 and returned by 30 August of the same year. Some findings and conclusions made in the study are summarised as follows: (1) More information on externally developed technologies flows into the industrial firm with a R&D laboratory of its own than into the industrial firm without one, and naturally, more chances of transfer of technologies are given to the former than to the latter (see 3. 2) (2) After establishing an R&D laboratory, more technological information flows into the industrial firm than before establishing one (see 3. 3) (3) More technological information flows into the industrial firm with a well-organised R&D laboraory than into the firm with a poorly-organised one (see 3. 4) (4) More technological information flows into the ndustrial firm where the director of its R&D laboratory has status qualified to participate in the highest managerial decision making processes of the firm than into the industrial firm where the director does not have such status (see 4. 2) (5) More technological information flows into the industrial firm where the director of R&D laboratory does not hold other positions within the firm than into the industrial firm where the director holds other positions (see 4.3) (6) There is evidence showing that quantities of technological information transfered into industriali firms vary with the case that the major background of the director of the R&D laboratory is the same as the main field of R&D activities of his or her laboratery, the case that the director's background is partly related to the field of R&D activities of the laboratory, and the case that the director's major background is different from the field of R&D activities of the laboratory (see 4.4) (7) More technological information flows into the industrial firm with the director of its R&D laboratory appointed from among professional research and development workers than into the industrial firm with the director of its R&D laboratory appointed from among general managers (see 4.5) (8) More technological information flows into the industrial firm with its R&D laboratory which has established a library service unit within its own jurisdiction than into the industrial firm with its R&D laboratory which has established a library service unit within its own jurisdiction than into the industrial firm with its R&D laboratory which uses a library within the firm but outside the laboratory (see 5. 1) (9) More echnological information flows into the industrial firm with a technological information office of its own than into the industrial firm without such an office (see 5. 2) (10) More technological information flows into the industrial firm with a large research and development staff in its R&D laboratory than into the industrial firm with a small staff in its R&D laboratory (see 5. 2) (11) More technological information flows into the industrial firm with its R&D laboratory whose staff members more frequently contact experts in the conferences, seminars, symposiums, and workshops held in foreign countries and novelties in the world's major exhibitions than into the industrial firm with its R&D laboratory whose staff members less frequently contact such experts and novelties (see 6. 2 ; 6. 3)

• 한국도서관정보학회지
• /
• 제26권
• /
• pp.23-56
• /
• 1997

The purpose of this study is put emphasis on the importance of the library statistics. e. g., more than ten related current library statistics were inaccurated each other, so whole of statistic figures is not to be trusted. This research is make an attempt to more accurate information about library situations. Especially, with special reference to basic library statistics in the [Bulletin of National & College University libraries](Vol. 1-14, 1983-96, published by Council on National College & University Libraries), take the 24 major factors to compare and evaluate with 46 national and public university libraries. Analyzing 24 factors including 5 subjects. These subjects are as follows: 1) Total numbers of staffs with faculty members and students enrollment 2) Whole library collection of monographs and serial and publishcations. 3) Annual university budgets and library material expenditures. 4) Library facilities and building square measure. 5) Library service situation with circulation, inter-library loan/borrow and monograph D/B build up.

• 한국산학기술학회논문지
• /
• 제17권4호
• /
• pp.129-137
• /
• 2016

국내외에서 건축시설 중심의 BIM 라이브러리를 개발하여 보급하고 있으나, 개별 라이브러리 형상에 대한 물리적, 논리적 품질검토 방법을 정의하고 있지 않아 2D로부터 변환된 3D 라이브러리 모델의 신뢰성을 확보하는데 어려움이 있다. BIM 라이브러리는 자재 및 부재 제작업체들이 참여하여 컨텐츠를 구성하므로 개별 라이브러리의 제작 후 납품시 별도의 품질검토를 통해 인증을 받는 절차가 무엇보다 중요하다. 또한 그 활용에 범용성을 가져야 하므로 일관된 검토기준에 따라 객체의 품질을 확보하는 것이 필요하다. 따라서 본 연구에서는 국토교통부 표준도를 기반으로 작성된 토목분야 BIM 라이브러리를 토대로 기존 2D와 비교하여 물리적 및 데이터 관점에서 정확한 라이브러리 객체가 작성되었는지를 확인하기 위한 품질 검토 방법을 구성한다. 본 연구는 건축 및 토목분야의 자재 및 부재 제작업체들이 BIM 라이브러리 객체 납품 시 품질 검토 방법으로 널리 활용될 수 있을 것이다. 또한 As-Built BIM 모델의 품질검토를 위한 룰-셋(Rule-Sets) 정보로 활용되어 파라미터 기반의 자동화된 품질검증 시스템 구축에 활용될 수 있을 것이다.

• 한국CDE학회논문집
• /
• 제4권2호
• /
• pp.87-99
• /
• 1999

We developed a Part Information Brokering System, namely PIBS, that can inter-link part suppliers and buyers using WWW(World Wide Web). The major contribution of this paper is that the system provides a 3D collaboration environment that enables multiple users to share the same workspace where they cooperatively manipulate part features in real time. PIBS carries out two major functions: one to maintain part data in a part library, and the other to provide the means for the clients to cooperate. An object-oriented database is used for the part library which stores apart information registered by part suppliers. VRML(Virtual Reality Modeling Language) the ISO standard for 3D visualization on WWW, is used to represent 3D part models. Several Java programs have been implemented to support synchronous and a synchronous communication of the 3D models. Once the users are interconnected through the system, a user's manipulation of part objects is transparently and instantaneously transmitted to the others. This means that all the participants can are the same view and movement of the 3D part models. Since the system is developed using a Java applet-server architecture, it requires no additional software other than standard web browser. The prototype system has been successfully implemented, and demonstrated its applicability to virtual 3D part information sharing.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2670-2689
• /
• 2022

STREAM - a lattice transport calculation code with method of characteristics for the purpose of light water reactor analysis - has been developed by the Computational Reactor Physics and Experiment laboratory (CORE) of the Ulsan National Institute of Science and Technology (UNIST). Recently, efforts have been taken to develop a photon module in STREAM to assess photon heating and the influence of gamma photon transport on power distributions, as only neutron transport was considered in previous STREAM versions. A multi-group photon library is produced for STREAM based on the ENDF/B-VII.1 library with the use of the library-processing code NJOY. The developed photon solver for the computation of 2D and 3D distributions of photon flux and energy deposition is based on the method of characteristics like the neutron solver. The photon library and photon module produced and implemented for STREAM are verified on VERA pin and assembly problems by comparison with the Monte Carlo code MCS - also developed at UNIST. A short analysis of the impact of photon transport during depletion and thermal hydraulics feedback is presented for a 2D core also from the VERA benchmark.

• 한국CDE학회논문집
• /
• 제20권4호
• /
• pp.431-442
• /
• 2015

Currently, a BIM-based quantity takeoff (QTO) system is mainly focused on architectural projects. To perform this, diverse quantity takeoff methods such as an object-based automatic quantity takeoff, manual quantity and base functions of calculation have widely been utilizing. However, since BIM library for road projects includes structural elements associated with alignment, it is necessary to establish cost estimation system interlocked with historical cost using 3D library by each unit length. Accordingly, the aim of this study is to develop cost estimation model with using a historical cost approach so that it can be utilized in construction planning based on the BIM library for road projects. For this, based on the BIM library for road, the standardized quantity is estimated, and a process for calculating historical cost and a verification model with a 5D simulation was developed by mapping a WBS code with each BIM library object. This can be applied during the approximate cost estimation process in a project planning and an initial design phase for road projects. Besides, it is expected that these results will be utilized in constructing an optimal historical cost estimation process for project libraries.

• Journal of information and communication convergence engineering
• /
• 제2권3호
• /
• pp.172-176
• /
• 2004

In special effects industry there is a high demand to convincingly mimic the appearance and behavior of natural phenomena such as smoke, waterfall, rain, and fire. Particle systems are methods adequate for modeling fuzzy objects of natural phenomena. This paper presents particle system graphics library for generating special effects in video games and virtual reality applications. The library is a set of functions that allow c++ programs to simulate the dynamics of particles for special effects in interactive and non-interactive graphics applications, not for scientific simulation.