• Wind and Structures
• /
• v.5 no.2_3_4
• /
• pp.317-328
• /
• 2002

A numerical investigation on the turbulent flows over a three-dimensional steep hill is presented. The numerical model developed for the present work is based on the finite volume method and the SIMPLE algorithm with a non-staggered grid system. Standard $k-{\varepsilon}$ model and Shih's non-linear model are tested for the validation of the prediction accuracy in the 3D separated flow. Comparisons of the mean velocity and turbulence profiles between the numerical predictions and the measurements show good agreement. The Shih's non-linear model is found to predict mean flow and turbulence better than the Standard $k-{\varepsilon}$. Flow patterns have also been examined to explain the difference in the cavity zone between 2D and 3D hills.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.12 s.255
• /
• pp.1218-1227
• /
• 2006

In this paper a parametric study using an immersed boundary method has been carried out to investigate the effects of stable density stratification on the wakes past two identical three-dimensional hills aligned in tandem. The Reynolds number based on the uniform inlet velocity and twice the hill height was fixed at Re=300 while the Froude number based on the inlet velocity and the hill height was retained at Fr=0.2. Neutral flow without density stratification was also computed for comparison. Under a strong stratification, vertical motion of fluid particles over the three-dimensional hills is suppressed and the wake structures behind the hills become planar. Depending on the distance between the two hills, the flow pattern of each wake is significantly affected by the stratification. There is a critical hill distance at which flow characteristics drastically change. Qualitative and quantitative features of the wake interaction are reported.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.275-284
• /
• 2007

For precise interpretation of magnetotelluric (MT) data distorted by irregular surface terrain, topography effects are investigated by computing apparent resistivities, phases, tippers and induction vectors for a three-dimensional (3D) hill-and-valley model. To compute MT responses for the 3D surface topography model, we use a 3D MT modeling algorithm based on an edge finite-element method which is free from vector parasites. Distortions on the apparent resistivity and phase are mainly caused by distorted currents that flow along surface topography. The distribution of tipper amplitudes over both hill and valley are the same, while the tipper points toward the center of hill and the base of the valley. The real part of induction vector also points in the same direction as that of tipper, while the imaginary part in the opposite direction.

• Mycobiology
• /
• v.40 no.3
• /
• pp.151-158
• /
• 2012

Very few studies have addressed the phylogenetic diversity of fungi from Northeast India under the Eastern Himalayan range. In the present study, an attempt has been made to study the phylogenetic diversity of culturable soil fungi along the altitudinal gradients of eastern Himalayas. Soil samples from 24 m above sea level to 2,000 m above sea level altitudes of North-East India were collected to investigate soil micro-fungal community structure and diversity. Molecular characterization of the isolates was done by PCR amplification of 18S rDNA using universal primers. Phylogenetic analysis using BLAST revealed variation in the distribution and richness of different fungal biodiversity over a wide range of altitudes. A total of 107 isolates were characterized belonging to the phyla Ascomycota and Zygomycota, corresponding to seven orders (Eurotiales, Hypocreales, Calosphaeriales, Capnodiales, Pleosporales, Mucorales, and Mortierellales) and Incertae sedis. The characterized isolates were analysed for richness, evenness and diversity indices. Fungal diversity had significant correlation with soil physico-chemical parameters and the altitude. Eurotiales and Hypocreales were most diverse and abundant group of fungi along the entire altitudinal stretch. Species of Penicillium (D=1.44) and Aspergillus (D=1.288) were found to have highest diversity index followed by Talaromyces (D=1.26) and Fusarium (D=1.26). Fungal distribution showed negative correlation with altitude and soil moisture content. Soil temperature, pH, humidity and ambient temperature showed positive correlation with fungal distribution.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.2
• /
• pp.57-63
• /
• 1979

This study has been carried out to find out the optimum plant density and number of seedling per hill in the late season culture of rice at Chung Buk. P.O.R.D. Up to the level of 33 hills per m2 and 6 number of seedling per hill, rice yield was increased as the number of seedling per hill and plant density per unit areas increased. However it is recommendable to have a plant density of 28~33 hills per m$^2$ with 4~6 number of seedling per hill for the late season culture.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.48-57
• /
• 1979

In order to obtain a standard reference for designing an adequate power rice transplanter, the cutting forces depending upon variety of seedling, sowing density, seedling age and soil moisture content of mat-type seedling were measured by the rice transplanter installed with force measuring device of dynamic strain gage system in the laboratory. The result of this study are summarized as follows : 1. Cutting velocity and acceleration transplanting hoe obtained from jinematic analysis of planting mechanism was 1.32m/sec and 81.5m/$sec^2$ when planting crank-shaft rpm was 160. 2. Little difference between cutting forces on 30-days old seelings of japonica and Indica type was observed, as the cutting forces determined were 2.0kg per hill for Japonica type and 2.1kg per hill for Indica type. 3. Cutting forces determined on 40-days old seedlings were 2.5kg, 2.3kg, 3.1kg and 2.9kg per hill for Milyang No.15, Tongil, Akibare and Milyang No.23 compared to the other varieties. 4. The cutting force was not greatly affected by the sowing densities , only five percent of differences were observed epending upon the sowing densities. 5. Cutting forces were 2.7kg and 2.0kg per hill on 40-days old seedlings and 30-days old seedlings respectively. About 38 percent of more forces was required in cutting 40-days old seedling than in cutting 30-days old seedlings. 6. More cutting forces were required as soil moisture content of mat-type seedling was decreased. 7. Root length after cutting by the planting hoe and their relationships with soil moisture content on 30-days old seedlings, are as follows ; $y=4.147-11.384x+ 28.854x^2$ where , $y$=root length after cutting. (cm) , $x$=soil ture content of mat type seedlings.(%, d.b.) 8. Cutting forces were varied with the width of cuttings ; those on 40-days old mat type seedlings were 2.7kg and 2.2kg per hill when cutting with 14 mm and 10mm of width respectively, about 32 percent of more forces was required when cuting with 14mm of width compared to 10mm of width.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.3
• /
• pp.209-215
• /
• 2007

The purpose of this study was to investigate gait factor and muscle activity depending on hiking poles-using. Eight healthy men volunteered for this experiment. Each of them performed down-hill walking with hiking poles-using and without poles at speed of 3.5km/h for 45 minutes on a treadmill. The treadmill was set 25% down-hill inclination. Kinematic data collected in 60Hz were recorded and analyzed by using 2D motion capture system to measure step time and step length so on. And the lower extremity muscle activities were simultaneously recorded in 1500Hz and assessed by using EMG. The statistical analysis was the paired t-test with repeated measures to compare between hiking poles-using and without poles. The level of statistical significance for all tests was .05. The results of this study were following : Step time was showed statistically different according to pole conditions. That is, the case of poles-using was longer than without poles in step time. Also, step length was showed statistically different between two conditions. Step length about trials with poles was longer than trials without poles. In the muscle activity, the case of all muscles was not showed statistical significance about pole conditions. However, in most muscles IEMG, there were some decreasing-trend relatively when hiking polesusing.

• Korean Journal of Weed Science
• /
• v.13 no.2
• /
• pp.89-95
• /
• 1993

The Inhibiting activity of newly synthesized phenol (E-series) and triazine (T-series) derivatives was evaluated by using thylakoid membranes extracted from cyanobacteria (Anacystis nidulans $R_2$). There were no significant differences between phenol derivatives and dinoseb to the thylakoid membrane extracted from wild type in the Hill reaction. However, a phenol derivative, E-24 which has no -Cl at phenyl ring, did not show any activity. The longer the length of R substituents was in phenol derivatives, the lower inhibiting activity was in the Hill reaction. Triazine derivatives, T-27, T-28, T-40, T-41, T-47 and T-48 were also compared with diuron and atrazine. Among triazine compounds, T-27 and T-28 showed 10 and 30 times activity as high as atrazine to wild type, respectively. Other triazine derivatives, T-40, T-41, T-47 and T-48 showed low inhibiting activity to wild and mutant type. A structural difference of T-27 and T-28 from T-40, T-41, T-47 and T-48 was the presented of -C-NH-. Both T-27 and T-28 were very closely associated with serine, an amino acid located at the 264th position of D1 protein because of the resistant ratio(R/S) to mutant G-264 were higher than that of atrazine.

• Bulletin of the Korean Chemical Society
• /
• v.4 no.3
• /
• pp.120-123
• /
• 1983

The reaction of hexacyanoferrate (Ⅲ) with nitrotoluenes in aqueous acetic acid containing perchloric acid(1.0 M) at $50^{\circ}C$ gave the corresponding aldehyde as the major product. The order with respect to each of the reactants ― substrate, oxidant and acid ― was found to be unity. The Hammett plot yielded a ${\sigma}^+$ value of -1.30, and the kinetic isotope effect gave a $k_H/k_D$ value of 6.2. The pathway for the conversion of the nitrotoluenes to the products has been mechanistically visualized as proceeding through the benzylic radical intermediate, formed in the rate determining step of the reaction.

• Journal of Powder Materials
• /
• v.29 no.4
• /
• pp.303-308
• /
• 2022

The plastic deformation behavior of additively manufactured anisotropic structures are analyzed using the finite element method (FEM). Hill's quadratic anisotropic yield function is used, and a modified return-mapping method based on dual potential is presented. The plane stress biaxial loading condition is considered to investigate the number of iterations required for the convergence of the Newton-Raphson method during plastic deformation analysis. In this study, incompressible plastic deformation is considered, and the associated flow rule is assumed. The modified return-mapping method is implemented using the ABAQUS UMAT subroutine and effective in reducing the number of iterations in the Newton-Raphson method. The anisotropic tensile behavior is computed using the 3-dimensional FEM for two tensile specimens manufactured along orthogonal additive directions.