• 대한기계학회논문집A
• /
• 제25권4호
• /
• pp.602-609
• /
• 2001

This paper is concerned with the orthotropic problem of diaphragm-type air springs which consist of rubber linings, nylon reinforced rubber composite and bead ring. The analysis is carried out with a finite element method developed to consider the orthotropic properties, geometric nonlinearity using four-node degenerated shell element with reduced integration. Physical stabilization scheme is used to control the zeroenergy mode of the element. The analysis includes an inflation analysis and a lateral analysis of an air spring for the deformed shape and the spring load with respect to the vertical and l ateral deflection. Numerical results demonstrate the variation of the outer diameter, the fold height, the vertical force and the lateral force with respect to the inflation pressure and the lateral deflection.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.274-279
• /
• 2000

This paper is concerned with the orthotropic problem of diaphragm-type air springs which consist of rubber linings, nylon reinforced rubber composite and bead ring. The analysis is carried out with a finite element method developed to consider the orthotropic properties, geometric nonlinearity using four-node degenerated shell element with reduced integration. Physical stabilization scheme is used to control the zero-energy modes of the element. An inflation analysis and a lateral deformation analysis of an air spring are carried out. Numerical analysis results demonstrate the variation of the outer diameter, the fold height, the vertical force and the lateral force.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권1호
• /
• pp.83-89
• /
• 2004

Flare nut is an important Part that used to joint a brake tube-end in automobiles. It was made of SWCH 10A by machining. But we studied to make it by metal forming. The main focus of this paper is to investigate an optimal forging processes for flare nut using the DEFORM$^{TM}$-3D. commercially available finite element code and tests. Actually an explicit finite element analysis of the flare nut forging processes has been carried out to predict an optimal shape of the flare nut and its results were reflected in the tests of the forging processes design for flare nut. The simulation results which had obtained from finite element analysis were contributed to the forging processes design for flare nut. An optimal shape of nave nut showed agreements with test results. Furthermore. this paper should contribute to a development of the forging process for a variety of parts.s.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권3호
• /
• pp.238-242
• /
• 2005

In this paper, a surface permanent magnet motor made of the Soft Magnetic Composites (SMC) is analysed using the 3-D finite element method. By comparing with the motor made of the silicon steel sheets, the usefulness of the SMC for the eddy current loss is clarified quantitatively.

• 인터넷정보학회논문지
• /
• 제24권2호
• /
• pp.27-36
• /
• 2023

도파관(waveguide)은 전자기파를 원하는 방향으로 안내하는 전송선로로 의료기기, 레이더 시스템, 위성 통신 등 다양한 분야에 활용되고 있다. 이러한 도파관의 설계 및 최적화를 위해서는 전자기 수치해석(CEM: Computational Electromagnetics)이 필수적이다. 수치해석 기법의 하나인 유한요소법(FEM: Finite Element Method)은 도파관과 같은 닫힌 영역 내부의 전자기 문제를 해결하는데 효율적이며 이를 적용하기 위해서는 계산영역을 한정시키기 위한 경계조건이 필요하다. 본 논문에서는 계산영역 밖으로 나가는 전자파의 반사를 최소화하기 위한 흡수경계조건(ABC: Absorbing Boundary Condition)과 주 모드 뿐만 아니라 고차 모드까지 흡수할 수 있는 도파관 포트 경계조건(WPBC: Waveguide Port Boundary Condition)을 각각 적용하여 2/D 및 3/D 도파관 구조에 대한 전자기 시뮬레이션을 수행하였다. 이후, 대표적인 전자파 상용 소프트웨어인 HFSS와의 결과 비교를 통해 해석의 정확성을 검증하였으며, 시뮬레이션 결과를 통해 WPBC를 적용하면 ABC보다 더 작은 해석 영역으로 구조 해석이 가능하다는 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1753-1755
• /
• 1996

This paper presents an analysis of the 3D microwave oven considering its forming. The results were compared with experimental data. Finite Element Method(FEM) using edge clement is employed for the analysis. For solving the large sparse system matrix equation was solved using the parallelized QMR method. Analysis of the 3d cavity has troublesome difficulties such as spurious solutions, too many memory and long computation time. We overcome this difficulties by using edge clement for spurious solutions and the parallelized QMR method by the aid of Paralle Virtual Machine(PVM) for the memory and computation time.

• Advances in aircraft and spacecraft science
• /
• 제10권2호
• /
• pp.179-202
• /
• 2023

This article presents a numerical analysis to investigate the natural frequencies and harmonic response of a perforated cantilever beam attached to two layers of piezoelectric materials by using the finite element method for the first time. The bimorph piezoelectric is composed of 3 layers; two of them at the outer are piezoelectric, and the inner isotropic material. A higher order 3-D 20-node solid element that exhibits quadratic displacement behavior is exploited to discretize the isotropic layer, and coupled piezoelectric 3D element with twenty nodes is used to mesh the top and bottom layers. CIRCU94 element is added to act as a resistor part of the model. The proposed model is validated with previous works. The numerical parametric studies are presented to illustrate the effects of perforation geometry, the number of rows, the resistance on the natural frequencies, frequency response, and power. It is found that the thickness has a positive relationship with the natural frequency. Perforations help in producing higher voltage, and the best shape is rectangular perforations, and to produce higher voltage, two rows of rectangular perforations should be applied.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.764-771
• /
• 2006

The use of 3-D finite elements for the eigen analysis of beam-like structures with arbitrary section shape may not be practical in certain cases, from the aspect of CPU time. In this connection, this paper presents a systematic algorithm for decomposing an arbitrary section into finite number of basic ones and computing essential sectional quantities required for the eigen analysis using the beam theory. The numerical accuracy of the proposed method is assesed from the comparison with the 3-D finite . element method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.137-140
• /
• 2003

To the optimization design of molded case circuit breakers(MCCBs), it is necessary and important to calculate the electro-dynamic repulsion force acting on the movable conductor. With 3-D finite element nonlinear analysis, according to the equations among current-magnetic field-repulsion force and taking into account the ferromagnet, contact bridge model is introduced to simulate the current constriction between contacts, so Lorentz and Holm force acting on the movable conductor and contact, respectively, can be integrated to calculate. Coupled with circuit equations, the opening time of movable contact also can be obtained using iteration with the restriction of contact force. Simulation and experiment for repulsion forte and opening time of five different configuration models have been investigated. The results indicate that the proposed method is effective and capable of evaluating new design of contact systems in MCCBs.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.251-255
• /
• 2015

Thermal deformation, such as bending and twisting, occurs among the polymer parts of air-conditioner indoor units because of repetitive temperature change during heating operation. In this study, a numerical method employing finite-element analysis to efficiently simulate the thermal deformation of an assembly is proposed. Firstly, the displacement of an actual assembly produced by thermal deformation was measured using a 3D optical measurement system. The measurement results indicated a general downward sag of the assembly, and the maximum displacement value was approximately 1 mm. The temperature distribution was measured using a thermographic camera, and the results were used as initial-temperature boundary conditions to perform temperature-displacement analysis. The simulation results agreed well with the measured data. To reduce the thermal deformation, the stiffness increased 100%. As the results, the maximum displacement decreased by approximately 5.4% and the twisting deformation of the holder improved significantly.