• Journal of the Korean Society of Safety
• /
• v.37 no.4
• /
• pp.92-100
• /
• 2022

Of the Korean military's 3,959 ammunition depots, 1,007 - more than 25% - violate safety requirements for distance and equipment. There is a risk of explosion in old depots that are vulnerable to various interior and exterior accidents. This paper examines 10 scenarios, with varying values for ammunition amount and safety distance. The study calculated the overpressure that can be applied to risk-exposure objects, based on the safety distance; expected damage was predicted using constructed spatial information from 3D explosion simulations. The simulations confirmed that explosion overpressure increased the most when the safety distance violation rate increased from 80% to 90%. It also confirmed that secondary damage such as fire and explosion can cause casualties and property damage when the violation rate is 60% or higher. The results show that building collapse becomes a risk with a violation rate of 70% or higher. We conclude that taking ammunition depot safety distance violation into account when planning military facilities and their land utilization could better protect life and property.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.457-463
• /
• 2009

The earthwork is essential procedure for all civil engineering projects. Because of its importance in terms of cost and time, it should be managed effectively. In light of this, The Intelligent Excavating System (IES) research consortium has established to improve the productivity, quality and safety of current excavating/earthwork system by the Ministry of Land, Transportation and Maritime Affairs (MLTM) of Korea. This paper summarizes ongoing research aimed at development knowledge and presents a framework of task planning and visualization system for IES. The task planning and visualization system consists of three functions. 1) Using digital terrain model which created by 3D laser scanner, the system can divide it and generates global/local work area so that the excavator can work through the area. 2) In order to operate and/or control the excavator, the system exports the location, paths of boom, arm and bucket data of the excavator to control center. 3) The task planning system is visualized on the computer programming aided-graphic interface which simulates the planned work processes and eventually assists the operator for the control of the excavator. The case study which we have performed, demonstrates the effectiveness of the proposed system.

• Journal of Environmental Science International
• /
• v.16 no.5
• /
• pp.571-581
• /
• 2007

The mechanism of water pollution in Lake Shihwa, one of highly eutrophicated artificial lakes in Korea, has been studied using a numerical 3D physical-biochemical coupled model. In this study, the model was applied to estimate the contribution of land-based pollutant load to water quality of heavily polluted Lake Shihwa. The chemical oxygen demand(COD) was adopted as an index of the lake water quality, and the spatial distribution of an average COD concentration during the summer from 1999 to 2000 was simulated by the model. The simulated COD showed a good agreement with the observed data. According to reproducibility of COD, the high-est levels between 8 and 9 mg/L were shown at the inner site of the lake with inflow of many rivers and ditches, while the lowest was found to be about 5 mg/L at the southwestern site near to dike gate. In the pre-diction of water quality of Lake Shihwa, COD showed still higher levels than 3 mg/L in case of reduction of 95% for land-based pollutant load. This suggests that the curtailment of land-based pollutant load is not only sufficient but the improvement of sediment quality or the increase of seawater exchange should be considered together to improve a water quality in Lake Shihwa.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.3
• /
• pp.232-238
• /
• 1998

To analyse the management and production of medicinal crops in Uisong region, cultural conditions and standard income of 147 farms were investigated. Location quotient of medicinal crops cultivated was high as following order ; Paeonia lactiflora > Cornus ofidnalis> Bupleurm falcatum > Anemarhena asphodeloides > Rehmannia glutinosa > Eucommia ulmoides > Paeonia suffruticosa > Angelica dahurica. The average cultivated area per farm was 1.92ha : 1.35ha of upland field, 0.56ha of paddy field. Distribution of agricultural land in each farm was average 10.2 fields in 3.1 locations. Ratio of labor input in the medicinal plant sector was 31.1 %. The number of medicinal crops cultivated was 36 species among 147 farms and 2.4 species per farm. Among the cultivated medicinal plant, peony (Paeonia lactiflora) was the most popular medicinal plant, which was cultivated in 30.72ha of 85 farms. Income from medicinal plants was high in order of Carthamus tinctorius, Polygonatum stenophyllum, Angelica genuilexa. Medicinal crops should be selected based on farm condition, risk level and price settlement in order to maximize productivity and income.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.2 s.20
• /
• pp.39-47
• /
• 2002

For the purpose of data construction for the systematic management and sight-seeing guidance of the natural park, the Kumoh Mt. Province Park was selected as a pilot area. Digital topographic maps, thematic maps and satellite imagery covering the object area were processed and then landform analysis for elevation, slope, aspect and so on was conducted through DEM generation, and the landcover map and NDVI maP were extracted from Landsat TM data. The database was then constructed with these spatial data for GSIS. The image map was generated from IKONOS satellite data, which cover the pilot area data, with one meter resolution and also 3D visualization which was overlaid with main paths up a mountain were conducted. And the moving image files were produced along main paths up including main natural spectacular sights, cultural assets and management facilities. It is expected that the research result can be utilized as the fundamental data for re-assessing suitable land use and constructing Web-based guidance system.

• Journal of Chest Surgery
• /
• v.43 no.6
• /
• pp.663-668
• /
• 2010

Background: Spontaneous pneumomediastinum is an uncommon disorder with few cases reported. It usually occurs in young males and has benign self-limiting course without any apparent concomitant factor. It is seen after intrathoracic pressure changes leading to alveolar rupture. The clinical experiences of two medical centers were reviewed to aid in optimal management. Material and Method: Retrospective review between March 2003 and August 2010 with spontaneous pneumomediastinum patients was performed. Result: 24 patients were identified with a diagnosis of spontaneous pneumomediastinum. These 24 patients were comprised of 18 men and 6 women with mean age 18.9 years (range 10 ~ 33). The major initial complaints were chest pain (79.2%), throat pain (62.5%), and subcutaneous emphysema (41.7%). The triggering events were exercise (16.7%), coughing (12.5%) and vomiting (12.5%). No apparent triggering event was noted in 54.2% of patients. In all cases, chest radiograph and computed tomography was done. Diagnostic computed tomography was required in 25%. White blood cell counts and C-reactive protein (CRP) were checked, and their initial mean values were $9,790{\pm}3,240/{\mu}L$ Land $1.31{\pm}1.71mg/dL$, final mean values were $5,440{\pm}1,665/{\mu}L$ Land $0.72{\pm}0.73mg/dL$, respectively. 23 patients were admitted (average $5.0{\pm}1.8$) and the symptoms were self-limiting in all cases without complications. Conclusion: Spontaneous pneumomediastinum is a benign condition with mild inflammatory signs that often presents with chest or throat pain. Secondary causes must be ruled out to avoid an unfavorable outcome with less invasive study. Because of very rare complications and recurrence, outpatient basis and shortened hospitalization may be feasible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.155-160
• /
• 2018

The unmanned aerial vehicle (UAV) is used in various fields, such as land surveying, facility management, and disaster monitoring and restoration because it has low operational costs, fast data acquisition, and can generate a digital surface model (DSM). Recently, the UAV has been applied to process management in construction projects. Construction projects are widely distributed not only in urban areas but also in mountainous areas and rural areas where people are rarely in traffic or in vehicles. Projects range from a few hundred meters to several kilometers long. In order to perform a reconnaissance survey, a surveying method using a global positioning system (GPS) or a total station has mainly been used. However, these methods have a disadvantage in that a lot of time is required for data acquisition. This study's purpose is to evaluate the usability of a UAV DSM for surveying a construction area. Data was acquired using the UAV and a three-dimensional (3D) laser scanner, and the DSM of the construction site was created through data processing. The UAV DSM showed accuracy to within 30 cm based on the 3D laser scanner data, and a process comparison between the two work methods was able to present the usability of the UAV DSM in the field of construction surveying. Future utilization of the UAV DSM is expected to greatly improve the efficiency of work in construction projects.

• Korean Journal of Weed Science
• /
• v.4 no.2
• /
• pp.135-142
• /
• 1984

To obtain the basic information for weed management in polder land, a colligated assessment on weed distribution and it`s plant sociological indices on Gyewha polder land were arranged. At the situation of assessment, the Gyewha polder land was reclaimed with aim with paddy-rice production. As a result of reclamation, the salinity of most soil samples were below 0.3%, and acidity ranged from pH 5.5 to 6.5. Total weed species were counted as much as 17 species (3 gramineae, 7 cyperucese, and 8 broad-leaved species), and a most dominant species, Scirpus maritimus, were succeeded with Monochoria v., Eleocharis a., and Cyperus d., etc. by reclamation. Declining of soil salinity and soil pH, the number of weed species, individuals, biomass, species diversity, evenness, sociability index were increased, but the population particularity was weaken in tendencies. By developing of reclamation, the weed species which is summer annual broad leaf, wind and water disseminating, and tussock formed species are increased instead of salt-resistant, perennial cyperus, and rhizomatous extending species.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.630-647
• /
• 2021

We determined the current problem of the restoration deposit-estimation system, stipulated by the Mountainous Districts Management Act, using the Delphi technique. Consequently, we proposed a standard model for forest land restoration to derive a reasonable deposit-estimation system. With the result of the Delphi survey, the inappropriateness of land-use type and slope gradient classifications was shown; the insufficiency of standard works was a significant problem in the current system. A way to solve these problems was devised, to reorganize the current land-use type into the subject of the site. The specific subjects included the following: (i) to permit or report forest land-use change and temporary use of forest land, (ii) to report temporary use of forest land, (iii) to permit stone collection or sale for mineral mining, and (iv) to allow sediment collection. The current slope gradient subdivision into (a) θ<10°, (b) 10°≦θ<15°, (c) 15°≦θ<20°, (d) 20°≦θ<25°, (e) 25°≦θ<30°, and (f) θ≧30° and the reorganization of 17 standard works into 22 standard works were deemed as solutions, along with seven additional works. We developed 24 standard models for the forest land restoration project based on the aforementioned results. The deposits estimated by these models ranged from 34,185,000 (Korean) won to 607,403,000 won. If additional works, premiums, discounts, and supervision fees are added to the models, the deposit increases to an estimated 668,143,000 won subject to permission for stone collection or sale and mineral mining. Experts agree on the distribution of the restoration deposits estimated by these models at a high level in the Delphi survey. Our findings are expected to contribute to securing the appropriateness of the restoration cost deposited for the smooth performance of the vicariously executed restoration project.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.149-152
• /
• 1998

Nowadays, GIS, as multi-discipline information system, is closely linked with GPS application in conjunction with GIS-T or Logistics GIS. With this R&D trend. CPS/GIS application system for AVL is newly developed in this study. This AVL is designed and implemented by using pure Java computing technology towards com ing Car-equipped wireless Internet PC age, and main features of Java are included at this system: Platform independence, Multi-thread processing, and Object-oriented paradigm. While, because core modules of this AVL are based on GIS spatial engine, unlike other commercial AVLs, large spatial database problem handling digital image/spatial information and attribute information and direct access problem of GIS data is easily dealt with. this system can directly access external database by using JDBC: MS Access for desktop version and Oracle for W/S version. Finally, it is thought that Java-based AVL, one of CPS/CIS applications, can be easily extended into other prospective GIS applications: Land surveyor supporting system, Flight tracking system, 3D facility management system with CPS, and so forth.