• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.3
• /
• pp.274-280
• /
• 2007

The effect of biofertilizer in enhancing nutrient quality and antioxidant property of rice grain was investigated. The experiment was carried out in a randomized complete block design with 3 replications and 7 treatments namely : RF = $N-P_2O_5-K_2O(11-5.5-4.8kg\;10a^{-1});$ half of the recommended fertilizer rate, $HRF=N-P_2O_5-K_2O(5.5-2.75-2.4kg\;10a^{-1}):$ HRF+Bio 250=HRF combined with 250 kg Biofertilizer 10 $a^{-1}$; HRF+Bio 500=HRF combined with 500 kg Biofertilizer 10 $a^{-1};$ Bio 250=250 kg Biofertilizer 10 $a^{-1};$ Bio 500=500 kg Biofertilizer 10 $a^{-1};$ and NF=No Fertilizer. Results showed that HRF+Bio 500 obtained a significantly higher protein content but a significantly lower amylose content compared with RF and NF treatments. Highest phytic acid content was recorded in NF treatment while the lowest was observed in HRF+500 treatment. The highest values in both electron donating ability and reducing power were obtained in HRF+Bio 500 treatment. All treatments obtained higher reducing power than that of the RF treatment and that NF treatment showed comparable values in both electron donating ability and reducing power with those of the treated plots. Highest antimutagenicity property was also observed in HRF+Bio 500 treatment followed by Bio 500 treatment. This study showed the possibility of using biofertilizer to enhance nutritional quality and antioxidant property of rice.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.522-527
• /
• 2015

Decision of available soil depth based on soil physical and hydraulic properties for the $3^{rd}$ Landscape Vegetation Project in the Incheon International Airport was attempted. The soil samples were collected from the 8 sites at different depths, 0-20 and 20-60cm, for the three project fields, A, B, and C area. Physical and chemical properties including particle size distribution, organic matter content and electrical conductivity were analyzed. Hydrological properties including bulk density and water holding capacity at different water potential, -6 kPa, -10 kPa, -33 kPa, and -1500 kPa were calculated by SPAW model of Saxton and Rawls (2006), and air entry value was calculated by Campbell model (1985). Based on physical and hydrological limitation, feasibility and design criteria of soil depth for vegetation and landfill were recommended. Since the soil salinity of the soil in area A area was $19.18dS\;m^{-1}$ in top soil and $22.27dS\;m^{-1}$ in deep soil, respectively, landscape vegetation without amendment would not be possible on this area. Available soil depth required for vegetation was 2.51 m that would secure root zone water holding capacity, capillary fringe, and porosity. Available soil depth required for landscape vegetation of the B area soil was 1.51 m including capillary fringe 0.14 m and available depth for 10% porosity 1.35 m. The soils in this area were feasible for landscape vegetation. The soil in area C was feasible for bottom fill purpose only due to low water holding capacity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.1
• /
• pp.83-89
• /
• 1994

The effects of inorganic selenium (Se), selenate and selenite on Se balance levels in the different ruminal fluid fractions were studied using Japanese Corriedale wethers with an average body weight of 47 kg. A $3{\times}3$ Latin square design was used with three animal, three periods and three treatments. In each period, there was 7 d dietary adjustment followed by 5 d total collection of urine and feces. Ruminal fluid samples were obtained at 0, 1, 3, 5 and 7 h postprandially on the final day of the collection period. The three dietary treatments were: (1) without Se supplementation (control); (2) with Se supplement as sodium selenate; and (3) sodium selenite at a rate of 0.2 mg Se/kg dietary DM. The basal diet was timothy hay (Phleum pratense L.) fed 2% of body weight/d. Results indicated that Se balance were higher (p < 0.05) for those animals under supplementation than those animals under control. Overall data gathered showed a similar digestion balance of selenate and selenite in sheep. Inorganic Se, both selenate and selenite produced positive Se contents of the ruminal feed particles and protozoa. Bacterial Se increased (p < 0.05) on the first three hours post-prandially in Se supplemented diets. Gross ruminal fluid fraction, although there was improvement on their Se content under the supplemented diets, the changes were insignificant over the control. free inorganic Se and Se in soluble protein of the ruminal fluid were not significantly different for selenate and selenite. Most of the Se in the ruminal fluids of the animals under supplementation were insoluble, indicating the influence of rumen environments on Se bioavaliability.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.1
• /
• pp.91-96
• /
• 1994

This study was conducted to determine the effect of inorganic selenium (Se) sources on rumen bacterial yield, ruminal volatile fatty acid (VFA) production and total tract digestion of timothy hay (Phlewm pratense L.) in Japanese Corriedale wethers. A $3{\times}3$ Latin square design was used with three wethers, three periods and three treatments. In each period, there was 7 d dietary adjustment followed by 5 d total collection of urine and feces. Ruminal fluid samples were obtained at 0, 1, 3, 5 and 7 h postprandially on the final day of the collection period. The three dietary treatments were: (1) without Se supplementation (control); (2) with Se supplementation as sodium selenate; and (3) sodium selenite at a rate 0.2 mg Se/kg dietary DM. The basal diet was timothy hay fed at 2% of body weight/d. Results indicated that there was slight decrease in rumen bacterial yield of animal supplement with inorganic Se, however, differences over the control were insignificant. It was found that Se content of ruminal fluid was negatively correlated (p < 0.05) to rumen bacterial yield. The various VFA contents and acetate and propionate ratio of the different ruminal fluid samples were insignificant across treatment means and the same manner was observed to the different digestibilities (DM, OM, CP, NDF, ADF and NDS). This study concludes that Se supplementation at 0.2 mg Se/kg dietary DM either from sodium selenate or sodium selenite could not significantly influence rumen bacterial functions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.3
• /
• pp.372-377
• /
• 2016

The objectives of the trial were to investigate the effects of supplementing vitamin E (VE) on nutrient digestion, nitrogen (N) retention and plasma parameters of beef cattle in feedlot. Four growing Simmental bulls, fed with a total mixed ration composed of corn silage and concentrate mixture as basal ration, were used as the experimental animals. Four levels of VE product, i.e. 0, 150, 300, 600 mg/head/d (equivalent to 0, 75, 150, 300 IU VE/head/d), were supplemented to the basal ration (VE content 38 IU/kg dry matter) in a $4{\times}4$ Latin square design as experimental treatments I, II, III and IV, respectively. Each experimental period lasted 15 days, of which the first 12 days were for pretreatment and the last 3 days for sampling. The results showed that supplementing VE did not affect the nutrient digestibility (p>0.05) whereas decreased the urinary N excretion (p<0.01), increased the N retention (p<0.05) and tended to increase the microbial N supply estimated based on the total urinary purine derivatives (p = 0.057). Supplementing VE increased the plasma concentrations of VE, glucose and triglycerol (TG) (p<0.05) and tended to increase the plasma concentration of total protein (p = 0.096) whereas did not affect the plasma antioxidant indices and other parameters (p>0.05). It was concluded that supplementing VE up to 300 IU/head/d did not affect the nutrient digestibility whereas supplementing VE at 150 or 300 IU/head/d increased the N retention and the plasma concentrations of VE and TG (p<0.05) of beef cattle.

• Journal of Fashion Business
• /
• v.20 no.5
• /
• pp.102-114
• /
• 2016

The purpose of this study is to enable a scientific and rational approach for future research agenda setting in the clothing construction field. Through analysis of research papers on clothing construction published in domestic academic journals during the recent decade, the research trend of clothing construction in respective academic journals, research subjects, and research contents were grasped thoroughly. From all domestic academic associations' publication on garment/clothing and textiles/fashion, 7 academic journals were selected as subjects of research, in order to compare and analyze the research trend in the last ten years. The ten-year period ranged from April 2006 to March 2016, and a total of 735 papers published on clothing construction were used for analysis. The number of publications in the clothing construction area during the last decade has decreased, which is due to the increase in the number of clothing and textiles fashion-related academic journals, other than the 7 journals analyzed, and since the number of papers published in international academic journals has also increased. Body type, patterns, fitting test, and functional clothing accounted for the highest proportion of research themes in clothing construction. In terms of body type, there was an increasing tendency towards usage of 3D body measurement. In the patterns area, the 3D virtual dressing system was actively used. For functional clothing, sportswear, protective clothes, and innerwear were most widely researched, and ergonomic design together with smartwear was actively studied.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.166-173
• /
• 1997

The present problem of this country building market in the face of 3D, in addition to a rise in construction cost, materials problems and opening a building market to foreign countries, is finding the efficient ways of overcoming these problems. So the efficacy of form work in technical improvement becomes important through scientific methods of the design and construction as advancement in th study of strength for Permanent form mortar is possible. According to the increment of polymer-cement ration, the degree of bending strength and compressive strength and impact strength increases. The optimum volume content of glass fiber seemed to be about 2.5% considering the distribution of glass fiber, workability and economy.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.849-858
• /
• 2019

Recent developments in computer graphics technology and image processing technology have increased interest in point cloud technology for inputting real space and object information as three-dimensional data. In particular, point cloud technology can accurately provide spatial information, and has attracted a great deal of interest in the field of autonomous vehicles and AR (Augmented Reality)/VR (Virtual Reality). However, in order to provide users with 3D point cloud contents that require more data than conventional 2D images, various technology developments are required. In order to solve these problems, an international standardization organization, MPEG(Moving Picture Experts Group), is in the process of discussing efficient compression and transmission schemes. In this paper, we provide a region division transfer method of 3D point cloud content through extension of existing MPEG-DASH (Dynamic Adaptive Streaming over HTTP)-SRD (Spatial Relationship Description) technology, quality parameters are further defined in the signaling message so that the quality parameters can be selectively determined according to the user's request. We also design a verification platform for ROUTE (Real Time Object Delivery Over Unidirectional Transport)/DASH based heterogeneous network environment and use the results to validate the proposed technology.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.3
• /
• pp.235-242
• /
• 1998

This experiment was carried out to determine agronomic characteristics, nutritive value and yield (DM, CP) of Winter Rye as affected by different slurry application on the basis of N contents respectively and was arranged as a randomized complete block design with seven treatments (chemical fertilizer 160kg Nha, cattle sluny 160 . 320 480kg Nha, swine slurry 160 . 320 480kg Nha) and conducted at National Livestock Research Institute, RDA, in Suweon 6om Sep. 1996. to Apr. 1997. The results obtained are summarized as follows : Plant height and leaf length was influenced by slurry application, was orderly ranked cattle sluny 480kg N1 ha > chemical fertilizer 160kg Nha > swine slurry 480kg Nha. Tiller number was increased with cattle slurry application, especilly, the effect of cattle slurry 480kg Nha was obvious but plot of swine slurry tended not to be regular. Crude protein content of rye increased as slurry application level was increased (p< 0.05), but not significant difference was found ADF and NDF content of rye. RFV(Re1ative Feed Value) of rye as affected by slurry application was classified as Grade 2 in all treatments at harvest, according to the forage quality standard assigned by AFGC. Dry matter yield was shown fiom 4,006 kgha to 8,037 kgha as affected by cattle slurry application, in the case of swine slurry application was shown ffom 4,594 kgha to 6,230 kgha (p< 0.05).

• Animal Bioscience
• /
• v.35 no.5
• /
• pp.677-689
• /
• 2022

Objective: This study was conducted to evaluate the effects of concentrate level and chromium-methionine (Cr-Met) supplementation on the growth performance, carcass characteristics, meat quality, and fatty acid composition of Tan lambs. Methods: Sixty male Tan lambs (21±1.23 kg body weight) fed a finishing diet (concentrate-to-forage ratio: 35:65 [LC group] or 55:45 [HC group]) with daily Cr-Met supplementation (0, 0.75, or 1.50 g) were used in a completely randomized design with a 2×3 factorial arrangement of treatments. Results: Lambs from the HC group had higher average daily gain, dry matter (DM) digestibility, dressing percentages, leg proportions, intramuscular fat (IMF) contents, and saturated fatty acid levels, but lower feed conversion ratios, globulin (GLB) and total protein (TP) concentrations, shear force, and monounsaturated fatty acid (MUFA) levels (all p<0.05). Cr-Met supplementation increased the DM digestibility, GLB and TP concentrations, rack and loin percentages, and cooking loss, but decreased the IMF contents and leg proportions (all p<0.05). Cr-Met supplementation at 0.75 g/d increased the conjugated linoleic acid (CLA) content in both the HC and LC groups (p<0.01). Significant interactions between the concentrate level and Cr-Met dosage were observed for MUFA (p<0.01) and polyunsaturated fatty acid (PUFA) (p<0.01) levels. Meat from the lambs fed an unsupplemented LC diet presented the highest PUFA and MUFA levels (p<0.01). However, the MUFA and PUFA levels decreased significantly with increasing Cr-Met supplementation levels in the LC group (p<0.01), whereas the opposite trend was seen in the HC group. Conclusion: The HC diet improved the growth performance of Tan lambs, increased their profitability by increasing leg and rack joint proportions, and improved meat quality by promoting an IMF content that was more visibly acceptable to consumers. Cr-Met supplementation at 0.75 g/d in a HC diet was the best choice and may be economically beneficial.