• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1290-1295
• /
• 2014

In this paper, various configurations of octagonal wound transformer core topology, which has previously proved advantages on conventional wound cores, are studied. Each configuration has different joint types and different placement of joint zones on the core. Magnetic flux distributions and power losses of each configuration are analyzed and compared. Comparisons are based on both 2D&3D finite element simulations and experimental studies. The results show that, joint types and their placements on the core cause local flux accumulations and dramatically affect power loss of the core.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1586-1595
• /
• 2018

For the problem that the complexity of 3-D modeling and multi parameter optimization, as well as the uncertainty of the winding factor of axial flux permanent magnet generator with coreless windings. The complex 3-D model was simplified into 2-D analytic model, and an analytical formula for the winding factor that adapting different coreless stator winding is proposed in this paper. The analytical solution for air-gap magnetic fields, no-load back EMF, electromagnetic torque, and efficiency are calculated by using this method. The multiple objective and multivariable optimization of the maximum fundamental and the minimum harmonic content of back EMF are performed by using response surface methodology. The proposed optimum design method was applied to make a generator. The generator was tested and the calculated results are compared with the proposed method, which show good agreements.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.387-392
• /
• 2016

Lower flux leakage designs have become important in the development of microspeakers used in thin and miniaturized mobile phones. We propose four methods to reduce the flux leakage of the magnetic circuit in a microspeaker. Optimization was performed based on the proposed approach by using the response surface method. Electromagnetic analyses were conducted using the finite element method. Experimental results are in good agreement with the simulated results obtained in one degree-of-freedom analysis from 100 to 5 kHz. Both the simulated and experimental results confirm that one of the proposed methods is much more effective in reducing flux leakage than the other methods. In the optimized method, compared with a default approach, the average radial flux density in the air gap decreased only by 5.5%, the maximum flux leakage was reduced by 28.6%, and the acoustic performance at primary resonance decreased by 0.45 dB, which gap is indiscernible to the human ear.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.210-211
• /
• 2007

Once high current flows through the vacuum interrupter, eddy current occurs due to the time-varying axial magnetic field caused by the current(AC) and it causes a decrease in axial magnetic field generated by current flowing through coil electrode. but if there are slots on contact electrode it is possible to increase the amplitude of axial magnetic field by reducing the influence of eddy current. there has been many studies about the number of slot of the contact electrode[1][2][3]. In this paper, in addition to these previous results we deal with the influence of the length and width of the slots on axial magnetic field at the mid-gap plane in 4 segment coil type vacuum interrupter by using 3D finite element method software.

• Structural Engineering and Mechanics
• /
• 제67권3호
• /
• pp.267-275
• /
• 2018

A numerical study of soil-foundation system under monotonic and cyclic pushover loading is conducted, taking into account both material and geometric nonlinearities. A complete and refined 3D finite element (FE) model, using contact condition and allowing separation between soil and foundation, is implemented and used in order to evaluate the nonlinear relationship between applied vertical forces and induced settlements. Based on the obtained curve, a simplified model is proposed, in which the soil inelasticity is satisfactorily represented by two vertical springs with trilinear behavior law, and the foundation uplifting is insured by gap elements. Results from modeling soil-foundation system supporting a bridge pier have shown that the simplified model is able to capture irreversible settlements induced by cyclic rocking, due to soil inelasticity and vertical loading, as well as large rotations due to foundation uplifting.

• 한국전자파학회논문지
• /
• 제11권4호
• /
• pp.505-513
• /
• 2000

본 논문에서는 편파 다이버서티(j:X)larization diversity)용 광대역 안테나에 대한 성능을 개선하기 위한 새로운 구조를 제안하였다. 이중 편파 마이크로스트립 안테나를 구현하기 위하여 십자형 개구변을 두었고, 개구면 위와 아래에 두 j:X)rt가 서로 수직이 되도록 급전부를 셜계하였다. 그리고 방사소자와 급전부에 air gap을 주었으며 후 방 방사를 줄이기 위해 아래 급전부로부터 $\lambda$/4 떨어뜨려서 반사판을 두었다. 더욱 넓은 대역폭을 가지도록 방 사 패치에 톱니 모양의 perturbation을 주었으며, 패치의 perturbation 효과에 의해 안테나 크기가 줄어들게 됨으 로써 배열 안테나의 크기도 상당히 줄어들었다. 제안된 단일 소자 안테나를 이용하여 $1\times4$ 배열 안테나 구조를 가진 PCS 기지국용 편파 다이버시티 안테나 를 제작하였다. 단일 소자 안테나는 각각 port 당 10.3 %, 11.3 %(VSWR<1.3)의 대역폭을 가지고 두 port간의 분리도가 -40 dB 이상이다. 또한 배열 안테나의 대역폭은 각각 13.2 %, 12.7 %(VSWR <1.3)이고 -36 dB의 분 리도와 10 dB의 XPD를 가진다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.637-638
• /
• 2006

Different from the conventional motor, the superconducting motor has so large air-gap that the actual parameters such as excitation voltage have considerable difference from the values obtained from 2-dimensional electromagnetic analysis. This paper introduces 3-dimensional EMCH(Equivalent Magnetic Circuit Network) method or FLUX-3D FEM(Finite Element Method) software to reduce the error originated from the 2-dimensional electromagnetic analysis for the development of a 1 MW class high-temperature superconducting motor.

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.581-587
• /
• 2013

Among different linear motors, single-sided linear induction motors have been widely used in industry due to their simplicity and low construction cost. However, these types of motors suffer from low efficiency and power factor. In this paper, an effective procedure is proposed to design single-sided linear induction motors. The designed motor is simulated in MATLAB software in order to investigate the effect of design parameters on the performance of the machine. Regarding the obtained results, the Genetic Algorithm is employed to optimize the design considering product of efficiency and power factor as objective function. The results show significant improvement of the performance. Finally, experimental results and 2D finite element method is used to validate the model parameters and the optimization results.

• 한국강구조학회 논문집
• /
• 제16권5호통권72호
• /
• pp.599-607
• /
• 2004

건물이 고층화되어 가면서 철골구조 사용이 빈번해지고 있으며 철골구조물의 큰 축력을 받는 기둥에 있어서 이음부 설계가 중요한 문제가 되고 있다. 한편, 미국 AISC 기준에서는 기둥이음에서 지압내력으로 모든 압축축력을 전달할 수도 있으나, 우리나라 기준에서는 소요압축축력의 1/4만을 접촉면에 의해 직접전달 시킬 수 있다고 제한함에 따라 메탈터치를 활용한 기둥이음에 대한 새로운 방법의 개발이 제한되고 있는 실정이다. 따라서 본 논문에서는 기존 볼트, 용접 체결된 실험체에 이음부 틈의 크기를 매개변수로 하는 실험체의 응력전달체계를 규명하고, 메탈터치 정도에 따른 철골기둥 이음부의 압축축력전달 메카니즘을 검증한다. 또한 해석과 실험을 통하여 틈의 크기에 따른 거동 양상을 파악하여 메탈터치에 의한 이음부에서의 응력전달체계에 대한 확인과 이론적 기초를 제시하고자 한다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.360-363
• /
• 2004

This review is concerned with the MP (multipactor) phenomena of the diplexer for RFDU DM of next generation satellite. The MP discharge is serious problems to design RF components in space applications such ase damage of physical structure, performance degradation, and mission failure of the satellite. In this work, we employed the 3D finite element method (FEM) to calculate the critical gap points and adopted ESTEC curve, MP susceptibility zone, to analyze the maximum handling RF power in the diplexer. And this work also recommends that one should design the tx filter of the diplexer which is more wider bandwidth upto the points to escape the ears of the group delay especially the cavity type of RF components in space applications.