• Journal of Astronomy and Space Sciences
• /
• v.27 no.3
• /
• pp.239-244
• /
• 2010

A simulation for the design of a $90^{\circ}$ differential phase shifter aimed toward Korean VLBI Network (KVN) 129 GHz band polarizer is described in this paper. A dual-circular polarizer for KVN 129 GHz band consists of a $90^{\circ}$ differential phase shifter and an orthomode transducer. The differential phase shifter is made up of a square waveguide with two opposite walls loaded with corrugations. Three-dimensional electromagnetic simulation has been performed to predict the $90^{\circ}$ differential phase shifter's characteristics. The simulation for the differential phase shifter shows that the phase shift is $90^{\circ}{\pm}3.3^{\circ}$ across 108-160 GHz and the return losses of two orthogonal modes are better than -30 dB within the design frequency band. According to the simulation results the calculated performance is quite encouraging for KVN 129 GHz band application.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.314-319
• /
• 2012

In this paper, a repeater antenna operating at MICS and ISM bands is proposed and the antenna performance including the human body effect is investigated. The proposed antenna is composed of a ZOR(Zeroth Order Resonator) and a loop antenna. A loop antenna is operated at ISM band and a loop antenna capacitively coupled with a ZOR acts as an antenna for MICS band. Simulation was carried out in order to analyze the effects of human body on antenna performance when a human body is located in the near field of an antenna. According to the simulated and measured results, the proposed antenna has -10 dB $S_{11}$ bandwidth wide enough to cover both MICS and ISM bands. The measured peak gains are -28.53 dBi and 3.85 dBi at MICS and ISM band, respectively. The dual band and radiation properties of the proposed antenna are well suited for the WBAN repeater system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1248-1253
• /
• 2008

The MCS(Micro-Coplanar Strip) line with ground has been analyzed. The conformal mapping method is used to calculate the quasi-static effective dielectric constant and characteristic impedance of this MCS line. The computed results of the present work are found to be in good agreement when compared with the results obtained using commercial S/W, IE3D. And in this paper, the stepped-impedance low pass filter is designed and fabricated with MCS lines for improving the frequency responses. The LPF proposed structure has been also designed and implemented to have the sharp attenuation characteristics in stop band. The agreement between simulation and measurement results verify the implemented LPF.

• Journal of electromagnetic engineering and science
• /
• v.8 no.2
• /
• pp.70-75
• /
• 2008

In this paper, the EM wave absorber was designed and fabricated for countermeasure against EMI from a ceiling of a tollgate in ETC system. We fabricated several samples in different composition ratios of MnZn-ferrite, Carbon, and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability according to composition ratio. The optimized mixing ratio of MnZn-ferrite, Carbon, and CPE was found as 40:15:45 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has the thickness of 3.3 mm and absorption ability was more than 20 dB in the case of normal incidence and more than 11 dB for the incident angle from 15 to 45 degrees at 5.8 GHz. Therefore, it was confirmed that the newly developed absorber can be used for ETC system.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.1
• /
• pp.66-76
• /
• 1995

In this paper, the error rate performance of DS/SSMA system in multipath fading channel is calculated by computer simulation. At first, the multipath fading channel is modeled with TDL(Tap Delay Line) model. The characteristics of channels, including multipath fading effects and error pattern, are examined by doppler frequency and signal bandwidth, and time spread variation. Using the multipath fading channel model, the error rateperformance of block code and convolutional code is compared, thus the coding sys- tem is applied to the DS / SSMA system. The BER results of DS / SSMA system show that the proposed receiver gives about 2~3[dB] improve- ment compared with the conventional receiver.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.10
• /
• pp.841-847
• /
• 2021

In this paper, the applicability of the low-density surface film copper mesh for aircraft applications have been analyzed. Recently, low-density surface film copper mesh is developed to reduce weight and cost compared with traditional surface film copper mesh. In order to apply low-density surface film copper mesh to aircraft, it is needed to analyze its electromagnetic effects as well as structural integrity with sandwich panels to prevent pinholes. The structural integrity and electromagnetic characteristics have been analyzed for 2 samples of low-density surface film copper mesh and 1 sample of surface film copper mesh. To review the applicability of the low-density surface film, it is combined with sandwich composite panel to confirm pinhole effects. The low-density surface film has been modeled as a periodic structure and analyzed with 3D electromagnetic simulation tool. The simulation results has been verified through measured electromagnetic transmission results using free space measurements. From the results, it will be possible to use these results for the analysis and the applicability of low-density surface film copper mesh for aircraft.

• Journal of Digital Convergence
• /
• v.11 no.1
• /
• pp.283-288
• /
• 2013

In this study, we introduce a 3D micro-cell simulator for radio wave propagation analysis in indoor environments. Previous studies treat only the path loss between the transmitter and receiver in 2D geometry. We provide the simulation results of indoor propagation prediction based on various ITU-R Recommendations. Simulation results described here indicate that the low and high frequency bands give quite different characteristics in presented indoor geometry. The propagation loss as a function of distance has two distinct regions. It is similar to that occurring in free space within 5-20m of the transmitter, however, increases significantly as the electromagnetic waves become obstructed by the walls at distances further away in the next region.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.1
• /
• pp.80-85
• /
• 2003

In this study, we developed an analysis method of plate forming by induction heating, verifying the effectiveness of the present method through a series of experiments. The phenomena of the induction heating involves a 3D transient problem, coupled with electromagnetic, heat transfer, and elastoplastic large deformation analyses. To solve the problem, or present an appropriate model and an integrated system. Using the present analysis model, or can estimate the plate deformation in heating without experiments and simulate the plate bending process of induction heating.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.253-260
• /
• 2016

This paper proposes a planar Log-Periodic Dipole Array(LPDA) antenna with light-weight supporting structure for installing on an aircraft. The proposed antenna is designed by applying a planar skeleton supporting structure that has light-weight for an aircraft and is capable of withstanding structural vibration. The material of the planar skeleton supporting structure is a Polyether ether ketone(Peek) which has excellent characteristics on strength and temperature. The proposed antenna is fabricated by attaching the radiating elements of the LPDA on both sides of the supporting structure. The changed input impedance due to the dielectric material of the supporting structure was compensated for by controlling the distance and length of several radiating elements. The 10-dB return loss bandwidths of the designed planar LPDA antenna with light-weight supporting structure are obtained as 0.4~3.1 GHz(7.3:1) in the simulation and 0.41~3.5 GHz(8.2:1) in the measurement. The average gains in 0.5~3 GHz band are 6.77 dBi in the simulation and 6.55 dBi in the measurement. Therefore, we confirm that the designed antenna is appropriate to be installed on an aircraft due to its light-weight structure and wideband directional radiation characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.5
• /
• pp.359-365
• /
• 2018

Herein, electromagnetic shielding structures to reduce the external noise coupling to printed spiral coils (PSCs) and a design method for improving the bandwidth of shielded PSCs have been proposed. It has been demonstrated that the bandwidth of shielded PSCs is limited due to the parasitic capacitance between the coils and the shielding structures and is confirmed by the transfer function simulation of the shielded PSCs with a transmission line as the radio-frequency interference noise source. A design method for the bandwidth improvement of the shielded PSCs has been proposed based on the equivalent circuit model analysis and the case studies depending on PSC designs with a three-dimensional field simulation. With the design method, an optimized shielded PSC design has been presented and successfully confirmed by experimental verification in that the optimized design results in a significant bandwidth improvement.