• Journal of the Korea Computer Industry Society
• /
• v.7 no.5
• /
• pp.455-466
• /
• 2006

In this paper, 3D objects is created from the real scene that is used by an active sensor, which gets depth and RGB information. To get the depth information, this paper uses the $Zcam^{TM}$ camera which has built-in an active sensor module. <중략> Thirdly, calibrate the detailed parameters and create 3D mesh model from the depth information, then connect the neighborhood points for the perfect 3D mesh model. Finally, the value of color image data is applied to the mesh model, then carries out mapping processing to create 3D object. Experimentally, it has shown that creating 3D objects using the data from the camera with active sensors is possible. Also, this method is easier and more useful than the using 3D range scanner.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.270-273
• /
• 1999

Circular dynamic stereo has special advantages as it enables a 3-D measurement using a single TV camera and also enables a high accurate measurement without a cumbersome calibration. Annular particle streaks are recorded using this system and the size of annular streaks directly concerns to the depth from TV camera. That is, the size of annular streaks is inversely proportional to the depth from the TV camera and the depth can be measured automatically by image processing technique. Overlapped streaks can be processed also by our method. The flow measurement in a water tank is one of the applications of our system. Tracer particles are introduced into the water in a flow measurement. Since the tracer particles flow with water, three-dimensional velocity distributions in the water tank can be obtained by measuring the all movement of tracer particles. Experimental results demonstrate the feasibility of our method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.765-768
• /
• 2008

To make 3D camera system, we check the possibility of advanced range camera module based on measuring the time delay of modulated infrared light, using a single detector chip fabricated on standard CMOS process. To depth information, electronic shutter and interlaced scanning method of 2D sensor is needed. Especially, we design "lens system, illumination unit" and review simulation result.

• Smart Media Journal
• /
• v.2 no.4
• /
• pp.60-65
• /
• 2013

In this paper, we propose a high-resolution disparity map generation method using a low-resolution time-of-flight (TOF) depth camera and color camera. The TOF depth camera is efficient since it measures the range information of objects using the infra-red (IR) signal in real-time. It also quantizes the range information and provides the depth image. However, there are some problems of the TOF depth camera, such as noise and lens distortion. Moreover, the output resolution of the TOF depth camera is too small for 3D applications. Therefore, it is essential to not only reduce the noise and distortion but also enlarge the output resolution of the TOF depth image. Our proposed method generates a depth map for a color image using the TOF camera and the color camera simultaneously. We warp the depth value at each pixel to the color image position. The color image is segmented using the mean-shift segmentation method. We define a cost function that consists of color values and segmented color values. We apply a weighted average filter whose weighting factor is defined by the random walk probability using the defined cost function of the block. Experimental results show that the proposed method generates the depth map efficiently and we can reconstruct good virtual view images.

• Journal of Broadcast Engineering
• /
• v.19 no.4
• /
• pp.533-546
• /
• 2014

This paper presents a method for a hybrid (color and depth) camera system construction using a photogrammetric technology. A TOF depth camera is efficient since it measures range information of objects in real-time. However, there are some problems of the TOF depth camera such as low resolution and noise due to surface conditions. Therefore, it is essential to not only correct depth noise and distortion but also construct the hybrid camera system providing a high resolution texture map for generating a 3D model using the depth camera. We estimated geometry of the hybrid camera using a traditional relative orientation algorithm and performed texture mapping using backward mapping based on a condition of collinearity. Other algorithm was compared to evaluate performance about the accuracy of a model and texture mapping. The result showed that the proposed method produced the higher model accuracy.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.93-99
• /
• 2015

In this paper, we propose a gaze correction method for realistic video teleconferencing. Typically, cameras used in teleconferencing are installed at the side of the display monitor, but not in the center of the monitor. This system makes it too difficult for users to contact each eyes. Therefore, eys contact is the most important in the immersive videoconferencing. In the proposed method, we use the stereo camera and the depth camera to correct the eye contact. The depth camera is the kinect camera, which is the relatively cheap price, and estimate the depth information efficiently. However, the kinect camera has some inherent disadvantages. Therefore, we fuse the kinect camera with stereo camera to compensate the disadvantages of the kinect camera. Consecutively, for the gaze-corrected image, view synthesis is performed by 3D warping according to the depth information. Experimental results verify that the proposed system is effective in generating natural gaze-corrected images.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.2
• /
• pp.99-109
• /
• 2013

In this paper, we propose a new system which captures real depth and color information from natural scene and implemented it. Based on it, we produced stereo and multiview images for 3-dimensional stereoscopic contents and introduced the production of a digital hologram which is considered to the next-generation image. The system consists of both a camera system for capturing images which correspond to RGB and depth images and softwares (SWs) for various image processings which consist of pre-processing such as rectification and calibration, 3D warping, and computer generated hologram (CGH). The camera system use a vertical rig with two paris of depth and RGB camera and a specially manufactured cold mirror which has the different transmittance according to wavelength for obtaining images with the same view point. The wavelength of our mirror is about 850nm. Each algorithm was implemented using C and C++ and the implemented system can be operated in real-time.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.40-43
• /
• 1997

This paper presents a 3D object recognition method for generation of 3D environmental map or obstacle recognition of mobile robots. An active light source projects a stripe pattern of light onto the object surface, while the camera observes the projected pattern from its offset point. The system consists of a laser unit and a camera on a pan/tilt device. The line segment in 2D camera image implies an object surface plane. The scaling, filtering, edge extraction, object extraction and line thinning are used for the enhancement of the light stripe image. We can get faithful depth informations of the object surface from the line segment interpretation. The performance of the proposed method has demonstrated in detail through the experiments for varies type objects. Experimental results show that the method has a good position accuracy, effectively eliminates optical noises in the image, greatly reduces memory requirement, and also greatly cut down the image processing time for the 3D object recognition compared to the conventional object recognition.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.445-446
• /
• 2019

Recently, attention has been focused on mixed reality (MR) technology, which provides an experience that can not be realized in reality by fusing virtual information into the real world. Mixed reality has the advantage of having excellent interaction with reality and maximizing immersion feeling. In this paper, we propose a method to acquire a point cloud for the production of mixed reality contents using multiple Depth and RGB camera system.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.119-120
• /
• 2008

A HMD type multi-focus 3D display system is developed and proof about satisfaction of eye accommodation is tested. Four LEDs(Light Emitting Diode) and a DMD are used to generate four parallax images at single eye and any mechanical part is not included in this system. The multi-focus means the ability of monocular depth cue to various depth levels. By achieving multi-focus function, we developed a 3D display system for only one eye, which can satisfy the accommodation to displayed virtual objects within defined depth. We could achieve a result that focus adjustment is possible at 5 step depths in sequence within 2m depth for only one eye. Additionally, the change level of burring depending on the focusing depth is tested by captured photos and moving pictures of video camera and several subjects. And the HMD type multi-focus 3D display can be applied to a monocular 3D display and monocular AR 3D display.