• Journal of Mushroom
• /
• v.20 no.3
• /
• pp.127-137
• /
• 2022

Effects of substrate bed interior environments on mushroom qualities were investigated in oyster mushroom cultivation facilities in which either Reversible Air-Circulation Fans (RACF) blowing air in two directions (upwards and downwards) or customary Convection Fans (CF) with air blowing only upwards were operated throughout the cultivation period. Two days before harvest, the deviation ranges of the bed interior temperature and relative humidity in the facility using RACF were in the ranges of 1.0-1.3℃ and 7.8-9.0% in the first growing cycle, and within 0.7-1.1℃ and 10.0-11.4% in the second cycle. In the facility using CF, the ranges of variation in the indoor environment parameters (5.8-6.4℃ and 21.3-23.1% in the first growing cycle, and 3.4-5.7℃ and 14.6-18.3% in the second growing cycle) were much enlarged compared to those associated with RACF. These results strongly indicate that RACF significantly enhances air uniformity. Some mushroom qualities differed between growing cycles. For instance RACF in the first cycle gave somewhat better qualities than CF, but some qualities, like pileus diameter and stipe length, were slightly lower than those described for CF in the second cycle when the cultivation substrate weakened. The observation that some qualities worsened under RACF conditions, despite better air uniformity during the growing cycle, revealed the possibility that downward wind may exert a non-negligible negative effect on mushroom growth. Therefore in the future, making wind measurements on the interior and exterior of substrate beds is necessary to obtain insights into their influences on mushroom qualities. The RACF operation manual needs to be edited to convey this necessity.

• Culinary science and hospitality research
• /
• v.20 no.3
• /
• pp.171-185
• /
• 2014

This research investigates the causal relationships between the selection attributes of coffee shops and customer value and revisit intention. To do this, the statistics programs SPSS 18.0 and AMOS 18.0 were used targeting 218 college students from three universities (K, D, Y) in the Busan area. Frequency analysis, explanatory factor analysis, confirmatory factor analysis, correlation analysis, and structure model analysis for hypothesis verification were conducted to analyze the data. Based on the results of exploratory factor analysis, five factors were drawn as quality of coffee, indoor environment, service, discount, and brand. Model fidelity and validity was confirmed by implementing the confirmatory factor analysis. In addition, results of structure model analysis confirmed partial relationships among the selection attributes of the college students regarding coffee shops, customer value, and revisit intention. Furthermore, a positive relationship between customer value and revisit intention was also confirmed. Thus, this research suggests that coffee shop managers should manage in a way that customers may acknowledge the value of the expenses they pay.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.91-97
• /
• 2018

This paper presents implementation possibilities of digital IoT doorlock systems via VLC(Visible Light Communication)'s color grid. The color grid-based VLC modulation scheme which are discussed in this paper utilize the straightness of light and abundant frequency resources which are the properties of the light. Performance results in this paper are compared to that of conventional modulations with Bit Error Rate (BER) and Signal to Noise Ratio (SNR) simulations. With respect to a channel model, the proposed modulation schemes select the nearest Line Of Sight (LOS) except Non Line Of Sight (NLOS). Experiments in this paper show error rates of received symbols by changing power dB at a distance of 3m between Tx and Rx in an indoor environment. Through performance results and experiments, this paper demonstrates superiority of the proposed color grid-based modulation schemes.

• Journal of Korean Society on Water Environment
• /
• v.23 no.2
• /
• pp.193-200
• /
• 2007

The AOPs research defined by creating a sufficient amount of OH radicals from the dissolution of organic materials through photoxidation and research for a complete elimination of residual organic materials by membrane are actively ongoing. This research focuses on the hybrid processing of AOPs and M/F membrane to dissolve and eliminate organic chemicals in drinking water which are suspected of carcinogens. For this purpose, underground water was used as a source of drinking water for the hybrid processing of AOPs oxidation and M/F membrane, and a pilot plant test device was installed indoor. Carcinogenic chemicals of VOCs and pesticide were artificially mixed with the drinking water, which was then diluted close to natural water in order to examine treatment efficiency and draw optimal operation conditions. The samples used for this experiment include four chemicals phenol, chloroform, in VOCs and parathion, carbaryl in pesticide. As a result of the experiments conducted with simple, and compound solutions, the conditions to sufficiently dissolve and eliminate carcinogenic chemicals from the hybrid processing of where carcinogens were artificially added are : (hydrogen peroxide) prescribed solution 100 mg/L under pH 5.5~6.0, and the temperature $12{\sim}16^{\circ}C$, at the normal temperature and pressure. $d-O_3$ volume of 5.0 ppm and above and 30-40 minutes of reaction time are most appropriate and using MF/UF for membrane was ideal.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1224-1230
• /
• 2007

Recently, wireless LAN are often applied in home or office because of its various of convenience. Frequency rage of wireless LAN specified by IEEE 802.11a is at 5.2 GHz and IEEE 802.11b is 2.4 GHz. But in offices with wireless LAN devices, reflection of waves against walls, ceilings, floors and desks made of metal creates multipath problems that reduce communication speed and lose data. These problems can be solved by using EM wave absorber. In this paper, we designed and fabricated EM wave absorbers using MnZn-ferrite, sendust, carbon and CPE(Chlorinated Polyethylene). The EM wave absorber with the ratio of MnZn-Ferrite : sendust : CPE=64 : 16 : 20 wt.% has thickness of 3.7 mm and absorption ability more than 17 dB at 2.4 GHz and the EM wave absorber with the ratio of MnZn-ferrite : carbon : CPE=40 : 15 : 45 wt.% has thickness of 3.8 mm and absorption ability more than 23 dB at 5.2 GHz.

• Korean journal of applied entomology
• /
• v.46 no.3
• /
• pp.393-399
• /
• 2007

Two lepidopteran species, Matsumuraeses phaseoli (Matsumura) and Maruca vitrata (syn. M. testulalis) (Fabricius) were reared on artificial diets, and analyzed in their developmental characteristics. Photoperiod was supplied with 16L/8D for M. phaseoli and with 13L/11D for M. vitrata, respectively. Both species passed five larval instars with discrete sizes of head capsule width. In a constant environment ($25^{\circ}C$ and 65%RH), the developmental period of M. phaseoli egg, larva and pupa was 3.9, ca. 16.0 and 8.9 days, respectively, and over 80% of M. phaseoli larvae could develop into pupae, most of which emerged into adults. Newly laid eggs could be stored at $5^{\circ}C$ for 15 days with over 50% hatchability. Similar developmental traits were shown in M. vitrata. However, a low temperature preservation was not applicable to M. vitrata eggs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.275-284
• /
• 2017

As the 3D Greenery system is known to improve the urban environment, it works as new alternative for eco-friendly building and warrants further study for application to the domestic field. This study aimed to apply the design components for eco-friendly composition by investigating the spatial characteristics of the 3D Greenery System reflected in interior and exterior of buildings and to analyze the organization and design elements of domestic and foreign cases. The results showed that instances of the Greenery System tended to be a large scale and high-density development in order to expand various exterior spaces. Although its early forms were often found in such public facilities as exhibition and education purpose, cases of multi-unit dwelling have been growing. Allowing apartment residents to prefer intimate space by providing various such spaces for residential units and offering independent green spaces would induce diverse residents' lifestyles rather than monotonous design. The analysis also indicated that community space composed of various outdoor spaces and atmosphere would change life patterns of multi-housing and establish a real neighborhood through social interaction. Moreover, further investigation of the design patterns of outdoor space arrangement is needed since the Greenery system actively reflects the environmental characteristics of building sites and clearly shows a tendency to utilize natural terrain and slope in building shapes.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.9
• /
• pp.407-418
• /
• 2023

The Multi-Object Goal Visual Navigation(MultiOn) is a visual navigation task in which an agent must visit to multiple object goals in an unknown indoor environment in a given order. Existing models for the MultiOn task suffer from the limitation that they cannot utilize an integrated view of multimodal context because use only a unimodal context map. To overcome this limitation, in this paper, we propose a novel deep neural network-based agent model for MultiOn task. The proposed model, MCFMO, uses a multimodal context map, containing visual appearance features, semantic features of environmental objects, and goal object features. Moreover, the proposed model effectively fuses these three heterogeneous features into a global multimodal context map by using a point-wise convolutional neural network module. Lastly, the proposed model adopts an auxiliary task learning module to predict the observation status, goal direction and the goal distance, which can guide to learn the navigational policy efficiently. Conducting various quantitative and qualitative experiments using the Habitat-Matterport3D simulation environment and scene dataset, we demonstrate the superiority of the proposed model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.129-136
• /
• 2008

Along with the development in cutting-edge digital technology, the street space is also being changed. Mobile telecommunication units and internet give a big change in a human being's lifestyle. And the ubiquitous computing is proceeding with expanding its application range from the indoor space to the street space. As the street furniture is the convenient facility that allows a human being's life in street space to be abundant, it is getting advanced. First of all, in terms of such phenomenon, this study analyzed the cases of a research on application of street space and the actual condition of a change in the number of individuals for the street furniture, through a literature research of ubiquitous. Also, it researched into the realities of using the street furniture of the walking-desired streets at Daehac-ro and Hongdae district, where are two representative places related to digital generation. The next was carried out FGI (Focus Group Interview) with users of the street space in front of Hongik University and managers of the street furniture, and was researched into the use & management behavior, and recognition level on the street furniture. Thus, the key elements were extracted such as interchange of information for cultural activities, automation for interaction variability in function. Finally the core elements for future vision of street furniture in this digital era were extracted in 3I, namely, Information, Intellectualization, and Integration. This is considered to be applied to the establishment of direction in the process of high-tech digitalization in street furniture related to information hereafter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.240-246
• /
• 2019

The noise generated by construction machinery operating at construction sites is a major cause of environmental disputes with nearby residents. To reduce construction site noise, low noise construction machinery and low noise methods are recommended to be used first. In addition, the possible noise should be predicted and preventive measures suitable for the noise source should be taken. This study analyzed the sound power level of an excavator, which is used most frequently at construction sites. The sound power level of 297 excavators sold in Korea after 2008 were analyzed and the sound power level was classified according to the type, output (kW), and production site of the excavator engine based on the measured data. As a result, the sound power level decreased by 1 dBA depending on the change in engine type and the sound power level increased by approximately 3 dB (A) when the engine output was doubled. In addition, the sound power level was low in small-sized products of less than 55 kW for overseas products and medium and small-sized products of 55 to 104 kW for domestic products.